The Micro Forge | 25-in-1 Precision Screwdriver Set in S2 Alloy Steel

Economisez 20%
EastSupplier PlatformSKU: 1005011946184717-United Kingdom

Prix:
$22.51 $28.14

Frais de port calculés au paiement

Stock:
Plus que 3 en stock

Description

"In an era conditioned toward disposable electronics and planned obsolescence, the quiet discipline of repair is an act of reclaiming sovereignty. When you open a precision device to clean, upgrade, or restore it, you transform from a passive consumer into an active steward of engineering."

At EastSupplier, we believe high-caliber instruments should possess tactile temperature, balanced ergonomics, and unwavering mechanical integrity. The Apex 25-in-1 Precision Magnetic Screwdriver Set was engineered specifically for makers, hardware engineers, and meticulous artisans who refuse to let stripped screws and cheap brittle bits compromise delicate assemblies.

Machined from aerospace-grade aluminum alloy and paired with 24 high-hardness S2 alloy steel bits, this kit balances pocketable portability with industrial-grade resilience. Whether calibrating optical equipment, unfastening micro-torx screws on a flagship smartphone, or servicing high-vibration drone gimbal frames, every component seats with deliberate, zero-wobble magnetic cohesion.

Apex 25-in-1 Precision Screwdriver Set Bits Layout

Tactile Architecture: Ergonomics That Respect the Craftsman

Precision electronics repair requires nuanced torque feedback rather than brute force. The Apex handle features an ergonomic triangular profile with laser-cut anti-slip knurling that sits naturally between the thumb and forefinger. At its apex rests a silk-smooth 360-degree rotating tail cap running on precision bearings, allowing continuous single-handed downward pressure while your fingers deftly drive the thread home.

S2 Industrial Alloy Steel

Heat-treated to HRC 58-62 hardness with manganese phosphate coating to prevent edge chipping, round-off, and surface oxidation over years of active bench service.

Permanent Neodymium Magnetism

Integrated magnetic bit holder seats bits firmly with zero lateral play while energizing the drive tip to effortlessly lift and hold tiny non-magnetic stainless micro-screws.

Snap-Lock Aluminum Enclosure

Slim, pocketable anodized casing with clearly stamped bit geometry profiles, securing every component in its dedicated magnetic bay even when inverted.

Apex Precision Screwdriver Handling and Operation

Comprehensive Technical Specifications

Engineering Parameter Technical Specification
System Configuration 25-in-1 (24 Precision Driver Bits + 1 Ergonomic Alloy Driver Handle)
Bit Metallurgy Hardened S2 Shock-Resistant Alloy Steel & CR-V (Chrome Vanadium)
Rockwell Hardness HRC 58 - 62
Driver Handle Material CNC Machined Aviation Aluminum Alloy with 360° Ball-Bearing Swivel Cap
Phillips Bit Profiles PH000, PH00, PH0, PH1, PH2
Slotted (Flathead) Bits SL1.5, SL2.0, SL3.0, SL4.0
Torx Security Profiles T2, T3, T4, T5, T6, T8, T10, T15
Hexagonal Bits H1.5, H2.0
Specialty Security Bits Pentalobe P2 (0.8mm), P5 (1.2mm); Tri-Wing Y0.6; Spanner U2.6; Triangle 2.3mm
Enclosure Dimensions 12.4 x 9.2 x 6.3 cm (4.88 x 3.62 x 2.48 inches)
Target Device Compatibility Apple iPhones, MacBooks, iPads; Android Devices; Nintendo Switch, Steam Deck, PS5/Xbox Controllers; Watches & Eyewear; Drones & Optical Assemblies

What Twenty-Four Bits Actually Buy You

  • ✦ Twenty-four S2 alloy bits heat-treated to HRC 58 to 62 with a manganese phosphate coating, so the edges hold their geometry instead of rounding on the second repair.
  • ✦ Magnetized bit seating that lifts micro screws out of a chassis and holds them on the tip until you decide where they go back.
  • ✦ Zero lateral play at the bit holder, which is the single reason a pentalobe screw either comes out clean or becomes a drill job.
  • ✦ 360 degree ball-bearing tail cap, so downward pressure stays constant while the fingers do the turning.
  • ✦ Triangular knurled handle in CNC aluminium, shaped so the driver does not roll off a bench when you set it down mid-repair.
  • ✦ Anodized 12.4 x 9.2 x 6.3 cm enclosure with stamped profile labels, pocketable enough to travel in a laptop bag and organised enough to use daily.
  • ✦ Security profiles included, Pentalobe P2 and P5, Tri-Wing Y0.6, Spanner U2.6 and Triangle 2.3 mm, the fasteners a consumer kit quietly leaves out.

