説明
YE-Z2S automatic double end chamfering machine is suitable for copper tube, aluminum tube. It can be chamfered inside, outside angle and end face.
This machine provides semi-automatic loading, feeding, and chamfering process. Its diameter ranges from 40 mm to 280 mm. It is a pipe processing method.
Overview
Equipped with a PLC control system, YE-Z2S automatic double head chamfering machine is convenient to operate, simple to maintain, fast feeding of the cylinder, synchronous clamping, double head chamfer feeding at the same time, feed speed can be adjusted according to need.
Manual discharging control feeding.
The center point is easy to adjust, and the length and size are adjusted by rack and pinion, which is accurate and stable.
The cutter head adopts taper type, which is easy to grind.
Technical Parameters
project | Technical parameters |
The power supply voltage | 380v 50Hz |
The external air pressure | 0.6-0.8MPa |
The workpiece length | 40-280mm |
Machining diameter | pipe tube ∅5-∅30,bar tube ∅5-∅30 |
Processing speed | Processing times 30 to 40 times per minute |
The length of tolerance | ±0.05mm |
The motor power | 0.75KW/1.1KW |
Spindle speed | 1400r/min.2800r/min |
Feeding way | Hands up/automatic bin |
Processing range | Suitable for all kinds of metal pipe. Inside. Outside. Two head chamfering flat bar |
Machine size/weight | 1220mm*800mm*1430mm/400kg |
Manufactures Description
An automatic double head chamfering machine describes the finishing process of machined parts. Chamfering means to make bevels, grooves, or furrows.
Deburring is to remove any rough ridges, edges or areas from a part after molding. The conversion time to another diameter or length is relatively short.
This is suitable for copper tube, aluminum tube double-ends chamfering flat bar.
The chamfering unit is equipped with a variety of cutting plates, which can chamfer inside and outside the pipe and make precise flat edges.
Оплата и безопасность
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません