Description
A Fountain Should Be Heard, Not the Pump Inside It. Every indoor water feature runs the same test: if the motor is audible over the falling water, the pump is wrong. The Still Current is built around a rubber-jacketed body that damps the vibration before it reaches the furniture, which is what separates a quiet pump from a pump in a rubber sleeve.
Five ratings cover the range of small water work: 3W, 6W, 10W, 15W and 25W. Choose by head height and volume rather than by habit. A tabletop fountain runs on the low end, a tiered feature or a spout wants the middle, and a pond or a large aquarium takes the 25W. The low power draw is part of the design intent, so a feature can run continuously without the electricity cost of a filter system.
Everything that touches water is sealed, and the pump sits fully submerged with a sitting mount, drawing through its own housing to avoid sucking up gravel. The 220-240V rating matches European, British and Australian mains, and each unit is supplied with the correct EU, UK or AU plug fitted for the destination. It is a modestly priced part that quietly protects a much more expensive feature.
Sizing a pump is a matter of head height rather than the size of the feature. Water has to be lifted from the reservoir to the outlet, and every centimetre of vertical rise costs flow. A tabletop fountain with a 20cm lift runs comfortably on 3W or 6W. A tiered feature that lifts water half a metre or more needs 10W or 15W to keep the top tier moving as well as the bottom. The 25W unit exists for ponds and larger tanks where the volume being circulated, not the height, sets the requirement. When in doubt, one step up is the safer choice.
The best pump is the one you forget is running.
Key Features
- ✦ Five power ratings: 3W, 6W, 10W, 15W and 25W
- ✦ Rubber-jacketed body that absorbs vibration and noise
- ✦ Fully submersible with a sitting mount
- ✦ Low power consumption for continuous running
- ✦ Suits aquariums, fountains, fish tanks, ponds and spouts
- ✦ 220-240V operation with EU, UK and AU plugs
- ✦ Compact housing that hides behind rock or gravel
Technical Specifications
- Power Ratings: 3W, 6W, 10W, 15W, 25W
- Voltage: 220-240 V
- Body Material: Rubber-jacketed housing
- Mounting: Sitting, fully submersible
- Noise: Ultra-quiet design
- Power Source: Mains 220-240V
- Suitable For: Aquariums, fountains, fish tanks, spouts, small ponds
- Plug Options: EU, UK, AU
- Variants: 15 combinations of wattage and plug type
- Design: High performance with low power consumption
Where It Belongs
Small water features live or die on their pump. This one is aimed at tabletop and floor-standing fountains in living rooms and offices, where the motor cannot be allowed to compete with the water, and at aquariums and fish tanks that need gentle circulation without stirring up the substrate. Garden users run the higher ratings in small ponds and spouts. Because the unit is fully submersible and sealed, it also suits anyone building a custom water feature who needs a dependable circulation part rather than a branded system.
Choosing the Right Rating
Measure the vertical distance from the water surface to the highest outlet before ordering. Add a margin for a filter sponge or a length of tubing, both of which reduce flow. Position the pump so its intake sits clear of gravel and substrate, and check that the outlet does not splash back onto the housing. For a fountain, the aim is a steady, quiet flow rather than a high one; a pump running well inside its rating is quieter and lasts longer than one pushed to its limit.
Frequently Asked Questions
Q: Which wattage should I choose?
Match it to the feature. Tabletop fountains use 3W or 6W, tiered and taller features use 10W or 15W, and ponds or large aquariums take the 25W.
Q: Can it run continuously?
Yes. It is designed for continuous submerged operation with low power consumption, which is why the range starts as low as 3W.
Q: Will it work in the United States?
No. All variants are rated 220-240V for EU, UK or AU mains. A plug adapter does not change the voltage.
Q: Is it safe in an aquarium with fish?
The unit is fully sealed and submersible with a sitting mount, so it runs entirely under water. Position it so the intake cannot draw in gravel or small fish.
Q: How do I stop the noise?
The rubber-jacketed body already damps most vibration. Rest the pump on a soft surface rather than directly on glass or a hard base, and keep the intake clear.
Q: How many variants are there?
Fifteen, covering the five wattage ratings across EU, UK and AU plug types.
Q: How do I measure the head height?
Measure from the water surface in the reservoir to the highest point the water has to reach. That vertical distance, not the length of the feature, sets the pump rating you need.
Q: Will a higher wattage be noisy?
The body is rubber-jacketed to damp vibration, and the range is built for quiet running. A pump working inside its rating is quieter than a smaller unit being pushed to its limit.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.