Descrizione
SPECIFICATIONS
Brand Name: Trianglelab
Hign-concerned Chemical: none
Origin: Mainland China
Item Type: extruder
Model Number: Orbiter Extruder V2.0
▉Name:
Orbiter Extruder V2.0(1.75mm)
Warning: Orbiter V2.0 has special gears. This is different from V1.5 gears. We will soon find a way to sell gears compatible with V2.0. Please don't buy the wrong gear.
▉Features:
1.Shorter drive gears 11mm vs 15mm
2.Hardened filament drive gears
3.Weight reduced to ~135 grams
4.Smaller more compact dimensions (11.6% shorter)
5.New motor design offers ~40% increase in pushing force in real printing conditions and much improved
acceleration performance
6.Flipped drive gears – filament path closer to the extruder center for a more balanced design and perfect
fit on delta printers as well
7.Stainless steel filament exit guide with 0.2-0.3mm clearance to drive gears for best TPU printing
experience and extreme wear resistance when using abrasive filaments.
8.High temperature resistant injected housings, GPA12
9.Machined PEEK secondary drive gear sleeve
10.Tension mechanism with grab screw design (Captive Grab Screw)
11.Mounting screws in line with filament exit path – improving housing stiffness and easier mounting
12.Perfectly aligned filament path
13.New smaller and better PTFE input coupler
14.Motor position rotated by additional 10 degrees for easier maintenance and assembly
15.Filament sensor add on with auto load and unload button add on feature
16.And many more small changes to improve mechanical accuracy and design look
▉Basic Configuration:
• Steps: 690 steps/mm @ 16 micro-stepping
• Max. instantaneous speed change (jerk): 600mm/min(RRF), 10mm/s
(Marlin) (recommended 300/5)
• Pressure advance: 0.02~0.03s - to be calibrated
• Retraction: 1~1.5mm - to be calibrated
• Retraction speed: 120mm/s
• Motor current: 1.2A Peak or 0.85A RMS (LDO-36STH20-1004AHG)
• Acceleration: 10000 mm/s2 *
• Normal motor operating temperature: 60-75°C
* The extruder itself without filament can handle acceleration up to
25000mm/s2. Adding weight of the filament it drags along its
recommended to have acceleration limit set not above 10000mm/s2
▉EXTRUSION PERFORMANCE:
Optimized the motor
design to maximize its
torque in the speed range
the extruder needs it.
design to maximize its
torque in the speed range
the extruder needs it.
The result is ~40% increase
of the pushing force in real
printing conditions.
of the pushing force in real
printing conditions.
Retraction speed up to
120mm/s
120mm/s
Acceleration up to
3000mm/s2
3000mm/s2
▉More information:
https://trianglelab.net/u_file/2112/11/file/OrbiterV20Release-a447.pdf
https://trianglelab.net/u_file/2112/11/file/Orbiterv20FirmwareConfiguration-031c.pdf
▇Two colors of gears are shipped randomly
According to the warehouse situationthe two colors of gears are shippedrandomly, please understand
Оплата и безопасность
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.