UltraX-30 Closed-Loop Alcohol Extraction System

The UltraX-30 Alcohol Extraction System is our large capacity centrifuge system that uses programmable sequences to target and extract your desired compounds from botanical biomasses. Utilizing closed-loop technology with mechanical centrifugation, the UltraX-30 ensures the easy delivery of high-purity extractions.

Features:

Closed-Loop System
3rd Party Engineer Reviewed
UL Listed US/Canada
304 &316L Sanitary Stainless Steel
Vacuum Jacket Insulation
Easy Material Loading/Unloading
Bi-Directional Agitation
Variable Speed Control
Heavy-Duty Spin Drying
12 Month Parts/Labor Warranty
Technical Support
Designed in USA

Product Overview:

The UltraX-30 is an all-in-one system that combines closed-loop cold alcohol extraction with mechanical centrifugation, ensuring high-quality results with the benefit of a larger capacity. A touchscreen HMI features a program menu with various wash/agitation and spin/ dry cycles, all programmable to the operator’s specifications to effectively target the desired separation. With a run time of only 15-20 minutes with a throughput of up to 600 lbs per 8-hour day, this system ensures high-quality crude oil in a fraction of the time.

Standard Features:
Vessel

(1)Alcohol Feed Port:1.5” Sanitary Triclamp Fittings
(1)1.5”Tri-clamp; Remote Discharge Vent and Pressure Relief Port
2”Tri-Clamp Angled Drain
Liquid/Vapor Tight(No pressure)Vessel with EPDM Lid Seal

Dimensions
UltraX-30:w/o Auxiliary components(49”L×27.5”W×58.5”H)
Main Control Panel:(24”L×32”W×54”H)
Main Frame Weight:890 lbs/404 kg
Controls

Industrial Hazloc control panel
Touchscreen HMI
20ft Tethered control panel(Installed outside of hazloc)
Emergency stop
Variable frequency drive:0-1500 RPM

Electrical
230V,30 amp, Three-Phase
5HP Motor
UL-NEMA L15-30 Plug

Included Ancillary Equipment
(1)30 Gallon Jacketed Stainless Steel Discharge Vessel
Dimensions 30”L×30”W×24”H
Weight×114lbs/52kg

(1)Barrier Fluid Reservoir
Dimensions-39”L×18”W×56”H
Weight×113lbs/51kg

Extraction Cycle:
The UltraX-30 offers 3 program cycles: spray wash, agitation wash and spin dry cycle. Each program cycle has (2) programmable auto recipes and (1)programmable manual recipe. The operator fills filter bag with milled plant material and places it in the system where it is spun at varying speeds while injecting alcohol at controlled rates. The system can also be flooded, and bi-directionally agitated for full target compound removal. After the wash, the plant material undergoes a medium duty spin dry, leaving the spent plant material 97% free of tincture with up to 98% target compound removal. The alcohol wash is then used for another 2-3 runs of material or diverted to a mixing tank for further processing.

1)System Loading

A preloaded filter bag is placed into the basket and the system is sealed to begin the cycle.

2)Wash Cycle

The "Spray Wash" or “Agitation Wash” program is selected on the program menu where the RPM and cycle times are set to the operator’s specifications.

3)Alcohol Fill

Chilled alcohol is pneumatically pumped from source tank into the CUP system via an inlet valve or spray nozzle.

4)Extraction Begins

The plant material undergoes either a spray wash or an agitated wash with a set number of bi-directional agitations aimed at extracting 98% of plant desirables.

5)System Draining

When the wash cycle is complete, the outlet valve is opened and the system is drained. The alcohol wash is pumped to a properly rated storage reservoir for further processing.

6)Spin Dry Cycle

The ”Spin Dry” program is selected on the program menu and the drying cycle is started. The wet plant solids are spun dry of the remaining alcohol mixture within.

7)System Unloading

When the dry cycle is complete,the operator can retrieve the filter bag from the basket.