Descripción
SPECIFICATIONS
Brand Name: JUNCTEK
Model Number: JDS6600-60MHz
Origin: Mainland China
Display Size: 3.0 - 4.9 Inches
Certification: CE
Certification: FCC
Certification: pse
DIY Supplies: ELECTRICAL
Choice: yes
semi_Choice: yes
|
|
|
|
JDS6600 series Dual-channel Function Signal generator combines multiple functions in one, such as Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Sweep, Counter and Frequency Meter, etc. The instrument adopts the Direct Digital Synthesizer(DDS) technology and provides stable, precise, pure and low distortion signals. It's a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching. |
►320*240 2.4" TFT color LCD display, simultaneously display parameters of CH1 and CH2
►Ability to reproduce patterns of custom waveform
►Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation
►60 groups of arbitrary wave storage function, memory depth of each group is 2048*14bits
►Duty-cycle of each channel can be adjusted independently, the adjusting resolution is 0.1%
►With digital signal output function, CMOS output range 0~10V
►The model sold on this link is JDS6600-60M,The maximum sine wave frequency is 60MHz, and the maximum square wave is 25MHz, 266MSa/s sampling rate and 14bits vertical resolution
►Equivalent performance-phase difference 360°continuously adjustable.Equivalent performance dual channels can simultaneously output the same or different function signals or arbitrary waveform signals, all parameters can be adjusted independently, and the phase difference between the two channels is continuously adjustable from 0-359.9 °.
►Trigger functions-Four trigger modes.You can use sine wave, square wave, saw-tooth wave or arbitrary wave to generate pulse train. The number of pulse periods is continuously adjustable between 0-1048575.
►Pulse width-precisely adjustable.With independent operation interface, the function is clear; with independent control switch, it is convenient to control. Adjustment range: 25ns-4000s; pulse offset continuously adjustable between 0% -120%; pulse amplitude can continuously adjust between 0-10V, and be accurate to 0.01V.
►Arbitrary waveform can be draw. Provide free host computer software and communication protocol, use the host computer software to draw arbitrary waveforms; use the communication protocol to secondary development programming; all functions of the instrument can be controlled by the host computer software.
Frequency Characteristics | ||||||||||
JDS6600-15M |
JDS6600-30M |
JDS6600-40M |
JDS6600-50M |
JDS6600-60M |
||||||
Sine wave frequency range |
0~15MHz |
0~30MHz |
0~40MHz |
0~50MHz |
0~60MHz |
|||||
Square wave frequency range |
0~15MHz |
0-25MHz |
0-25MHz |
0-25MHz |
0-25MHz |
|||||
Triangle wave frequency range | ||||||||||
Pulse wave frequency range |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
|||||
TTL digital wave frequency range | ||||||||||
Arbitrary frequency range | ||||||||||
Pulse width adjustment range |
100nS~4000S |
50nS~4000S |
40nS~4000S |
30nS~4000S |
25nS~4000S |
|||||
Square wave rise time |
≤25ns |
≤15ns |
≤10ns |
≤10ns |
≤10ns |
|||||
Minimum frequency resolution |
0.01uHz（0.00000001Hz） |
|||||||||
Frequency accuracy |
±20ppm |
|||||||||
Frequency stability |
±1ppm/3hours |
|||||||||
Waveform characteristics | ||||||||||
Waveform type |
SineSquare、pulse (adjustable duty cycle, precise adjustment of pulse width and period), triangular wave, partial sine wave, CMOS wave, DC level (set DC amplitude by adjusting offset), half wave, full Wave, positive staircase wave, anti-ladder wave, noise wave, exponential rise, exponential drop, multisonic wave, Symplectic pulse and Lorenz pulseand 60 arbitrarywave forms. |
|||||||||
Wave length |
2048 points |
|||||||||
Waveformsampling rate |
266MSa/s |
|||||||||
Waveform vertical resolution |
14-bits |
|||||||||
Sine wave |
Harmonic Suppression |
≥45dBc(<1MHz); ≥40dBc(1MHz~20MHz) |
||||||||
Total harmonic distortion |
<1%(20Hz~20kHz,0dBm) |
|||||||||
Square wave and pulse wave |
Overshoot |
≤5% |
||||||||
Pulse wave |
Duty cycle adjustment range |
0.1%~99.9% |
||||||||
Partial sine wave |
Duty cycle adjustment range |
0.1%~99.9% |
||||||||
Saw-tooth wave |
Linearity |
≥98%(0.01Hz~10kHz) |
||||||||
Output characteristics | ||||||||||
Sine wave amplitude range |
Frequency ＜ 11MHz |
11MHz ≤ Frequency ＜ |
31MHz ≤ Frequency |
|||||||
2mVpp~20Vpp |
2mVpp~10Vpp |
2mVpp~5Vpp |
||||||||
|
Squarewave 、 Triangle wave amplitude range |
Frequency ≤ 10MHz |
10MHz ≤Frequency ≤25MHz |
||||||||
2mVpp~20Vpp |
2mVpp~5Vpp |
|||||||||
Amplituderesolution |
1mV |
|||||||||
Amplitudestability |
±0.5%/5 hours |
|||||||||
Flatness ofamplitude |
±5%(<10MHz); ±10%(>10MHz) |
|||||||||
Waveform output | ||||||||||
Outputimpedance |
50Ω±10% (typical) |
|||||||||
Protection |
