Description
Power Is Not a Utility. It Is a Decision. Every off-grid system eventually asks the same question of its owner: will you buy your electricity from someone else, or will you manufacture it yourself? The Grid Forge is the answer for people who have already decided. It converts a 24V battery bank and a PV array into clean, stable 110V/120V household current, and it does so with the quiet confidence of equipment that was designed to run continuously rather than impressively.
At the centre of the unit sits a 140A MPPT solar charger capable of harvesting up to 5600W from an array ranging across 55V to 350VDC. That wide window matters: it accepts panel configurations that cheaper controllers reject outright, which means fewer strings in parallel, thinner cable runs, and less energy lost on the way in. Conversion efficiency holds above 95% under rated resistive load, and the output is a genuine pure sine wave, so motors in refrigerators, pumps and farm tools start without the growl and heat that modified-wave inverters inflict on them.
The interface is deliberately physical. A 6.25-inch LCD sits under a glass-top cover with touch buttons, and the unit allows you to switch the AC output between 110V and 120V from battery mode, set charge-source priority between utility, battery and PV, and read live system state without a phone or a cloud account. Built-in lithium battery activation wakes a sleeping BMS; RS232 and RS485 ports allow wired monitoring, and optional WiFi adds remote telemetry. Overload, over-temperature and short-circuit protections are standard, and cold restart means the system rebuilds itself after a deep shutdown rather than waiting for a technician.
This is not a battery accessory. It is the operating system of an independent property.
Key Features
- ✦ 4000W / 4KVA continuous pure sine wave output, switchable between 110VAC and 120VAC in battery mode
- ✦ Built-in 140A MPPT charge controller accepting up to 5600W of PV input across a 55VDC-350VDC window
- ✦ Unique glass-top cover with 6.25-inch LCD and touch-button control - no app and no account required
- ✦ Multi-chemistry battery support: LiFePO4, lithium, flooded, gel and lead-acid at 24VDC
- ✦ Utility, battery and PV sources complement each other with configurable input priority
- ✦ RS232 / RS485 communication plus optional WiFi monitoring and lithium BMS auto-activation
- ✦ Anti-dust kit option and over-load, over-temperature and output short-circuit protection
Technical Specifications
- Model: POW-LVM4.5K-24V / POW-LVM4-24V
- Rated Output Power: 4KW / 4KVA
- Output Waveform: Pure Sine Wave
- Battery Voltage: 24VDC - LiFePO4, Lithium, Flooded, Gel, Lead-acid
- Max PV Array Power: 5600W
- MPPT Output Current: 140A
- PV Array MPPT Voltage Range: 55VDC - 350VDC
- Nominal Input Voltage / Frequency: 120VAC, 50Hz / 60Hz auto-detection
- Output Voltage Range: 110VAC / 120VAC
- Efficiency: Above 95% at rated resistive load, battery fully charged
- Floating Charging Voltage: 27VDC with 3-step charging algorithm
- Dimensions / Weight: 400 x 250 x 89 mm / 8.5 kg
Where It Belongs
The Grid Forge is built for the places where the grid either does not reach or cannot be trusted. It runs cabin refrigeration, lighting and water pumps through a Northern winter; it powers farm tools, fence energisers and irrigation timers where the nearest transformer is half a kilometre away; and in an RV or overland build it replaces a generator without the noise, the fuel or the maintenance cycle. Solar installers specify it for telecom cabinets and remote monitoring stations, and off-grid households use it as the single point where PV, battery and utility converge. Because it accepts five battery chemistries and a PV window that most competitors cannot match, the same unit can start life on a small array and grow with a property rather than be replaced by it.
Frequently Asked Questions
Q: Can I use this with a 24V lithium battery that has a BMS?
Yes. The unit supports LiFePO4 and lithium banks at 24VDC and includes automatic lithium battery activation, which wakes a BMS that has gone to sleep after a deep discharge. Charging follows a 3-step algorithm with a 27VDC float stage, and the charge curve can be adjusted through the LCD to match the specific bank.
Q: What size solar array should I pair with it?
The MPPT stage accepts up to 5600W with a 55VDC-350VDC input window and a 140A charge current. A practical array for most homes is 1500W to 3000W depending on daily consumption, but the wide voltage window means you can wire panels in series for higher voltage and lower current, which reduces cable losses.
Q: Will it run a refrigerator or a well pump?
Yes. The output is a true pure sine wave at 4000W continuous, which is what induction motors and compressors need. Modified-wave inverters cause refrigerators to run hot and pumps to hum; a pure sine wave source starts them cleanly and keeps them within their design tolerances.
Q: Does it need WiFi or an app to operate?
No. Everything can be configured and read locally on the 6.25-inch LCD with touch buttons, including AC voltage, input priority and fault history. WiFi monitoring is an optional extra for remote telemetry, and RS232 / RS485 are available for wired integration with a logger or home system.
Q: Can it take power from both the grid and solar at the same time?
It can. Utility power, battery and PV complement each other, and you configure the priority order on the LCD - for example PV first, then battery, then utility as a final fallback. That behaviour is what makes the unit useful in hybrid installations rather than only in fully off-grid ones.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.