{"product_id":"the-hotend-pro-v5-j-head-hotend-kit","title":"The Hotend Pro | V5 J-Head Hotend Kit for Anycubic 4Max Pro 2.0","description":"\u003cdiv class=\"product-narrative\"\u003e\n\u003cp\u003e\u003cstrong\u003eA 3D Printer Fails at the Hot End First. Upgrade the Point That Fails.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAsk anyone who has run an FDM printer for a year where their failed prints came from and the answer is almost always the same throat: a worn nozzle, a clogged heat break, a heat creep problem that shows up as under-extrusion halfway through an eight-hour part. This V5 J-head hotend kit is the direct replacement for the ANYCUBIC 4Max Pro 2.0 assembly, built around a stainless steel nozzle that resists abrasive filament far longer than the brass tip most printers ship with.\u003c\/p\u003e\n\u003cp\u003eThe kit arrives as a complete swap: hot end assembly, sink and silicone sock, so a single session covers the maintenance instead of three separate orders. Stainless steel keeps its bore dimension as it wears, which matters because a nozzle that widens by a few hundredths of a millimetre quietly ruins dimensional accuracy long before it visibly fails. The supplied sock keeps the heater block insulated and the melt zone stable, and the assembly mounts on the stock carriage with no adapter.\u003c\/p\u003e\n\u003cp\u003eFit it once and the printer goes back to being a printer. That is a better use of a weekend than diagnosing stringing for the fourth time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHandle the wear item before it handles your print queue.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin:26px 0;border:0;border-top:1px solid #e8e8e8;\"\u003e\n\u003cdiv class=\"product-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul style=\"list-style:none;padding:0;margin:0;\"\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e✦ Direct replacement hot end for the ANYCUBIC 4Max Pro 2.0 assembly\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e✦ Stainless steel nozzle that resists abrasive and filled filaments\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e✦ V5 J-head geometry with a stable, repeatable melt zone\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e✦ Supplied heat sink for consistent thermal transfer\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e✦ Silicone sock included to insulate the heater block\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e✦ Single-session maintenance instead of sourcing three separate parts\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e✦ Keeps nozzle bore dimension, protecting long-term dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul style=\"list-style:none;padding:0;margin:0;\"\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eItem type:\u003c\/strong\u003e Hot end assembly (V5 J-head)\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e ANYCUBIC 4Max Pro 2.0\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eNozzle material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eSupplied parts:\u003c\/strong\u003e Hot end, heat sink, silicone sock\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eFilament suitability:\u003c\/strong\u003e PLA, PETG, ABS and abrasive filled filaments\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Stock carriage, no adapter required\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eThermal stability:\u003c\/strong\u003e Silicone sock on heater block\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eWear characteristic:\u003c\/strong\u003e Stainless bore resists abrasion and clogging\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eVersion:\u003c\/strong\u003e Updated 2.0 specification\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;\"\u003e\n\u003cstrong\u003eService interval:\u003c\/strong\u003e Replace at the first sign of under-extrusion or stringing drift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-applications\"\u003e\n\u003ch3\u003eWhere It Earns Its Place\u003c\/h3\u003e\n\u003cp\u003eThis is for the operator who prints parts that have to fit. On a functional-print workload it keeps bore diameter honest across long runs where a soft brass nozzle would quietly widen and start producing loose fits. On abrasive filaments it is the difference between a nozzle that lasts a spool and one that lasts a week. And as a spare on the shelf it turns a mid-project failure into a twenty-minute swap instead of a stalled queue.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv style=\"margin-bottom:16px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this a complete hot end or just a nozzle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: It is the full assembly: hot end, heat sink and silicone sock. The stainless steel nozzle is the wear part at the centre of the kit, but you receive the parts needed for the whole swap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:16px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why choose stainless steel over brass?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Brass is softer and cheaper, so the bore widens as you print, especially with filled or glow filaments. Stainless steel holds its dimension much longer, which protects the accuracy of parts that have to fit together.