Description
A Folding Phone Is a Compromise Until the Case Stops Acting Like One.
Every clear case built for a foldable device announces itself the moment you close it: a bulging seam at the hinge, a lip that catches on the pocket lining, a magnet ring thick enough to feel through the panel. The Foldline starts from the opposite premise. The hinge is not an obstacle to wrap around, it is the part of the object worth designing for, and the case is shaped around that joint rather than pressed over it.
The bracket that runs along the fold is a separate structural piece, not a bend in the same sheet of plastic. That distinction matters in the hand. Where a single-moulded case flexes and slowly clouds the screen protector at the crease, a bracketed hinge stays rigid and keeps the two halves aligned while the panel itself remains slim enough to read the colour of the device underneath. The back is hard polycarbonate with a UV-stable clear coat, the frame is a soft TPU that absorbs impact at the corners, and the two are bonded along a channel that hides the transition line.
The magnetic array sits behind the back panel rather than on top of it, so accessories attach flush and wireless charging coils keep their full alignment. Ports are covered with plug-in dust caps that stay attached to the shell, which is the difference between a case that survives a year of pockets and one that collects lint in the charging port within a month. The transparent finish is deliberately unfrosted: fingerprints wipe away, and the device colourway stays visible instead of sitting under a milky haze.
The fold is the feature. The case is what finally lets you stop thinking about it.
Key Features
- ✦ Dedicated hinge bracket that flexes independently of the back panel
- ✦ Hard polycarbonate back with UV-stable clear coating that resists yellowing
- ✦ Soft TPU frame with reinforced corner geometry for drop absorption
- ✦ Recessed magnetic ring for flush accessory attachment and full wireless charging support
- ✦ Tethered dust caps over the charging port and speaker cut-outs
- ✦ Anti-scratch inner lining that keeps grit away from the device finish
- ✦ Full-coverage edge protection with a raised camera lip
Technical Specifications
- Main material: Polycarbonate back panel with TPU frame and metal hinge bracket
- Finish: High-clarity transparent, unfrosted, anti-scratch coated
- Magnetic system: Recessed ring array, accessory and charger compatible
- Hinge design: Independent flex bracket with concealed bond line
- Coverage: Full body, four-corner reinforcement, raised camera lip
- Protection features: Shockproof, anti-scratch, dustproof with tethered port caps
- Compatibility: iPhone 18 Duo (folding model), Clear colourway
- Pattern: Plain transparent with printed structural detailing
- Installation: Two-piece snap fit, no adhesive
- Care: Wipe with a dry microfibre cloth; avoid alcohol-based cleaners
Application Scenarios
This is a case for the person who bought a folding phone for the form factor and then spent three months annoyed by every accessory made for it. It suits daily commuters who close the device a hundred times a day and want the hinge to stay quiet, travellers who need the magnetic ring to hold a wallet or car mount without shimming, and anyone who paid for a colourway and would like to keep looking at it. The clear shell also makes it the practical choice for a shared household device, since the phone underneath stays identifiable at a glance.
Frequently Asked Questions
Q: Does the case interfere with wireless charging?
A: No. The magnetic array sits behind the back panel, so alignment is preserved and the charger does not need to be repositioned. Charging through the case is the intended use, not a workaround.
Q: Will the clear material turn yellow?
A: The back panel is polycarbonate with a UV-stable clear coat rather than a soft TPU sheet, which is the construction that resists yellowing under sunlight. Wiping it with a dry microfibre cloth keeps the surface clear.
Q: How does the hinge bracket stay attached?
A: It is a separate structural piece bonded into a channel along the fold, so it flexes with the hinge instead of stretching a single moulded sheet. The bond line is concealed inside the channel.
Q: Can the case be removed often without loosening?
A: Yes. It is a two-piece snap fit with no adhesive. The TPU frame returns to shape after removal, though frequent removal is not necessary since the ports are capped.
Q: Does it cover the charging port and speakers?
A: It covers them with tethered dust caps that stay attached to the shell, so they cannot be lost and the port stays clean between charges.
Q: Is the camera module protected?
A: The camera lip is raised above the lens plane so the glass does not contact a flat surface when the phone is set down.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.