NOTE:This switch can be work at both of without Neutral wire and with neutral wire,perfectly compatible with these two wiring methods.If your House wiring is without neutral Wire, A capacitance is a must to be connected to both ends of the bulbs for normal work.

Specification

Type: 1/2/3 Gang Touch Wi-Fi Switch
APP: Apple Homekit
Wi-Fi: 2.4G
Material: PC V0 fireproof + tempered glass panel
Rated Voltage: AC 100V-240V
Load Power:3-300W/gang(Note:If it is used for LED or energy saving bulb,the power load should be less than 100W)
Wi-Fi: 2.4GHz, IEEE 802.11 b/g/n
Support by : iOS
Wireless Power Consumption: <0.3W
Security mechanism: WPA-PSK/WPA2-PSK

Features

Voice Control: Compatible with Apple HomeKit, Once set up, Siri can act as your personal butler, by turning on/off your smart switch.

App Remote Control: Set up your Apple TV, or iPad as a home hub, then you can control the HomeKit accessories remotely. and there is no distance limit. Suitable for any 2.4GHz or dual-band WiFi router. No hub is required.

Easy Setup & Group Control: It works with Apple HomeKit,Simply use smart WiFi switch and scan the HomeKit code, integrate and set up it, No require to install others APP.

No Hub required for set up: At anytime anywhere Immediately start controlling your Switch with quick and easy set up using wifi on your compatible Apple iOS device with the Apple Home App.

The intelligent timer switch will automatically turn on after setting a timer for this switch, which is essential for daily scheduling, and bring you a comfortable and intelligent lifestyle

Tips

Be sure that you are using 2.4GHz WiFi when connecting with the smart bulb. And WiFi must be detectable status. Many routers have 5 GHz and 2.4 GHz network and your phone will always automatically connect to the 5 GHz network. So, you have to completely turn off your 5 GHz network by going to your router settings (enter the router IP address into your internet browser, usually something like 192.168.1.1), forcing your phone to connect to the 2.4 GHz network.