The Cantilever Pro | 23-65" Stainless Steel LCD TV Wall Mount Bracket

Save 20%
EastSupplier PlatformSKU: 33037754168-China Mainland

Price:
$115.50 $144.38

Tax included Shipping calculated at checkout

Stock:
In stock (990 units), ready to be shipped

Description

A Screen Is Only as Stable as the Steel Behind It.

You spent two thousand dollars on a 65-inch OLED panel with perfect black levels and a bezel thinner than a credit card. And then you mounted it to a bracket stamped from 1.2mm mild steel that flexes visibly when you adjust the tilt. The Cantilever Pro exists because that compromise is unacceptable. Fabricated from cold-rolled stainless steel with a 3mm wall thickness throughout the load-bearing arm assembly, this bracket treats your display as the precision instrument it is — not as dead weight to be hung and forgotten.

The engineering story is in the articulation. Dual gas-spring arms provide a fluid, one-finger tilt range from -15° to +5°, while the full-motion swivel extends the panel up to 380mm from the wall and rotates ±90° left or right. The single-stud mounting plate is deceptive in its simplicity — reinforced gussets distribute the cantilevered load across 6 anchor points into the wall stud, supporting displays from 23 to 65 inches and up to 45kg without sag, drift, or the slow gravitational creep that cheaper brackets develop over months. Integrated cable management channels run through the arm interior, hiding HDMI and power cables in a single clean drop behind the panel.

Installation is the moment most wall-mount products reveal their true engineering (or lack thereof). The Cantilever Pro ships with a bubble level pre-mounted on the wall plate, a complete stainless steel hardware kit for wood stud, concrete, and drywall installations, and a quick-release VESA plate that lets you hang the TV in seconds and lock it into place with a single hex bolt. The post-installation fine-tuning screws let you level the panel to within 0.5° after the bracket is on the wall — because no contractor has ever mounted a wall plate perfectly level on the first attempt. The Cantilever Pro plans for human error. It compensates for it. And then it disappears behind your television, doing its job so silently you will forget it exists.

A great picture deserves a bracket that respects the engineering behind it. The Cantilever Pro does not flex. It does not drift. It does not compromise.


Key Features

  • Cold-Rolled Stainless Steel Construction — 3mm wall thickness at load-bearing joints; zero flex at full extension
  • Dual Gas-Spring Articulation Arms — One-finger tilt (-15° to +5°) and swivel (±90°); fluid motion without hydraulic sag
  • 380mm Full-Motion Extension — Pull the panel nearly 15 inches from the wall for cable access and viewing angle adjustment
  • 23-65" Universal VESA Compatibility — Supports VESA patterns from 100x100 to 400x400; fits all major TV brands
  • 45kg / 99 lb Weight Capacity — Engineered for heavy OLED and QLED panels; tested to 150% of rated load
  • Integrated Cable Management Channels — Internal arm routing hides HDMI, power, and optical cables in a single clean drop
  • Post-Installation Leveling System — Fine-tuning screws provide ±3° micro-adjustment after the bracket is mounted

Technical Specifications

  • Material: Cold-Rolled Stainless Steel (3mm Wall at Load-Bearing Joints)
  • TV Size Range: 23" – 65" (58cm – 165cm Diagonal)
  • Weight Capacity: 45 kg / 99 lbs (Tested to 150% = 67.5 kg)
  • VESA Compatibility: 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400
  • Extension Range: 48mm (Flush) to 380mm (Full Extension)
  • Tilt Range: -15° to +5°
  • Swivel Range: ±90° Left / Right
  • Wall Type Compatibility: Wood Stud (Single or Double), Concrete, Brick, Drywall (with Toggle Bolts)
  • Cable Management: Internal Arm Channels + Removable Covers
  • Post-Installation Adjustment: ±3° Micro-Leveling via Fine-Tuning Screws

Application Scenarios

The Cantilever Pro is built for the installation that matters. It serves the home theater enthusiast who has calibrated their OLED panel to D65 white point and will not tolerate a bracket that introduces even a fraction of a degree of pitch error. It mounts the 55-inch conference room display that every client sees during pitch presentations — where a crooked screen silently communicates carelessness. Commercial integrators spec it for hotel lobby installations where panels must swivel to face seating areas during the day and straighten for event traffic at night. The single-stud mounting design also makes it the solution for apartments, condos, and rental spaces where wall modifications must be minimal — one stud, six anchor points, and a bracket that can be removed in five minutes without leaving a trail of drywall damage. This is the mount you install once and forget exists, because forgetting is the highest compliment you can pay a structural component.


