Descrizione
Smaller Does Not Mean Lesser. It Means Focused.
The Spark Keeper is a 12Ah LiFePO₄ battery that refuses to apologize for its size. Where the 100Ah iron giants dominate the RV bay, the Spark Keeper slips into a kid's ride-on car, powers a camping CPAP through the night, or keeps a 12V fish finder scanning the depths while the boat drifts. It is the battery you grab when the assignment is compact power, not bulk storage — and it executes that assignment with the same lithium iron phosphate chemistry, the same built-in Battery Management System, and the same 4,000-cycle lifespan as its larger siblings.
At 3.3 pounds, it weighs less than a bag of flour. Yet it stores 154 watt-hours of usable energy — enough to run a 12V LED camping light for 15 hours, a portable fan through a hot summer night, or a CPAP machine without the humidifier for a full sleep cycle. The integrated BMS protects against the usual enemies of battery chemistry: overcharge, deep discharge, short circuit, and thermal runaway. Plug it in, forget about it, and trust that the Spark Keeper will be ready when you reach for it.
Not every mission requires a battleship. Some call for a precision instrument.
Key Features
- ✦ LiFePO₄ Chemistry: 4,000+ deep cycles, zero maintenance, no thermal runaway risk — fundamentally safer than standard lithium-ion
- ✦ Integrated BMS: Cell-level protection against overcharge, over-discharge, overcurrent, short circuit, and temperature extremes
- ✦ 154Wh Usable Capacity: Perfectly sized for CPAP machines, fish finders, LED lighting, kids' ride-on cars, and portable electronics
- ✦ 3.3 lbs (1.5 kg): Ultralight — carry it in a backpack, mount it anywhere, install it with one hand
- ✦ Wide Compatibility: Standard 12V output works with most RV, marine, and portable electronics designed for lead-acid replacement
- ✦ Long Shelf Life: Negligible self-discharge rate — stores for 12+ months without maintenance charging
- ✦ F2 Terminal Type: Standard 0.250" faston/spade connectors for easy wiring into existing systems
Technical Specifications
- Nominal Voltage: 12.8V
- Nominal Capacity: 12Ah (154Wh)
- Chemistry: Lithium Iron Phosphate (LiFePO₄)
- BMS Protection: Overcharge, Over-discharge, Overcurrent, Short Circuit, Thermal
- Cycle Life: ≥4,000 cycles at 80% DoD
- Weight: 3.3 lbs / 1.5 kg
- Terminal Type: F2 (0.250" faston/spade connectors)
- Charge Voltage: 14.4V recommended, 14.6V max
- Max Continuous Discharge: 12A (suitable for most 12V portable applications)
- Operating Temperature: Charge 0°C–45°C, Discharge -20°C–60°C
Application Scenarios
The Spark Keeper is the battery you didn't know you needed until the moment you need it. Parents of young children install it in Power Wheels and electric ride-on cars, replacing short-lived SLA batteries with a drop-in upgrade that outlasts the toy itself. Campers pair it with a 12V CPAP adapter for silent, fuel-free sleep support deep in the backcountry. Kayak anglers wire it to a fish finder and spend the entire day on the water without worrying about a dead battery at the crucial moment. Ham radio operators trust it for field day operations where grid power is a distant memory. Disaster preparedness kits benefit from its 12-month shelf life — charge it once, store it, and know it will deliver when the situation demands. Compact enough for a glovebox, capable enough for lifesaving equipment.
Frequently Asked Questions
Q: Can this battery replace a 12V 12Ah SLA battery in my kid's ride-on car?
A: Yes — this is one of the most popular use cases. The Spark Keeper is a direct voltage-compatible replacement for 12V sealed lead-acid (SLA) batteries of the same capacity. It is lighter, charges faster, lasts 8-10× longer, and maintains consistent voltage throughout discharge so the ride-on car doesn't slow down as the battery depletes. Note: use a LiFePO₄-compatible charger (14.4V), not the original SLA charger, to achieve full capacity.
Q: How long will it run a CPAP machine?
A: A typical CPAP machine without heated humidification draws approximately 1-2A at 12V. At 12Ah capacity, the Spark Keeper provides 6-12 hours of runtime depending on your pressure settings — sufficient for a full night's sleep. With heated humidification (4-5A draw), expect 2-3 hours. For nightly use, consider the larger 100Ah Iron Current or keep a spare Spark Keeper charged.
Q: What charger do I need?
A: Use a LiFePO₄-compatible charger set to 14.4V (absorption) and 13.6V (float). Standard lead-acid chargers will work partially but may not achieve full capacity because their absorption voltage (14.6-14.8V) is slightly higher than optimal for LiFePO₄. A dedicated LiFePO₄ charger costs $15-30 and maximizes both capacity and cycle life.
Q: Can I connect multiple Spark Keepers in parallel for more capacity?
A: Yes — connect up to 4 in parallel for 48Ah at 12V. Ensure all batteries are at the same state of charge before connecting. The built-in BMS in each battery handles internal cell balancing; external balancing between batteries is not required for parallel configurations.
Q: Does the low-temperature charging protection matter for indoor use?
A: For indoor use in heated spaces, the low-temperature cutoff rarely activates. However, if you use the battery in an unheated garage, shed, RV during winter storage, or outdoor camping below 32°F (0°C), the BMS will prevent charging — this protects the cells from permanent lithium plating damage. The battery can still discharge at temperatures down to -4°F (-20°C).
Q: How does this compare to a standard lithium-ion (Li-ion) battery?
A: LiFePO₄ has three critical advantages over standard Li-ion (LiCoO₂/NMC) for portable power applications: (1) Thermal stability — LiFePO₄ does not experience thermal runaway, making it inherently safer for indoor and vehicle use; (2) Cycle life — 4,000+ cycles vs. 500-1,000 for Li-ion, giving you 8-10× the service life; (3) Voltage stability — LiFePO₄ maintains a nearly flat discharge curve at 12.8V until nearly depleted, while Li-ion voltage sags continuously. The tradeoff is slightly lower energy density, which is why the Spark Keeper weighs 3.3 lbs rather than 2.5 lbs for an equivalent Li-ion pack.
Q: Will this work with my solar charge controller?
A: Yes, if your solar charge controller has a LiFePO₄ or user-configurable profile. Set absorption to 14.4V, float to 13.6V, and equalization to OFF (or 14.4V). Most modern MPPT and PWM controllers support LiFePO₄ profiles out of the box.
Customer Reviews
Оплата и безопасность
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.