All signal outputs can work within 60 seconds when the load is short-circuited. |
|||||||||
DC offset | ||||||||||
Offsetadjustment range |
|Offset|≤10-ampilitude/2 |
|||||||||
Offset resolution |
0.01 V |
|||||||||
Phase characteristics | ||||||||||
Phaseadjustment range |
0~359.9° |
|||||||||
Phase resolution |
0.1° |
|||||||||
TTL/CMOS output | ||||||||||
Low level |
<0.3V |
|||||||||
High level |
1V~10V |
|||||||||
Level rise/fall time |
≤20ns |
|||||||||
External measurement function | ||||||||||
Frequencymeter function |
Frequency measurement range |
1Hz~100MHz |
||||||||
Measurement accuracy |
Gate time 0.01S~10s continuous adjustment |
|||||||||
Counter function |
Counting range |
0-4294967295 |
||||||||
Coupling method |
DC and AC coupling methods |
|||||||||
Counting method |
Manually |
|||||||||
Input signal voltage range |
2Vpp~20Vpp |
|||||||||
Pulse width measurement |
0.01us resolution, measure up to 20s |
|||||||||
Period measurement |
0.01us resolution,measure up to 20s |
|||||||||
Sweep function | ||||||||||
Sweep channel |
CH1 or CH2 |
|||||||||
Sweep type |
Linear sweep, logarithmic sweep |
|||||||||
Sweep time |
0.1s~999.9s |
|||||||||
Setting range |
Any setting between the maximum output frequency of the corresponding model of the starting point (0.01Hz) and the end point |
|||||||||
Sweep direction |
Forward, reverse and round trip |
|||||||||
Bursting function | ||||||||||
Number of pulses |
1-1048575 |
|||||||||
Burst mode |
Manual burst, CH2 burst, external burst (AC), external burst (DC) |
|||||||||
General specifications | ||||||||||
Display |
Display type |
2.4 inch TFT color LCD display |
||||||||
Store and load |
Quantity |
100 |
||||||||
Position |
00 to 99 (00 memory location parameter is loaded by default as power on) |
|||||||||
Arbitrary wave |
Quantity |
1 to 60 total 60 groups (15 groups by default as power on) |
||||||||
Interface |
Interface mode |
USB to serial interface |
||||||||
Extension interface |
With TTL level mode serial interface for user secondary development |
|||||||||
Communication speed |
Adopt standard 115200bps |
|||||||||
Protocol |
Using the command line, the protocolis made public |
|||||||||
Power supply |
Voltage range |
DC5V±0.5V |
||||||||
Manufacturing technology |
Surface mount technology, large-scale integrated circuits, high reliability, long service life |
|||||||||
Prompt tone |
Users can turn on or off by setting program |
|||||||||
Operating characteristics |
All key operations, knob continuous adjustment |
|||||||||
Environmental conditions |
Temperature: 0~40℃ Humidity: <80% |
|||||||||
1. DDS Signal Generator*1
2. Power Adapter(In:100~240V~50/60Hz,Out:5.0V-0.2A)*1 3. BNC-BNC Cable*1
4. USB Data Cable*1 5. BNC-Clip Cable*2
|
Warranty 1.- One year guarantee. 2.- If the item is defective when you have received, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition). 3.- One we get the returned items, we will send the replaced ones back as soon as possible. 4.- Our warranty does not extend to any products that are physically damaged or under abnormal operating conditions as a result of misuse or improper installation on the parts. Shipment 1.- We can ship the products all the world. 2.- DHL, FedEx, UPS, EMS, China PostAir Mail, AliExpressStandard Shipping are all available. 3.- The item will be sent out with 3 days after receiving the payment. 4.- Please make sure your delivery address and contact telephone number are correct when you bid the item. 5.- You can track the situation of your product on website after they are shipped out. 6.- SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. 7.- If you have not received your shipment within 45 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply.
Return/Refund 1.- You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we can not refund or send replacement. Shipping cost is bear by both seller and buyer in half. 2.- All returned items MUST BE in the original packaging and please provide us with the shipping tracking number and specific reason for the return. Import Taxes or Duties 1.- Import duties, taxes and other charges happened in your side are not included in the price of the item. These fees are afforded by buyer. 2.- Please check with you country's Customs office to determine what these additional costs will be before purchase. 3.- Please confirmed detailed information about delivery invoice. For example, how much price we should write on the waybill invoice, or how to describe the item, etc... Feedback 1.- As your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. 2.- Our program will leave back the same feedback to you after your positive feedback. 3.- Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems. Thank you very much |
Pagamento e Segurança
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.