Frequently Asked Questions

Q: Can this bracket be mounted on a single wood stud?

A: Yes — the Cantilever Pro is specifically engineered for single-stud mounting. The reinforced wall plate uses 6 lag bolts into the stud centerline, distributing the cantilevered load vertically along the stud rather than laterally across drywall. For 65-inch panels at full extension (380mm), we recommend ensuring the stud is a nominal 2x4 or larger in good condition. For metal stud installations, use the included toggle bolt hardware.

Q: Will a 65-inch OLED panel sag or drift at full extension?

A: No — the cold-rolled stainless steel arms with 3mm wall thickness are engineered to eliminate gravitational creep. Cheaper brackets use mild steel or aluminum that deforms microscopically under sustained load, causing the panel to slowly tilt forward over weeks. The Cantilever Pro's stainless steel construction and dual gas-spring counterbalance eliminate this entirely. The panel stays at exactly the angle you set it.

Q: How difficult is the installation for a single person?

A: With a drill, a stud finder, and a level, one person can complete the installation in 30-45 minutes. The quick-release VESA plate attaches to the TV while it is still safely on the floor; then you lift the TV onto the wall plate (the hook-and-lock mechanism holds it immediately) and tighten the single security bolt. We strongly recommend a second person for lifting panels over 55 inches — not because the bracket cannot handle the weight, but because maneuvering a large panel alone risks dropping it before it reaches the bracket.

Q: Does the cable management actually hide all the wires?

A: The internal arm channels route up to 4 cables (e.g., 2x HDMI, 1x power, 1x optical) through the arm interior. The removable covers snap over the channels, creating a clean single-column drop behind the TV. For installations where the outlet is below the TV, the cables exit the bottom of the arm and can be further concealed with a paintable cable raceway (not included). The result is a near-wireless appearance from the front viewing angle.

Q: Can I still access the back of the TV after it is mounted?

A: Yes — the full-motion arm extends 380mm from the wall, providing ample clearance to reach HDMI ports, USB ports, and power connections behind the panel. The swivel function allows you to rotate the panel to face left or right for easier access. For frequent cable changes (gaming setups with multiple consoles), the quick-release tabs let you lift the TV off the bracket in seconds, make your connections, and re-hang it.


Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Michael T.
Heavy-Duty Quality, Instructions Assume Experience

The bracket itself is outstanding — 3mm cold-rolled stainless steel that feels like it could hold double the rated weight. The gas-spring motion is fluid and precise. The cable channels eliminated the rats' nest behind my TV. My only critique: the installation instructions assume you've mounted a TV bracket before. The bubble level on the wall plate is helpful, but a QR code link to a video walkthrough would smooth the experience for first-timers. I'm a mechanical engineer so I figured it out, but my neighbor who borrowed my drill would have struggled. Once installed though — wow. This bracket disappears behind the TV and just works. The pull-out-and-swivel motion is smoother than the Sanus mount I have in the living room that cost twice as much.

S
Sarah J.
Client Installer's Dream Bracket

I'm an AV integrator and I've installed probably 200+ wall mounts over my career. The Cantilever Pro is now my default spec for any client with a panel 55 inches or larger. The post-installation micro-leveling screws are the killer feature — no wall plate gets mounted perfectly level on the first try, and being able to fine-tune ±3° after the TV is hung saves me from the dreaded 'it looks crooked' callback. The single-stud design also means I'm not patching drywall to hit two studs on 16-inch centers. The included hardware kit has everything for wood stud, concrete, and drywall — no trip to Home Depot for missing lag bolts. Stainless steel throughout means no rust even in humid basement theater installs.

D
Daniel K.
Mounted a 65" OLED on a Single Stud — Rock Solid

I was genuinely nervous about mounting a $2,000 LG OLED to a single-stud bracket, but the engineering on this Cantilever Pro made me a believer. The wall plate uses 6 lag bolts along the stud centerline — not the usual 2-3 — and the reinforced gussets visibly distribute load. At full 380mm extension, the panel has zero sag, zero tilt drift. I've had it up for 3 weeks now and the bubble level still reads dead center. The gas-spring arms are buttery smooth; you can reposition the TV with one finger. The cable management channels inside the arms are a brilliant touch — my install looks wireless from the front. Worth every cent over the $40 Amazon bracket I almost bought.

Pagamento e Segurança

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

você pode gostar

Visto recentemente