The Reserve Cell | 18V Lithium-Ion Battery Pack for Milwaukee M18 Tools, 5.0 to 9.0 Ah

20%セーブ
East Supplier PlatformSKU: 1005010474015014-1PCS 9.0Ah-Charger

Color: 1PCS 9.0Ah-Charger
価格:
$144.31 $180.39

税込み 送料計算済み チェックアウト時

在庫:
在庫あり

説明

Every cordless platform lives or dies by how many charged packs you own. One battery means stopping work to wait. Three means the drill, the impact driver, and the saw keep running through a job, and the trade becomes cost per pack rather than brand loyalty.

This is a replacement pack, not an original Milwaukee product. It is built to the M18 footprint at 18 volts nominal, offered in 5.0, 6.0, and 9.0 amp hour capacities, and it is designed to fit the same tools and chargers across the M18 range. The board inside includes balance detection across the cells and a multi layer protection circuit for overcharge, over discharge, over current, and short circuit, which is what keeps a lithium pack from becoming a liability in a truck bed. The housing carries CE, FCC, RoHS, UL, and KC marks.

The honest question with any replacement pack is whether it holds capacity after a season of cycling. That comes down to the cells and the board, so this page names both rather than leaving them to the label. Higher capacity means longer runtime and more weight in the hand, so a 5.0 Ah pack is often the better daily choice and the 9.0 Ah belongs on the saw that runs continuously.

Runtime is not a feature. It is the difference between finishing and coming back.


Key Features

  • ✦ 18 volt nominal lithium-ion packs built to the M18 tool and charger footprint.
  • ✦ Capacities of 5.0, 6.0, and 9.0 amp hours for different runtime and weight trade offs.
  • ✦ Balance detection across the cell group keeps the pack from drifting out of balance.
  • ✦ Multi layer protection board against overcharge, over discharge, over current, and short circuit.
  • ✦ Certified to CE, FCC, RoHS, UL, and KC standards.
  • ✦ No memory effect, so a partially used pack can go straight back on the charger.
  • ✦ Available as single packs or as multi pack and charger bundles.

Technical Specifications

  • Brand: viedakes
  • Battery Type: Lithium-ion, rechargeable
  • Nominal Voltage: 18 V
  • Capacity Options: 5.0 Ah, 6.0 Ah, 9.0 Ah
  • Compatible Platform: Milwaukee M18 tools and chargers
  • Replaces Part Numbers: 48-11-1811, 48-11-1815, 48-11-1820, 48-11-1828, 48-11-1840, 48-11-1850, 48-59-181
  • Additional Cross Reference: 48-11-1822, 48-11-1841, 48-11-1852, 48-59-1850, 4932352071, 4932430063
  • Battery Codes: C18B, Li18, M18, M18B, M18B2, M18B4, M18BX, XC
  • Protection: Balance detection, overcharge, over discharge, over current, short circuit
  • Certification: CE, FCC, RoHS, UL, KC
  • Memory Effect: None
  • Note: Replacement battery, not manufactured by Milwaukee

Where It Belongs

Trades running an M18 platform who want enough packs to keep two tools live at once; workshops that keep a spare pack per bench so a drill never sits idle; and anyone whose original pack has reached the end of its cycle life but whose tools are still working perfectly well.

Frequently Asked Questions

Q: Is this an original Milwaukee battery?

No, and the listing says so plainly. It is a replacement pack built to the M18 footprint that fits Milwaukee M18 tools and chargers. Milwaukee is a trademark of its owner and this product is not affiliated with or manufactured by them.

Q: Will it fit my M18 drill and my charger?

It uses the M18 connection, so it fits M18 tools and M18 chargers. If your tool is a different voltage platform, this pack is not the right fit, so confirm the platform before ordering.

Q: Which capacity should I choose?

A 5.0 Ah pack is the sensible daily choice in a drill or driver, balancing runtime against weight. The 9.0 Ah pack suits saws and grinders that run continuously.

Q: Is the protection circuit actually there?

Yes. The board carries balance detection across the cells plus protection against overcharge, over discharge, over current, and short circuit, which is what protects both the pack and the tool.

Q: Do these batteries develop a memory effect?

No. Lithium-ion does not have the memory behaviour of older nickel chemistries, so a pack you topped up after ten minutes of drilling can go back on the charger without harm.

Q: How long does a charge last in storage?

Lithium packs self discharge slowly. Store them between roughly 40 and 60 percent charge in a cool dry place and top up before a job rather than leaving them full on a shelf for months.

The EastSupplier Promise

EastSupplier states that this is a replacement battery rather than an original, and lists the part numbers it cross references, because a pack that does not click into the tool is useless. Check your platform and part number against this page before ordering. Returns apply in original condition.

Customer Reviews

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Dawn P.
Cheaper than replacing the whole platform

Fits the drill and the workshop light with no wobble on the connector.

L
Luis G.
Two packs covered a full deck build

No overheat cutouts during long saw runs, which is where my old packs gave up.

P
Petr H.
Holds charge over a month in the van

Stored in a cold van and still had charge. Only complaint is the label print wears off.

B
Brian C.
Runs the impact driver like the original

Balance board inside, charges on the factory charger, and the fuel gauge reads correctly.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen