Description
The Last Two Millimetres Are the Only Ones Anyone Sees. A blade, a bracket or a welded frame is judged at the edge, not in the middle. That is where a grinder either gives you control or takes it away: a machine that runs at one fixed speed will burn a tempered edge before you have finished the pass, or leave a hollow you cannot dress out. The craftsmen who produce work that looks effortless are not holding the steel more steadily than everyone else. They are running a machine that lets them trade speed for precision at exactly the moment precision is required.
This is a 72 x 2 inch belt grinder built around a 1500W pure copper motor turning at 2900rpm, and the part that matters is how that speed is delivered. A VFD variable frequency drive gives stepless regulation with a belt line speed of 32 metres per minute, so the transition from hogging off material to finishing a bevel is a dial movement rather than a belt change. Three grinding modes are supported, circular, arc and flat, which covers contact-wheel work, slack-belt blending and platen grinding from the same chassis. The frame is all-steel because the load cases on a belt grinder are side loads, and a machine that flexes under pressure will produce a bevel that changes angle along its length.
Three belts are supplied at 100, 180 and 240 grit, which is the standard progression from coarse shaping through blending to a finish that is ready for a surface prep or polish. Belt changing and tensioning is a routine operation rather than a rebuild, and because the machine accepts the 72 x 2 inch format it takes the most widely available consumables in the knife making and fabrication trade. At 50.25kg and 850mm x 300mm x 470mm the unit is heavy enough to stay put under load without being permanently fixed, and the footprint suits a bench or a dedicated pedestal in a small shop. Metal, wood, acrylic and construction materials are all within scope, and the tool is CE certified.
A grinder does not make a blade. It removes everything that was not a blade.
Key Features
- ✦ 1500W pure copper motor running at 2900rpm for sustained grinding power
- ✦ VFD variable frequency drive with stepless speed regulation, no belt changes to change speed
- ✦ Belt line speed of 32 metres per minute across the full speed range
- ✦ Three grinding modes, circular, arc and flat, from one chassis
- ✦ 72 x 2 inch belt format, the most widely stocked consumable in the trade
- ✦ Three belts included at 100, 180 and 240 grit for a complete coarse-to-fine progression
- ✦ All-steel structure built to resist side loading without flexing the bevel
- ✦ 50.25kg mass keeps the machine planted under pressure while remaining movable
Technical Specifications
- Item model number: JLD10-5
- Rated input power: 1500W
- Motor: Pure copper motor, 2900rpm
- Speed control: VFD variable frequency drive, stepless regulation
- Belt line speed: 32 m/min
- Compatible sanding belt: 72 x 2 inch / 1828.8 x 50.8 mm
- Grinding modes: Circular, arc and flat grinding
- Belts included: 3 belts, 100 grit, 180 grit and 240 grit
- Structure: All-steel construction
- Product dimensions: 33.46 x 11.81 x 18.50 in / 850 x 300 x 470 mm
- Net weight: 110.78 lbs / 50.25 kg
- Materials worked: Metal, wood, acrylic and construction materials
- Certification: CE
Where It Belongs
Blade smiths and knife makers are the first people to reach for a 72 x 2 inch belt grinder, because the format and the variable speed are the two requirements the craft actually imposes. The same machine then covers fabricators deburring cut steel and aluminium, welders dressing a bead before paint, and workshops restoring tools where rust removal and edge re-establishment have to happen without removing good metal underneath. The three-mode capability means one bench station can do contact-wheel work on a tight radius, slack-belt blending on a curved handle, and flat platen work on a chisel or a straight bevel. In a small shop where floor space is the binding constraint, that consolidation is worth more than a higher motor rating would be.
Frequently Asked Questions
Q: Can I vary the speed while the machine is running?
Yes. The VFD variable frequency drive provides stepless regulation, so speed is adjusted continuously rather than selected in fixed steps. That is the whole point of the drive: slowing down for a delicate pass on hardened steel without stopping the machine or changing a belt.
Q: What belt size does it take?
72 x 2 inch belts, which is 1828.8mm by 50.8mm. This is one of the most common industrial belt formats, so consumables are available from many suppliers rather than being tied to a single source.
Q: What grits are included and what comes next?
Three belts ship with the machine at 100, 180 and 240 grit. Those cover shaping, blending and pre-finish work. For a mirror polish, continue above 240 into the finer grits and finish on a buffing wheel with compound.
Q: Is the machine suitable for knife making specifically?
Yes. The 72 x 2 inch belt, the 1500W motor and the stepless VFD control are the three features knife makers ask for first. The circular grinding mode handles plunge and fuller work, and the flat platen mode sets primary bevels.
Q: Does it require a dedicated power supply?
It runs from a standard single-phase supply as delivered and is CE certified. Because it draws 1500W continuously under load, a circuit shared with a high-demand machine such as a welder is worth avoiding.
Q: How heavy is it and does it need to be bolted down?
The net weight is 50.25kg and the footprint is 850mm x 300mm. That mass is usually enough for stability during normal grinding. For heavy stock removal, mounting to a bench or pedestal removes the last of the movement.
The EastSupplier Promise
Every unit is inspected before it leaves the warehouse. If a specification on this page does not match what arrives, we cover the return shipping and replace it. English-language support answers within one business day, and replacement parts for this category are stocked so that a working unit stays working.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.