Description
The hardest part of owning a boat is not the water. It is the forty feet between the ramp and the shed, on a slope, alone, with a hull that weighs more than the person moving it. The Quay Hand exists for that forty feet. It is a carbon steel dolly rated to 420 lb, built to take the tongue weight of a loaded trailer and turn a two-person job into a one-person walk.
The engineering is deliberate rather than decorative. The rod extends across three settings at 87.8, 98 and 108.2 inches so the same dolly reaches the coupler on a kayak trailer and on a motorboat trailer without a second frame. Two 15.7-inch pneumatic tires carry the load over grass, sand and cement, where a solid wheel would dig in and stall. The carbon steel body is galvanized and powder coated, a two-layer finish that survives salt air and ramp spray rather than rusting through the first season.
What separates a working dolly from a failed one is where the weight sits. The bracket holds the coupler at a height that keeps the trailer tongue level, so the load stays balanced across the axle and the dolly does not try to nose over on a ramp incline. The handle geometry puts the grip at hip height, which is the difference between steering a boat and wrestling one. Assembly is a wrench job, not a fabrication job, and the unit breaks down for storage in a garage corner.
The water is the destination. Everything before it should be quiet mechanical work.
Key Features
- ✦ 420 lb / 190 kg load capacity, sized for loaded boat, kayak and canoe trailers
- ✦ Three-position adjustable rod at 87.8, 98 and 108.2 inches to fit different coupler heights
- ✦ Two 15.7-inch pneumatic tires that roll over grass, sand, gravel and concrete
- ✦ Galvanized and powder-coated carbon steel for salt-air and ramp-spray conditions
- ✦ Balanced bracket geometry that keeps the trailer tongue level on an incline
- ✦ Hip-height handle position for controlled steering rather than lifting
- ✦ Breaks down for flat storage when the season ends
Technical Specifications
- ModelCY420-B
- Load capacity420 lb / 190 kg
- MaterialCarbon steel, galvanized plus powder coat
- Tires15.7 in pneumatic, two-wheel
- Rod lengths87.8 in / 98 in / 108.2 in
- ApplicationBoats, kayaks, canoes, jet skis, small utility trailers
- SurfaceGrass, sand, gravel, cement, asphalt
- AssemblyBolt-together, tools included
- CertificationCE
- StorageCollapsible frame
Where It Belongs
Boat owners moving hulls between ramp, washdown bay and winter storage; kayak and canoe owners who cannot carry a loaded boat alone; marina yards that need a single dolly to reposition several small craft; and property owners who use it to shift a utility trailer into a tight shed. The pneumatic tires make it the right tool for soft ground where a hand truck sinks, and the adjustable rod means one unit serves a fleet of mixed trailers instead of one dedicated fit.
Questions Buyers Ask
Will it handle a boat trailer with a loaded hull?
The rated capacity is 420 lb of tongue weight. That covers most small motorboats, kayaks, canoes and jet skis; check your loaded tongue weight before use rather than the total boat weight.
What is the difference between tongue weight and boat weight?
The dolly carries the downward load at the coupler, not the whole hull. A 1,200 lb boat on a balanced trailer typically puts 100 to 200 lb on the tongue, which is well inside the 420 lb rating.
Do the pneumatic tires need inflation?
Yes, they are air-filled and arrive inflated. Check pressure at the start of each season and top up to the rating molded on the sidewall.
Will it roll on sand?
The wide pneumatic tires are chosen specifically for soft ground. They roll on packed sand and gravel; loose dry sand will still require effort, as it would with any wheeled load.
How long does assembly take?
Roughly fifteen to twenty minutes with the included hardware. The frame, bracket, axle and handle bolt together and the wheels pin on.
Does the finish survive salt water exposure?
The carbon steel is galvanized before powder coating, which is the correct order for salt environments. Rinse with fresh water after ramp use and it will outlast a single-coat painted frame.
Can one person move a boat with it?
That is what it is for. The hip-height handle and the two-wheel balance let one adult walk a loaded trailer at a controlled pace on flat or gently graded ground.
Does it work with a jet ski trailer?
Yes, provided the coupler height falls within the adjustable rod range and the tongue weight is under the rating.
Can it be stored outdoors?
It can, though a covered spot extends the finish. The unit collapses flat enough for a garage wall or shed shelf.
Is the dolly height adjustable for different trailers?
The rod length adjusts across three positions. If your coupler sits unusually high, a standard coupler adapter brings it into range.
The EastSupplier Promise
Every unit is inspected before it leaves the warehouse and ships from the region closest to you. If a specification on this page does not match what arrives, we replace it. Requests are answered within one business day by people who handle the product, not a script. EastSupplier supplies brands, workshops and retailers across North America, Europe and Australia from a catalog of more than fifty thousand lines.







Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
