Descrizione
A battery pack does not fail all at once. One cell loses capacity a little faster than its neighbours, the pack voltage starts to sag earlier, and the BMS cuts off while the other cells still have charge left. Owners read that as a dying pack. Most of the time it is one cell and a barrel effect.
This board moves charge between cells instead of burning it off. A capacitor network shuttles energy from the highest cell to the lowest, which is why the current falls as the pack comes into balance rather than staying fixed. Balance current runs from 0 to 5.5 A, accuracy sits inside 5 mV, and the board works across 1.8 to 4.5 V per cell, covering lithium iron phosphate, ternary lithium and lithium titanate chemistries.
The practical part is the current draw at rest. A balancer that pulls 40 mA will flatten a stored pack in a season. This one sleeps below 0.1 mA with the manual switch, and drops into under-voltage sleep below 3.0 V per cell. Versions cover 3 to 4S, 12 to 16S, 17 to 21S and a smart 10 to 24S model at 4 A.
Balance the pack and you keep the capacity you already paid for.
How It Behaves On A Real Pack
- ✦ Active capacitor transfer, not resistive bleeding of excess charge
- ✦ Balance current from 0 to 5.5 A, tapering as cells converge
- ✦ Balance accuracy within 5 mV across the string
- ✦ Manual sleep switch with standby draw under 0.1 mA
- ✦ Under-voltage sleep below 3.0 V per cell protects a stored pack
- ✦ 2 oz copper PCB with low internal resistance MOSFETs
- ✦ Works with LiFePO4, ternary lithium and LTO chemistries
Balancer Specification
- Type: Active capacitor equalizer board
- Balance current: 0 to 5.5 A
- Balance accuracy: within 5 mV
- Working voltage per cell: 1.8 to 4.5 V
- String coverage: 3-4S, 12-16S, 17-21S, smart 10-24S (4 A)
- Quiescent current: about 12 mA
- Sleep current: under 0.1 mA
- Under-voltage cutoff: 3.0 V per cell
- Recommended pack capacity: 60 to 300 Ah
- PCB: 2 oz copper, low resistance MOSFETs
- Chemistries: LiFePO4, ternary lithium, LTO
Packs That Benefit Most
['Solar storage banks assembled from second-life cells are the classic case, because mixed age cells drift faster than a matched factory pack. The same board suits electric boat banks, golf cart conversions, camper lithium systems and workshop 48 V supplies built from 16S strings. Hobbyists running large LiPo or LTO packs for RC or power tools use the 4S and 6S versions to stop one weak cell from ending a pack. Anyone running a battery that measures 200 mV or more of spread between the highest and lowest cell at rest has a balancer problem worth solving before replacing cells.']
Sizing And Wiring Questions
Q: How is active balancing different from a normal BMS?
A passive BMS burns excess charge from the highest cell as heat. An active balancer moves that charge into the lowest cell, which keeps the energy in the pack and works whether the pack is charging, discharging or resting.
Q: Which version do I need for a 16S LiFePO4 bank?
The 12-16S version. Count the cells in the string and pick the range that covers it. The smart 10-24S model is the flexible option if you may change pack size later.
Q: Do I need one balancer per pack?
Yes, one board per series string. The board connects across the cell terminals of the pack it serves, so two parallel packs need two boards.
Q: Will it work while the pack is charging and discharging?
Yes. The capacitor transfer design runs continuously at any voltage inside the 1.8 to 4.5 V per cell window, so no separate balance phase is required.
Q: How fast will it bring a badly drifted pack back?
Balance current depends on the voltage difference. A 300 mV spread on a 100 Ah pack pulls near the top of the 5.5 A range, and the board will need hours rather than minutes. Bring a heavily drifted pack up with a bench supply first, then let the balancer hold it.
Q: What is the sleep switch for?
It cuts the board's own draw to under 0.1 mA when the pack is stored, which stops the balancer from flattening a bank over winter. Flip it back on when the system returns to service.
Q: Does it protect itself if a cell goes too low?
Yes. Below 3.0 V per cell the board drops into under-voltage sleep automatically and stops drawing from the string.
Q: Do I need to match it to battery capacity?
The maker recommends 60 to 300 Ah packs. Below 60 Ah the balance current is larger than the pack really needs; above 300 Ah a single board takes a long time to correct a big spread.
Q: Will it fix a pack with one dead cell?
No. A balancer equalises healthy cells. A cell that will not hold charge under any condition needs replacing, and balancing a string with a failed cell only masks the fault.
Q: Is wiring difficult?
The board connects to each cell junction in order, starting from the negative end. Use the supplied harness, check every lead with a meter before powering up, and confirm the sequence matches the silk screen on the board.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.
