Description
Energy Independence Is Not a Luxury. It Is a Prerequisite for the Autonomous Future.
The Grid Defiant is engineered for those who refuse to be tethered — off-grid homesteaders, marine adventurers, and solar warriors who measure their freedom in kilowatt-hours. At its core sits a prismatic LiFePO4 cell array rated for 6,000+ deep cycles, paired with a 200A Bluetooth Battery Management System that monitors every electron in real time. This is not a commodity battery built to a price point. It is a power architecture designed for a decade of uninterrupted service.
Where lead-acid banks sag under load and degrade with each cycle, the lithium iron phosphate chemistry here maintains a flat discharge curve from 100% to 10% state of charge. The built-in low-temperature charging protection, cell balancing, and surge handling mean you connect it to your inverter and forget it exists. Ten years from now, when a lead-acid equivalent would be on its third replacement, The Grid Defiant will still be delivering 80% of its nameplate capacity. That is not a specification — it is a philosophy of ownership.
The Grid Defiant does not ask permission. It delivers power on your terms, for as long as you need it.
Key Features
- ✦ 6,000+ Deep Cycles at 80% DOD — A decade of daily cycling without capacity anxiety
- ✦ 200A Smart Bluetooth BMS — Monitor voltage, current, temperature, and SOC from your phone
- ✦ Prismatic LiFePO4 Cells — Superior thermal stability vs. cylindrical 18650 packs; no thermal runaway risk
- ✦ Low-Temperature Charging Protection — Automatic cutoff below 0°C prevents lithium plating damage
- ✦ Active Cell Balancing — Maintains ±20mV across all cells for maximum lifespan
- ✦ Surge Capacity: 400A (5s) — Starts induction motors and compressor loads without brownout
- ✦ Parallel-Ready: Up to 4P Configuration — Scale your bank to 400Ah at 48V for whole-home backup
Technical Specifications
- Nominal Voltage: 48V (51.2V nominal)
- Rated Capacity: 100Ah / 5.12kWh
- Cell Chemistry: LiFePO4 (Lithium Iron Phosphate) — Prismatic
- BMS Rating: 200A Continuous / 400A Peak (5 seconds)
- Cycle Life: 6,000+ cycles at 80% DOD (to 80% residual capacity)
- Max Parallel: 4 units (16S4P) — 400Ah / 20.48kWh
- Charge Voltage: 54.75V ±0.2V (CC/CV)
- Discharge Cut-Off: 40.0V (2.5V per cell)
- Operating Temperature: Charge 0–45°C / Discharge -20–60°C
- Weight & Dimensions: Approx. 45kg / 520×268×220mm
Application Scenarios
The Grid Defiant serves as the energy backbone across a spectrum of power-critical deployments. Off-grid solar installations pair it with MPPT charge controllers and 5kW+ inverters for 24/7 autonomous homes. Marine vessels use it to replace lead-acid house banks — cutting weight by 60% while tripling usable capacity. RV and overland rigs run air conditioning, induction cooktops, and Starlink through the night without generator dependency. Telecom base stations in remote locations deploy these in parallel stacks for UPS-grade reliability. And for urban dwellers with unreliable grids, a single unit paired with a hybrid inverter provides 5kWh of load-shedding protection — lights, fridge, internet, and laptops for 8+ hours.
Frequently Asked Questions
Q: Can this battery be mounted in any orientation?
A: Yes. Unlike flooded lead-acid batteries, LiFePO4 prismatic cells are sealed and electrolyte is immobilized. The battery can be mounted vertically, horizontally, or on its side without risk of leakage or performance degradation. This flexibility is critical for marine installations with constrained battery compartments.
Q: What inverter brands are compatible?
A: The Grid Defiant works with any 48V inverter that supports user-configurable voltage parameters — Victron MultiPlus/Quattro, Growatt SPF, MPP Solar, Deye/Sunsynk, EG4, and Schneider XW Pro are all confirmed compatible. For inverters that lack a LiFePO4 preset, set bulk/absorption to 54.6V (±0.2V) and float to 54.0V. The Bluetooth BMS app provides real-time confirmation that charging parameters are within safe limits.
Q: How does the 10-year lifespan compare to lead-acid?
A: A typical lead-acid deep-cycle bank (e.g., Trojan T-105) lasts 1,200-1,500 cycles at 50% DOD — roughly 3-4 years in daily cycling. The Grid Defiant delivers 6,000+ cycles at 80% DOD, translating to 16+ years of daily cycling. Even at a conservative 10-year rating, the cost per usable kWh is approximately one-third of lead-acid when accounting for replacement costs and the fact that LiFePO4 delivers its full rated capacity (lead-acid should not be discharged below 50%).
Q: Is the Bluetooth BMS app available for both iOS and Android?
A: Yes. The companion app (search for the manufacturer BMS app on the App Store or Google Play) connects via Bluetooth 4.0 within a ~10-meter range. It displays individual cell voltages, pack SOC, charge/discharge current, temperature, cycle count, and protection events. You can also configure custom voltage thresholds for charge/discharge cutoffs directly from the app.
Q: Can I mix this battery with older batteries in the same bank?
A: We strongly recommend against mixing batteries of different age, chemistry, or capacity in parallel. The BMS on each unit manages its own cells, but imbalanced internal resistance between old and new batteries causes unequal current sharing — the newer battery shoulders more of the load, degrading faster. For expansion, add identical units within the first 6 months of commissioning, or build a separate bank on a transfer switch.
Q: What happens when the BMS detects a fault condition?
A: The 200A BMS provides multi-layer protection: over-voltage (cell >3.65V), under-voltage (cell <2.5V), over-current (sustained >200A), short-circuit (instantaneous), and temperature extremes (charge blocked below 0°C or above 45°C). In a fault condition, the BMS disconnects the affected circuit via MOSFET switching — typically within microseconds for short circuits and milliseconds for over-current. Recovery is automatic once the condition clears, with no manual reset required for most protections.
Q: Does this battery include a built-in heater for cold-weather charging?
A: This model does not include an integrated heating pad. In environments where charging below 0°C is required, we recommend either housing the battery in an insulated enclosure with a small thermostatically-controlled heating element (12V/24V silicone heating pads are widely available), or selecting a heated-battery variant. The BMS provides low-temperature charge protection as a safety measure, blocking charge current below 0°C — but it is the installer's responsibility to ensure the battery environment is within the specified charging temperature range.
Customer Reviews
Оплата и безопасность
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.