Description
Dirty power does not announce itself. It shortens the life of everything downstream. A modified square wave inverter will run a lamp and charge a phone, and it will do it for years without complaint. Then it meets a fridge compressor, a laser printer, a medical device or an induction motor, and the failures begin - buzzing transformers, running hot, controllers dying at eighteen months instead of ten years. Nothing is visibly wrong. The power is simply the wrong shape.
This inverter produces a pure sine wave, the same waveform the grid delivers, from a DC input of 24V or 48V depending on the model, stepping up to an AC output of 220V with a plus-or-minus 10 percent tolerance at 50Hz. Conversion efficiency is rated at 90 percent, the socket takes universal plugs, and the power tiers run from 500W class units up to 6,000W, 7,000W and 8,000W configurations for heavier loads. An aluminium heat sink with LED status indication handles thermal management and gives you a visual read on the unit's state, and the whole range carries CE certification.
The practical version of that specification is simple: motors start without a growl, switch-mode power supplies run at their rated temperature, and audio equipment does not pick up a hum that nobody can trace. If the loads on your system have electronics or windings in them, the waveform is the specification that matters most.
The grid never had to think about waveform. Off-grid, it is the whole argument.
Key Features
- ✦ Pure sine wave AC output matching grid-quality waveform for motors and electronics.
- ✦ DC 24V and 48V input variants covering vehicle, battery bank and solar applications.
- ✦ 220V AC output at 50Hz with a plus-or-minus 10 percent tolerance.
- ✦ 90 percent conversion efficiency, reducing heat and wasted battery capacity.
- ✦ Universal AC socket accepting the common international plug types.
- ✦ Power tiers from 500W class through 6,000W, 7,000W and 8,000W configurations.
- ✦ Aluminium heat sink body with LED status indication for thermal monitoring.
Technical Specifications
- Brand: TATALIKEN
- Output Waveform: Pure sine wave
- Input Voltage: DC 24V / DC 48V (model dependent)
- Output Voltage: AC 220V +/- 10%
- Output Frequency: 50 Hz
- Conversion Efficiency: 90%
- Socket Type: Universal
- Power Tiers: 500W class through 6,000W / 7,000W / 8,000W configurations
- Cooling: Aluminium heat sink with LED indication
- Certification: CE
Where It Works
This is the piece that sits between a battery bank and the appliances that depend on it. Van and camper conversions use it to run a compressor fridge, a laptop charger and power tools from a lithium or lead-acid bank. Off-grid cabins and rural workshops use it where the load includes pumps, welders and induction motors. Marine installations use it for refrigeration and navigation electronics. Backup power setups use it for medical devices, network cabinets and security systems that fail in unpleasant ways when fed an approximated waveform. In each case the requirement is the same: motors and electronics treated as though the grid were still there.
Frequently Asked Questions
Q: What is the difference between pure sine wave and modified sine wave?
A: Pure sine wave is the smooth alternating waveform the mains supply produces. Modified or square wave approximations are cheaper to build and cause motors to run hotter, transformers to buzz and electronic power supplies to work harder. Appliances with motors, compressors or switching supplies generally specify pure sine wave for exactly this reason.
Q: Which input voltage do I need?
A: Match the inverter to your battery bank: a 24V bank needs a 24V input unit and a 48V bank needs a 48V input unit. Higher input voltage means lower current for the same output power, which reduces cable thickness and resistive losses - a real advantage on larger installations.
Q: How do I size the power rating?
A: Add up what runs at the same time and then account for start-up surges. A fridge compressor or a pump can draw several times its running current for a second or two on start. If you plan to run motors, choose a tier above your calculated steady load, or stagger start-ups.
Q: Can I leave it connected permanently?
A: Yes, provided it has ventilation. The aluminium body uses the case as a heat sink, so it needs air movement around it and should not be boxed in or mounted against an insulating surface. Keep it away from fuel vapour and battery venting.
Q: Is a 50Hz output a problem in a 60Hz country?
A: It matters for equipment with synchronous motors or frequency-sensitive timing - some clocks, older audio gear and certain appliances. Modern switch-mode electronics mostly do not care. Check your critical loads; if frequency-sensitive equipment is on the list, confirm the correct model for your region before ordering.
Q: Does it charge the battery as well?
A: No. This is an inverter, not a charger or a hybrid unit. It converts DC to AC. Charging your bank from solar or mains is handled by a separate charge controller or charger, unless you choose a hybrid inverter that combines both functions.
The EastSupplier Promise — every unit is inspected, packed for export, and shipped from a vetted factory line. If the specification differs from what is described here, we replace it. No middlemen, no relabelled stock, no surprises at the border.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.