The Cyclone | 200W 160K RPM Brushless Electric Air Duster

20%セーブ
EastSupplier PlatformSKU: 1005008908977438-F16 Black-China Mainland

Color: F16 Black
価格:
$80.50 $100.62

税込み 送料計算済み チェックアウト時

在庫:
残り7個

説明

Compressed Air Is a Subscription You Never Signed Up For. Every can of duster gas you buy is a tax on precision — a recurring cost, a finite resource, and an environmental compromise. The X6 Electric Air Duster ends that cycle. This is not a can of pressurized chemicals. It is a 160,000 RPM turbine packed into a handheld chassis, and it answers the question: what if cleaning your electronics felt like wielding a miniature jet engine?

The brushless motor at the heart of the X6 spins at speeds normally reserved for dental drills and turbochargers. At 200W peak output, it generates a focused column of air that displaces dust from keyboard switches, GPU heatsinks, camera sensors, and workshop surfaces that have never been truly clean. USB rechargeable — the same cable that powers your phone fuels this tool. No cans to replace. No propellant residue on your optics. Just air, accelerated to the edge of what a handheld device can produce.

CE-certified. Battery-included. Built for the technician who understands that the first step of any repair — whether it is a $4,000 lens assembly or a $400 mechanical keyboard — is removing the particulate that slow degradation leaves behind.

Dust is entropy made visible. The X6 is order, restored at 160,000 revolutions per minute.

Key Features

  • 160,000 RPM Brushless Motor: Turbine-grade air velocity — clears PCB dust, thermal paste residue, and optical sensor debris
  • 200W Peak Power: Sustained airflow that does not fade as battery drains — unlike brushed-motor competitors
  • USB-C Rechargeable: Built-in lithium battery; charges from any USB-C power source — laptop, power bank, wall adapter
  • Zero Consumables: No compressed air cans, no propellant chemicals, no recurring cost — indefinite reuse
  • Multi-Surface Safe: Precision nozzle attachments for tight spaces (keyboard switches, GPU fins, camera mounts)
  • Ergonomic Grip: Balanced weight distribution; one-handed operation for extended cleaning sessions
  • CE Certified: International safety compliance — over-discharge protection, temperature monitoring, short-circuit cutoff

Technical Specifications

  • Model: X6
  • Motor Type: Brushless DC
  • Maximum Speed: 160,000 RPM
  • Peak Power: 200W
  • Power Source: USB-C rechargeable (built-in lithium battery)
  • Airflow Modes: Variable speed (Low / Medium / High)
  • Nozzle Attachments: Precision concentrator, wide-dispersion, brush
  • Battery Runtime: 20–60 min (mode-dependent)
  • Charge Time: 2–3 hours (USB-C 5V/2A)
  • Housing Material: ABS + TPE grip
  • Certification: CE
  • Weight: ~350g

Application Scenarios

The X6 is purpose-built for the technician who values their equipment. PC builders use it to clear GPU heatsinks, motherboard VRMs, and fan blades before every system refresh. Photographers run it across DSLR sensors and lens mounts between shoots. Mechanical keyboard enthusiasts chase the impossible — a switch housing with zero dust — and the X6 gets closer than anything short of a cleanroom. Workshop mechanics deploy it on benchtop tools after every job. Office workers reclaim their keyboard hygiene without the recurring cost of canned air. The X6 earns its place wherever precision equipment and airborne particulate intersect.

Frequently Asked Questions

Q: How does this compare to canned compressed air?

A: A single can of compressed air delivers 4–8 minutes of usable pressure, then becomes landfill. The X6 delivers unlimited cleaning cycles from one charge. Additionally, canned air releases bitterant chemicals and can spray liquid propellant if tilted — the X6 produces pure ambient air at any angle. For a PC builder or photographer who cleans weekly, the X6 pays for itself within 3–6 months.

Q: Can the X6 handle heavy dust on workshop equipment?

A: At 160,000 RPM, the focused nozzle output is sufficient for sawdust, drywall powder, and metal filings on benchtop tools. However, for caked-on grease or oil-mixed grime, use a brush or solvent first. The X6 is designed for particulate dust removal — it is not a pressure washer.

Q: How long does the battery last per charge?

A: Runtime varies by speed setting: approximately 20–30 minutes on High (160K RPM), 40–50 minutes on Medium, and 60+ minutes on Low. The USB-C recharge from empty to full takes about 2–3 hours depending on the power source.

Q: Is this safe for PC components and sensitive electronics?

A: Yes — the X6 is specifically designed for electronics. There is no static charge buildup (unlike vacuum cleaners), no liquid propellant (unlike canned air), and the airflow is dry ambient air. Use the precision nozzle for GPU fans, motherboard VRMs, and camera sensors. Recommended by system integrators for maintenance cleaning between builds.

Q: What nozzles or accessories are included?

A: The X6 ships with a precision concentrator nozzle for tight spaces, a wide-dispersion nozzle for surface cleaning, and a brush attachment for loosening stubborn dust. All attachments are snap-fit and tool-free swappable.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Alex N.
Powerful but loud at full speed

The 160K RPM mode is impressively powerful — cleared three years of dust from my keyboard in about 30 seconds. The variable speed is useful: Medium for case fans, High for heatsinks. It is loud at full throttle — wear headphones if you are cleaning in an office. Battery life is solid, got through a full ATX build cleanup on one charge.

T
Thomas W.
Workshop essential — ditch the cans

I run a small electronics repair shop and this has replaced six cans of compressed air per month. The precision nozzle gets into phone charging ports, laptop vents, and camera lens mounts. No propellant smell, no cold spray when tilted, no waste. USB-C charging means I top it up at the bench between jobs. Genuinely essential tool.

R
Ryan M.
My PC has never been this clean

Built a custom water-cooled rig last year and dust has been the enemy. Went through four cans of compressed air before buying the X6 — it has already paid for itself. The 160K RPM mode clears GPU radiator fins in seconds. Battery lasts through an entire case teardown and rebuild. The brush attachment is great for fan blades.

Pagamento e Segurança

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

você pode gostar

Visto recentemente