The Paper Route | Mobile Printer Cart with Seven Shelves

East Supplier PlatformSKU:1005009078207266-WHITE-GERMANY

Color: WHITE
Prezzo:
$155.52

Tasse incluse spese di spedizione calcolata al pagamento

Disponibilità:
Disponibile

Descrizione

A home office fails at the edges. Not at the desk, where the work actually happens, but in the metre around it: the paper that has nowhere to live, the spare toner, the files that mattered last quarter and might matter again. The Paper Route is a trolley built to absorb that metre.

It is cut from chipboard finished in melamine resin at 60 by 75 by 35 centimetres, arranged as seven open compartments with a further adjustable shelf at the base. Three sides are open, so nothing has to be lifted out to see what is in it, and the base shelf can be raised or dropped to separate thin folders from bulky ones. The carcass is rated to 60 kilograms and weighs about 17 of them, which is light enough to push with one hand.

Four castors do the moving, two of them braked so it stays where it is put, and the finish is a flat white that recedes against a wall instead of competing with it. It arrives flat packed at 78 by 48 by 18 centimetres with instructions, and assembles in about the time it takes to empty one drawer of the things that have been quietly accumulating in it.

Order is not a personality trait. It is a piece of furniture in the right place.


What the Cart Carries

  • ✦Seven open compartments plus an adjustable base shelf
  • ✦60 x 75 x 35 cm footprint that fits beside a desk or under a window
  • ✦Melamine resin finish over chipboard, wipe clean, flat white
  • ✦Rated to 60 kg against a 17 kg carcass
  • ✦Three sides open, so nothing needs unpacking to be found
  • ✦Four castors, two with brakes, rolling on carpet or hard floor
  • ✦Adjustable lower compartment for folders and bulky files
  • ✦Ships flat at 78 x 48 x 18 cm with assembly instructions

Technical Specifications

  • Product dimensions 60 x 75 x 35 cm (width x height x depth)
  • Package dimensions 78 x 48 x 18 cm
  • Material chipboard with melamine resin coating
  • Colour white
  • Storage 7 open compartments plus 1 adjustable base shelf
  • Access open on three sides
  • Load capacity up to 60 kg
  • Unit weight approximately 17 kg
  • Mobility 4 castors, 2 fitted with brakes
  • Assembly flat packed, instructions included
  • Intended use home office, study, commercial office

Where It Ends Up

The obvious placement is beside a printer, holding paper below and consumables above, which is what it was drawn for. It also works as a mobile filing station in a small practice where files travel between rooms, as a supply cart in a clinic reception, as a tool and consumable trolley in a workshop that has run out of wall, and as a return-and-refill point in a classroom. The common thread is a space that needs storage which can move: nothing here requires a wall, a drill or a decision that will be regretted at the next reorganisation.

Questions From the Home Office

Q: Does it arrive assembled?

A: No. It ships flat packed at 78 x 48 x 18 cm with instructions and assembles with ordinary household tools.

Q: Will a standard printer fit on top?

A: The top surface is 60 cm wide by 35 cm deep, which covers the footprint of most desktop laser and inkjet units. Check the depth of a large multifunction machine before ordering.

Q: How much weight can it hold?

A: Up to 60 kg in total, so a printer plus a full paper supply plus files stays well inside the rating.

Q: Do the castors mark hard floors?

A: They are standard furniture castors intended for carpet and hard flooring. Two are braked, so it can be locked in place once positioned.

Q: Is the finish waterproof?

A: The melamine resin surface is wipe clean and resists spills, but the carcass is chipboard, so standing water should not be left on it.

Q: Can I adjust the shelving?

A: The base shelf is adjustable in height to separate folders from bulky items. The seven upper compartments are fixed.

Q: Is it available in other colours?

A: This listing is the white FBT68-W. The same frame is offered elsewhere in oak and other finishes if the room calls for it.

Q: Can it be taken apart again for moving?

A: Yes. It is a bolted flat pack construction, so it can be disassembled and rebuilt rather than dragged as one piece.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Priya Z.
Solid once built, instructions are thin

Took about forty minutes to assemble and the diagram assumes you have built flat pack before. Once together it is rigid, no wobble, and the melamine wipes clean when a toner cartridge leaked.

C
Curtis H.
Rolls loaded, stays put braked

Loaded it with a laser printer, a box of toner and a full suspension file run, well under the sixty kilos it is rated for. The two braked casters hold it on laminate flooring without creeping.

M
Marianne J.
It fits the gap beside the desk exactly

Sixty by thirty-five is the measurement that mattered and it slots in beside the desk with the printer on top and two reams of paper underneath. Three open sides means I can see everything without pulling drawers.

Payment and Security

PayPal

Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.

Previsione di spedizione

You may also like

Recently Seen