Description
The bathroom is the last room in the house still designed around a gesture nobody enjoys repeating. Paper is a compromise the fixture industry settled on a century ago and never revisited, and the bidet sprayer is the correction: water at pressure, aimed precisely, in a housing that does not require rewiring the room or replacing the toilet.
The body and hose are SUS 304 stainless, which is the grade that survives permanent humidity without pitting or blooming rust at the joints. The internal valve is ceramic, not a rubber washer that hardens and starts to weep after two seasons. Installation is wall-mounted through standard two-hole tapping, so the unit joins the existing cold supply and does not need a plumber for anything beyond the drill point. Matte black, brushed nickel and brushed gold finishes are available, each applied over the steel rather than painted onto plastic.
Operation is a single lever, hold-to-spray, released to stop. That matters more than it sounds: a positive shut-off means no drip between uses and no pressure sitting in the hose. The spray pattern is horizontal and adjustable at the head, which is what makes the unit useful for cleaning the fixture itself, rinsing cloth nappies, washing mud off small feet, or filling a bucket without carrying it across the room.
The best fixture is the one you stop noticing, because it simply does what the room needed all along.
What Makes It Different
- ✦SUS 304 stainless steel body and hose, rated for permanent bathroom humidity.
- ✦Ceramic disc valve instead of a rubber washer that hardens and drips.
- ✦Wall-mounted installation on standard two-hole tapping, cold supply only.
- ✦Hold-to-spray lever with positive shut-off and no residual line pressure.
- ✦Adjustable horizontal spray head that also serves for rinsing and filling.
- ✦Three finishes: matte black, brushed nickel, brushed gold.
- ✦Single cold water feed, so no additional plumbing circuit is required.
Technical Specifications
- Body materialSUS 304 stainless steel
- Hose materialSUS 304 braided stainless
- ValveCeramic disc, single lever
- InstallationWall mounted, 2 tap holes
- Water supplyCold only
- Spray typeHorizontal, adjustable head
- Finish optionsMatte black / brushed nickel / brushed gold
- CertificationCE
- ModelRZ4069 style single-lever bidet set
- Warranty1 year against manufacturing defect
Where It Earns Its Place
It suits any bathroom where the toilet sits near a cold supply and nobody wants to install a full bidet fixture. Households with young children use it for rinsing after accidents and for washing muddy shoes at the source instead of in the bath. People managing mobility limitations find a hand-held spray considerably easier than reaching, and households that have already switched away from paper use it as the primary fixture rather than an extra. It is also the practical answer in rentals, because it comes off the wall as cleanly as it went on.
The EastSupplier Promise
Sourced directly from vetted manufacturing partners, inspected before dispatch, and priced without distributor layers. If the item arrives outside specification, we replace it or refund it. Every listing on this store is curated by a human buyer, not bulk-imported and abandoned.
Questions Buyers Actually Ask
Q: Does it need hot water?
No. The unit is cold-feed only and connects to the existing supply. That keeps installation to a single tapping point and avoids the risk of a scald from a mixed feed.
Q: Will it fit my toilet?
It mounts to the wall, not the toilet, so fit depends on whether there is wall space and a cold feed within hose reach. Standard two-hole tapping is required.
Q: Is the finish painted on?
No. Matte black, brushed nickel and brushed gold are applied over stainless steel, which is why the body does not corrode underneath the coating.
Q: Does it drip when closed?
The ceramic disc valve shuts positively. That is the specific failure mode the design avoids, since a hardened rubber washer is what makes cheap sprayers weep.
Q: Can I use it to fill a bucket?
Yes. The head is adjustable and the hose reaches, so it doubles as a utility tap for cleaning and filling.
Q: Is installation difficult?
It is a two-hole wall mount into the cold line. A competent DIY installation is straightforward; if the wall is tile over concrete, a plumber will make a cleaner job of the drill point.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.