説明
SPECIFICATIONS
Brand Name: Anruhoo
Origin: Mainland China
Model Number: IC+ID Ring
Certification: none
Choice: yes
semi_Choice: yes
Caution:
The ID (125KHZ) Chip Is The T5577 Chip, The Card Number Is Empty, It Needs To Be Read After Writing.
The IC Chip (13.56Mhz) Is A CUID Chip.(Please make sure the machine supports writing to CUID card)
Please Use A Professional RFID Duplicator When Copying, If You Need, Please Contact Customer Service.
Specific measurement methods:
Please use a thin line or paper strip to measure the circumference of the finger wearing the ring, and select the number corresponding to the size chart above.
1. Use a thin, non-elastic rope.
2. Make a circle around the place where you wear the ring and tighten the measuring line.
3. Use a ruler to measure the length of the rope.
Precautions:
1. Use thin paper strips or ropes to measure the position of your fingers. Do not measure the finger joints. Make a mark where the paper strips or ropes overlap.
2. During the test, be sure to tighten the paper strip or rope, measure multiple times and take the average, and control the error within 1MM to avoid abnormal differences.
Sizes (US sizes available): 6/7/8/9/10/11/12/13
Ring diameter: 16.5mm/17.3mm/18.2mm/18.9mm/19.8mm/20.7mm/21.3mm
In terms of appearance, it basically matches the picture. If there are slight deviations, please refer to the actual product.
Packaging: RFID smart ring
The ring size error is less than or equal to 1MM, you can choose the size you need! Please refer to the actual product!
About writing cards:
The ID writing area is the inner diameter marking area, and the IC is in the middle position corresponding to the marking (that is, the other side of the circle diameter, please try)
Please see the picture below.
Оплата и безопасность
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません