Please be know that before buying:

1. One Way Window Mirror Privacy Film provides great intended privacy ONLY during daytime. During daytime,the outside with brighter light would show a mirrore effect, people outside can't see inside of house, they see is a reflective mirror.At night,the mirror-effect disappear and become a regular window all over again since the inside is brighter than the outside, people outside would be able to SEE THROUGH the window,so at night,it is necessary to draw the curtains for privacy protection.

2. This window film only works on smooth, clean and flat glass doors and windows. Double pane glass, frosted glass, and all of the other specially crafted, processed glass is NOT workable.

3. The privacy effect of Window film will be different as the light and angle change.

4. The mirror effect means it has a slightly reflective effect, so not as perfect as real mirror.

5. About the color, take the silver color as a example, from the inside you will see a little shaded window and looking out is a very clear view and it only a little darken your view (like a tinted window). The outside will show the silver mirror effect.

What is the difference in the colors? What size should I choosePlease be know that before installation:

Blue silver--UV: 90% / IR:80% / VLT:10%

Brown silver--UV: 90% / IR:80% / VLT:10%

Silver --UV: 80% / IR:80% / VLT:25%

Black silver--UV: 90% / IR:85% / VLT:10%

Size depends on your window size, but do not worry cause our mirror tint film can be cut

Installation Instructions

Step 1: Clean the target surface of the window, make sure no stain is left.

Step 2: Measure the width and the height of the target area, cut the film and leave an extra 2-3 cm on each side for easier adjustment.

Step 3: Peel off the transparent film.

Step 4: Spray A LOT OF soapy water onto both the window surface and the backside of the static film.

Step 5: Paste the wet side of the film onto the wet glass, smooth the film with hands.

Step 6: Use the squeegee to remove extra water and bubbles from the center to the around with proper strength.

Step 7: Trim off the margins.

Step 8: Wipe out surface water with a lint-free towel.

Useful Tips for Installation:

1. Before pasting, remember to tear off the protective film.

2. Cut the film to a size of 2-3 cm from the window frame to avoid falling or curling.

3. Spray enough water onto the window and the backside of the film during the installation progress, the more, the better.

4. If you want to remove it, simply peel the window film from any corner. It comes off cleanly without residue.

5.The window film only works on smooth, clean and flat glass doors and windows. Double pane glass, frosted glass, cut glass and all of the processed glass is NOT workable.

6.Teamwork will be more helpful.