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:16px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does it fit any 3D printer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: It is built as a direct replacement for the ANYCUBIC 4Max Pro 2.0. Other hot end mounts vary in thread and length, so treat it as model-specific rather than universal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:16px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What does the silicone sock do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: It insulates the heater block, keeping the melt zone stable and preventing filament from baking onto the block. That stability is what stops heat creep and the stringing that follows it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:16px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will I need to change my slicer settings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Only the usual tuning after any hot end change: a first-layer and extrusion calibration, then retraction tuned to the new assembly. Your temperatures and flows carry over as a starting point.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:16px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should the hot end be replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Replace it when you see consistent under-extrusion, stubborn clogs or stringing that no amount of tuning corrects. On a busy machine that is typically measured in months, not years.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-gallery\" style=\"margin-top:32px;text-align:center;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S241dea447a6745cd89019242dc352fd1K.webp?v=1742692570\" alt=\"The Hotend Pro | V5 J-Head Hotend Kit for Anycubic 4Max Pro 2.0\" style=\"max-width:100%;height:auto;margin:8px 0;border-radius:6px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S9ca766d8f4b14be98830537e32a81cbbz.webp?v=1742692570\" alt=\"The Hotend Pro | V5 J-Head Hotend Kit for Anycubic 4Max Pro 2.0\" style=\"max-width:100%;height:auto;margin:8px 0;border-radius:6px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/Sf72346efb91543f598a6fbbc4607e8420.webp?v=1742692570\" alt=\"The Hotend Pro | V5 J-Head Hotend Kit for Anycubic 4Max Pro 2.0\" style=\"max-width:100%;height:auto;margin:8px 0;border-radius:6px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S8ec203251e054fe3b0946f44faaf82dbU.webp?v=1742692570\" alt=\"The Hotend Pro | V5 J-Head Hotend Kit for Anycubic 4Max Pro 2.0\" style=\"max-width:100%;height:auto;margin:8px 0;border-radius:6px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/edc71b0c51adf183240a4911a48b8b81.jpg?v=1791972235\" alt=\"The Hotend Pro | V5 J-Head Hotend Kit for Anycubic 4Max Pro 2.0\" style=\"max-width:100%;height:auto;margin:8px 0;border-radius:6px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/56d68e4e6ffdc8a29dccd14e0ab011c6.jpg?v=1791972237\" alt=\"The Hotend Pro | V5 J-Head Hotend Kit for Anycubic 4Max Pro 2.0\" style=\"max-width:100%;height:auto;margin:8px 0;border-radius:6px;\"\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"Product\", \"name\": \"The Hotend Pro | V5 J-Head Hotend Kit for Anycubic 4Max Pro 2.0\", \"image\": [\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S241dea447a6745cd89019242dc352fd1K.webp?v=1742692570\", \"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S9ca766d8f4b14be98830537e32a81cbbz.webp?v=1742692570\", \"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/Sf72346efb91543f598a6fbbc4607e8420.webp?v=1742692570\", \"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S8ec203251e054fe3b0946f44faaf82dbU.webp?v=1742692570\", \"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/edc71b0c51adf183240a4911a48b8b81.jpg?v=1791972235\", \"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/56d68e4e6ffdc8a29dccd14e0ab011c6.jpg?v=1791972237\"], \"description\": \"A 3D Printer Fails at the Hot End First. Upgrade the Point That Fails.   Ask anyone who has run an FDM printer for a year where their failed prints came from and the answer is almost always the same throat: a worn nozzle, a clogged heat break, a heat creep problem that shows up as under-extrusion halfway through an eig\", \"sku\": \"9019390656735\", \"brand\": {\"@type\": \"Brand\", \"name\": \"EastSupplier\"}, \"offers\": {\"@type\": \"Offer\", \"url\": \"https:\/\/eastsupplier.com\/products\/the-hotend-pro-v5-j-head-hotend-kit\", \"priceCurrency\": \"USD\", \"price\": \"30.56\", \"availability\": \"https:\/\/schema.org\/InStock\", \"itemCondition\": \"https:\/\/schema.org\/NewCondition\"}, \"aggregateRating\": {\"@type\": \"AggregateRating\", \"ratingValue\": \"4.7\", \"reviewCount\": \"5\", \"bestRating\": \"5\", \"worstRating\": \"1\"}}\u003c\/script\u003e","brand":"East Supplier Platform","offers":[{"title":"With Sink and sock \/ 4max pro 2.0","offer_id":46854832914655,"sku":"1005002695121415-With Sink and sock-4max pro 2.0","price":30.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S9ca766d8f4b14be98830537e32a81cbbz.webp?v=1742692570","url":"https:\/\/eastsupplier.com\/pt-kr\/products\/the-hotend-pro-v5-j-head-hotend-kit","provider":"EastSupplier Platform","version":"1.0","type":"link"}