Where This Kit Earns Its Place

The honest use case is a bench that handles more than one kind of object. A phone battery replacement on Saturday, a drone gimbal that picked up a wobble, a laptop hinge that needs its screws re-torqued, a watch case back that has to come off for a battery, a pair of glasses with a temple screw that will not stay seated. Each of those jobs needs a different tip and the same reliable seating, which is why a single well-made handle with a complete bit range outperforms a drawer of single-purpose drivers. It is also the kit that travels: field service engineers keep it in a laptop bag, makers keep it beside the printer, and anyone who has stripped a screw with a kitchen knife understands what it replaces.

The Cheap Set, Priced Honestly

A four-dollar precision set will open a device once. The bits are usually CR-V or unmarked steel at a hardness that deforms under load, the holder has visible play, and the magnet is weak enough that screws stay in the chassis. The failure is not dramatic, it is cumulative: the P2 slowly rounds, the T5 cams out on a tight screw, and the screw that finally strips is the one holding a component you cannot replace. The difference in this kit is metallurgy and tolerance, the two things that determine whether a fastener survives being removed twice. That is what the price buys, not a brand name on a case.

Frequently Asked Questions

Q: Will the Pentalobe bits fit current iPhone models?

A: The set includes P2 (0.8 mm) and P5 (1.2 mm), the two pentalobe sizes used on iPhone exteriors. The P2 is the one that removes the two screws either side of the charging port, and it is machined to seat fully rather than sit on the tips of the lobes.

Q: Is the magnet strong enough for stainless screws?

A: Yes for standard chassis screws, which are usually magnetic stainless or coated steel. Fully non-magnetic stainless will not cling to the tip, so plan to use tweezers on those. The magnet sits in the holder, so swapping bits does not weaken it.

Q: Can this handle a tight laptop hinge screw?

A: It can, within reason. The aluminium handle is deliberately slim for pocket carry, so leverage is lower than a full-size driver. For a fastener that has been torqued hard, apply steady pressure through the swivel cap rather than forcing the handle sideways, which is what rounds a bit.

Q: What is included in the case?

A: One CNC aluminium driver handle and twenty-four bits: Phillips PH000 to PH2, slotted SL1.5 to SL4.0, Torx security T2 to T15, hex H1.5 and H2.0, plus Pentalobe P2 and P5, Tri-Wing Y0.6, Spanner U2.6 and Triangle 2.3 mm. Bits are standard 4 mm hex, so replacements and extensions are easy to source.

Q: Do the bits fit other precision handles?

A: They are standard 4 mm hex shanks, so they work in most precision bit drivers and electric screwdrivers that accept that format. The handle in this set is the one tuned to them, but the bits are not locked to it.

Q: How should the bits be cared for?

A: Keep them dry, wipe them after use, and put them back in their stamped bay so the coating is not abraded against other steel. S2 at this hardness is shock resistant but not indestructible, so use the largest bit that fits the fastener rather than the smallest one that reaches.

The Kit, Photographed

The Micro Forge 25-in-1 precision screwdriver set, S2 alloy bits in anodized aluminium case The Micro Forge 25-in-1 precision screwdriver set, S2 alloy bits in anodized aluminium case The Micro Forge 25-in-1 precision screwdriver set, S2 alloy bits in anodized aluminium case The Micro Forge 25-in-1 precision screwdriver set, S2 alloy bits in anodized aluminium case The Micro Forge 25-in-1 precision screwdriver set, S2 alloy bits in anodized aluminium case The Micro Forge 25-in-1 precision screwdriver set, S2 alloy bits in anodized aluminium case The Micro Forge 25-in-1 precision screwdriver set, S2 alloy bits in anodized aluminium case The Micro Forge 25-in-1 precision screwdriver set, S2 alloy bits in anodized aluminium case

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Pavel G.
Replaced a drawer full of cheap sets

I had four drugstore precision kits, each with one usable bit and three that rounded within a month. This one lives in the aluminum case on my bench, the bits are stamped with their profile so I do not have to squint, and nothing shifts when the case is turned over.

J
Juno T.
Excellent bits, slim handle

The S2 bits show no rounding after a laptop teardown, a drone gimbal service and a watch back. The aluminum handle is genuinely slim, which is right for pocket carry but gives less leverage than a full-size driver on a stubborn hinge screw. For electronics work that is the correct trade.

S
Silas R.
Pentalobe P2 that actually fits, and it holds the screw

Opened an iPhone 13 to replace the battery and the P2 bit seated in the pentalobe screws with no cam-out. The magnetized tip lifts the tiny stainless screws out instead of leaving them stuck in the chassis. The swivel tail cap lets me hold downward pressure through the last quarter turn.

Payment and Security

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

You may also like

Recently Seen