Description
There is a reason the hand crank survived the electric motor. A grinder that clamps to a counter and turns by arm gives you control over texture, and texture is most of what separates good sausage from a packet of paste. It also gives you a machine with no motor to burn out, no gearbox grease to leak into the food path, and no requirement for a socket near the bench where you are working.
This one is built from 304 stainless steel through the body, the auger and the plate, which is the food contact grade rather than the cheaper 201 alloy that rusts at the seams within a season. The feed inlet measures 8.3 cm across, the outlet 8 cm, and the clamp opens to 4.5 cm, which covers countertops and the thicker butcher block edges that defeat lighter clamps. The crank handle is 17.5 cm long, a length that gives you real torque without making the throw so wide that the machine walks across the counter. Total weight lands at 2.7 kg, heavy enough to stay planted and light enough to lift down from a shelf with one hand.
The working rhythm matters as much as the specification. Cold meat grinds cleanly and warm meat smears, so the practical routine is to chill the cubes, fit the 8 mm plate that ships installed, and feed in strips rather than chunks. An 8 mm plate gives a coarse grind suited to sausage, chili and ragu; swap plates for a finer texture if you are making pate or forcemeat. The whole assembly breaks down without tools for washing, and because nothing in the food path is plated or painted, there is no coating to chip into the mix after a few hundred kilos of throughput.
The arm does the work. The steel and the cold do the rest.
What Sets It Apart
-
304 stainless steel food path
Body, auger and plate in food grade stainless, so the parts that touch meat do not rust, flake or leave a metallic taste. -
8.3 cm feed inlet
Wide enough for strips of pork shoulder and beef chuck, which means less trimming before grinding and faster batches. -
Clamp opening to 4.5 cm
Grips standard counters and thicker butcher block edges without the flex that lets a lighter grinder spin loose mid-crank. -
17.5 cm crank handle
Long enough for real mechanical advantage on cold meat, short enough that the machine does not torque itself off the bench. -
8 mm plate fitted as standard
A coarse grind that suits sausage, chili and ragu out of the box, with the option to change plates for finer forcemeat. -
2.7 kg cast weight
Stays put while you crank, then lifts off the shelf with one hand when the job is done.
Technical Specifications
- Material304 stainless steel
- Product dimensions8 x 19 x 28.5 cm (3.1 x 7.5 x 11.2 in)
- Feed inlet diameter8.3 cm (3.3 in)
- Feed outlet diameter8 cm (3.1 in)
- Clamp opening range0 to 4.5 cm (0 to 1.8 in)
- Handle length17.5 cm (6.9 in)
- Product weight2.7 kg (6 lb)
- Grinding plate fitted8 mm
- Drive typeManual hand crank
- AssemblyTool-free breakdown for cleaning
Where It Belongs
Home cooks who buy half a pig at a time get the most from it, because the grinder turns a chest freezer and a butcher into a supply chain. Hunters use it at the bench where there is no power and no patience for a motor that clogs on sinew. Small producers making sausage, kofta or pet food run it as a second unit that never needs a repair call. And anyone who has priced a kilogram of supermarket mince against a whole cut knows the arithmetic: the machine pays for itself in a handful of batches, then keeps working for the next twenty years.
Questions Buyers Ask Before Ordering
Q: Is the whole grinder stainless steel or just the outside?
The food contact components, including the body, auger and grinding plate, are 304 stainless steel. That is the grade used for food equipment rather than the cheaper alloys that pit and rust at welded seams.
Q: Will it clamp onto a thick butcher block counter?
The clamp opens from 0 to 4.5 cm, which covers standard laminate counters and most butcher block edges. Measure your counter thickness at the point where you plan to mount it before ordering.
Q: What grind does the installed plate give?
The 8 mm plate fitted as standard produces a coarse grind suited to sausage, chili, ragu and burger blends. Finer plates can be fitted for pate and forcemeat.
Q: How do I clean it?
The unit breaks down without tools. Separate the plate, auger and body, rinse in warm water with a mild detergent, dry fully, and leave it apart to air before reassembly so no moisture sits in the threads.
Q: Is it fast enough for a large batch?
A hand crank sets the pace, and a coarse plate moves meat quickly once the cubes are chilled. Expect a steady working rhythm rather than motor speed, with the benefit that nothing overheats and smears.
Q: Does the meat need to be cold?
Cold meat grinds cleanly and holds its texture. Chill cubes to just above freezing before feeding them in, and keep the batch cold between passes for a cleaner cut and better bind.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.