Newly upgraded hotbed printing platform

Size

Square:220x220mm/235x235mm/310x310mm

Round: Diameter 215mm/220mm/270mm/309mm

Instructions

1. For the first printing, it must be leveled (the distance between the nozzle and the hot bed is generally A4 paper thickness).

2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles.

3. Adsorb the PEI side or the PET side spring steel plate on the magnetic base.（PEI/PET have a film ,please tear off the film before use )

4. Start printing, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (do not exceed 80°C).

5. when the temperature drops to room temperature，take off the printing surface and bend it gently to achieve easy demoulding.

Advantage

1. Double-sided printing, It is convenient, durable and practical.

2.High temperature resistance, scratch resistance, no deformation.

3.Suits variety of filaments, especially for PLA.

4. Don’t need touse glue, easy to use.

5.Easy to get the first layer even for a new user.

6. Easy to clean, just wipe it off with a wet tissue or alcohol before printing.

7.The soft magnetic base is not only very magnetic, but also very sticky,which can prevent warping.

8.Spring steel sheetis made of stainless steel, no matter how bent it is, it can return to flat state.

9. You only need to bend the PET-PEI with your hands, and the model can be easily demoulded without using other tools.

Kind Tips

1.There is a protective film on PEI/PET .Please peel the film before using.

2.PEI and PET must be used with magnet base .Please make sure you already have a magnet base before you would like to purchase pet-pei without base.

3.After our extensive testing, we recommend PET to print PLA and TPU and PETG.

PEI print PLA /PETG/PC/ABS /TPU /Nylon etc.