Description
The back of a lower cabinet is where usable space goes to die. Things go in, nothing comes out, and within a year you own three identical jars of cumin because the second one was behind the first. A pull out shelf fixes that by changing the geometry of reach: instead of an arm disappearing into a dark box, the entire shelf comes to you on three steel tracks that were cycled more than forty two thousand times before the design was signed off.
The mechanism is the product. Carbon steel body, three track slides, and a silent glide that stays silent because the tracks are loaded evenly rather than cantilevered. Width adjusts to fit the cabinet you already own, so there is no measuring twice and hoping, and the install is adhesive first with an optional screw fix for anyone who wants it permanently mounted. No drilling means no ruined shelf board and no negotiation with a landlord.
What you gain is depth. Pots stack vertically instead of disappearing rearward, spice jars line up in a single visible row, and the pan you use four times a week stops being an archaeological exercise. The surface is corrosion resistant, wipes clean with a damp cloth, and carries the weight of cast iron without bowing at the front edge, which is where cheap slides fail first.
Storage is not about how much you own. It is about how quickly you can reach the thing you need.
What you are actually buying
- ✦ Adjustable width that fits standard lower cabinets without cutting or drilling.
- ✦ Three track carbon steel slides, tested past 42,000 open and close cycles.
- ✦ Silent glide action that stays quiet under a full load of pans or jars.
- ✦ No drill adhesive mounting with an optional screw fix for permanent installs.
- ✦ Corrosion resistant finish that wipes clean and resists kitchen humidity.
- ✦ Full extension travel, so the back of the shelf becomes front row storage.
- ✦ Available in white or black, as a single unit or a two piece set.
Technical Specifications
- Material: Carbon steel with corrosion resistant coating
- Mounting: Adhesive strips, optional screw fix
- Slide system: Three track full extension, rated past 42,000 cycles
- Width: Adjustable to cabinet opening
- Colours: White, Black
- Configuration: Single unit or two piece set
- Load: Holds cast iron cookware and full jars without front edge bowing
- Cleaning: Damp cloth, mild detergent, no abrasive pads
- Install time: Under 15 minutes per shelf
- Best for: Base cabinets, pantry shelves, under sink storage
Where it belongs
Best suited to base cabinets between 30 and 60 cm wide, where the rear third is currently dead space. It earns its place in a rented kitchen because the adhesive mount leaves no holes, and in a family kitchen because a single visible row of jars ends the duplicate purchase problem. Also useful under a sink for cleaning supplies, in a pantry for cans, and in a laundry cabinet where bottles tend to migrate to the back.
Questions buyers actually ask
Q: Will the adhesive hold a shelf full of cast iron?
The adhesive is rated for the shelf plus a normal kitchen load, and the optional screw fix is there for anyone who wants certainty with heavy cookware. If your cabinet floor is uneven or the surface is greasy, clean it with alcohol first, and use the screws for cast iron. Most buyers start adhesive and add screws later if needed.
Q: Does it fit a cabinet with a centre divider?
Not across the divider. Each shelf fits one bay. Measure the clear opening of a single bay, inside face to inside face, and order one unit per bay. A two piece set suits a cabinet with two narrow doors.
Q: How much width adjustment is there?
Enough to cover normal cabinet variation rather than a custom fit. It adjusts to the opening rather than being cut to size, which is what makes a no drill install possible. Check the clear opening before ordering, since the front frame and door hinges reduce the usable width.
Q: Will it interfere with the cabinet door closing?
No, provided you mount it flush to the shelf front. The shelf sits inside the cabinet line, so the door closes on the original frame. Leave a small gap at the front and check the swing before pressing the adhesive down.
Q: Can it be moved later?
Adhesive mounted units can be removed, but the strip is single use. Order a replacement strip if you plan to relocate it. Screw mounted units leave small holes that are easy to fill. Neither method damages the shelf structure.
Q: How do I clean the tracks?
Vacuum the channel, then wipe with a dry cloth. Do not oil the slides; kitchen grease attracts dust and turns into a grinding paste. If a slide starts to feel rough, a dry silicone spray is the correct fix, not a wet lubricant.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.