Description
A laser does not cut material. It removes heat tolerance, one millimetre at a time, and what is left behind is the part. That is why two machines with the same wattage figure can produce completely different work: the number on the box describes the source, while the result depends on focus, air assist, and how honestly the frame holds its geometry across a 400 millimetre span.
The TTS-55 PRO and TTS-10 PRO share that frame philosophy. The gantry runs on linear rail rather than unsupported rod, so a cut at the far corner lands where the file says it should, not two tenths of a millimetre inward from belt sag. The head carries a fixed-focus lens with a visible focal shim, which removes the most common beginner error: running a perfectly good diode at the wrong height and blaming the wattage.
Forty watts opens plywood, MDF, leather, slate and anodised aluminium marking. Eighty watts buys speed on the same materials and a genuine ability to cut thicker stock in a single pass. Both configurations ship with the Y-axis rotary roller, which is the attachment that turns a flatbed machine into something that can engrave a tumbler, a rolling pin, or a length of dowel without a jig built from scrap.
Enclosure, extraction and eye protection are not accessories to this class of machine. They are the price of using it indoors. Run the laser under an interlocked lid with airflow across the work, and the difference between a tool and a hazard stays where it belongs.
The beam is honest. Everything around it has to be too.
What Makes It Different
- ✦40W and 80W diode configurations on the same proven TTS frame architecture.
- ✦Linear-rail gantry that holds alignment across the full working area instead of sagging at the edges.
- ✦Fixed-focus head with a focal shim, eliminating the most common cause of weak cuts.
- ✦Y-axis rotary roller included for tumblers, dowels and cylindrical work.
- ✦Air-assist ready, with the nozzle positioned to clear smoke from the cut rather than across it.
- ✦Works with standard GRBL-based software for files you already trust.
- ✦Serviceable modules, so a tired diode is a replacement part rather than a new machine.
Technical Specifications
- SourceDiode laser module, 40W or 80W optical output options
- ModelsTTS-55 PRO (400 x 400 mm class), TTS-10 PRO (larger bed)
- FrameAluminium profile with linear rail on both axes
- FocusFixed lens with focal-height shim
- RotaryY-axis roller included for cylindrical work
- CoolingForced-air diode cooling with air-assist port
- MaterialsPlywood, MDF, balsa, leather, felt, slate, anodised aluminium marking
- ControlGRBL-compatible, USB connection
- SoftwareLaserGRBL, LightBurn and equivalent GRBL senders
- SafetyInterlock-ready wiring, glasses required in use
Where It Earns Its Place
The realistic buyer is a small workshop that has been outsourcing plaques, jigs and personalised gifts and has decided the margin belongs in-house. A sign shop uses the 40W for leather patches and slate coasters, where speed matters less than a clean edge. A furniture maker uses the 80W to cut templates from 6 mm ply in one pass, because two passes never line up as well as one. A hobbyist with a tumbler and a market stall uses the rotary roller more than the bed. All three care about the same thing: whether the tenth piece looks like the first, and whether the machine is still square after a hundred jobs.
The EastSupplier Promise
Sourced directly from vetted manufacturing partners, inspected before dispatch, and priced without distributor layers. If the item arrives outside specification, we replace it or refund it. Every listing on this store is curated by a human buyer, not bulk-imported and abandoned.
Questions Buyers Actually Ask
Q: Can it cut metal?
It marks anodised aluminium and coated stainless. It does not cut bare steel or aluminium plate, and any listing that claims otherwise is describing a fibre laser.
Q: Do I need an enclosure?
If the machine is indoors, yes. Diode lasers scatter blue light and produce smoke that settles on every surface in the room. An interlocked enclosure with extraction is cheaper than a doctor's appointment.
Q: 40W or 80W?
Buy the 80W if you cut 5 to 6 mm plywood regularly or want single-pass work. Buy the 40W if your jobs are engraving, marking and thin stock, where the extra power mostly buys speed you will not use.
Q: How thick can it cut?
Expect roughly 5 mm plywood cleanly on the 40W with air assist, and 8 to 10 mm on the 80W with multiple passes. Thickness claims beyond that assume soft wood and forgiving expectations.
Q: Is the rotary roller worth it?
If you sell tumblers, cups or round stock, it is the difference between a product line and a pile of failed test pieces. If you only cut flat sheet, leave it in the box.
Q: What maintenance does it need?
Clean the lens weekly, check belt tension monthly, and keep the rail free of char. A diode that looks cloudy is a diode that is losing power.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.