Description
Pulling a valve spring usually means pulling a cylinder head, and pulling a head means a gasket, new head bolts, and an afternoon that was not in the plan. The Valve Wrench exists to avoid that entire sequence. It is a universal overhead valve spring compressor that works through the spark plug hole and the rocker cover opening, compressing the spring in place so a valve stem seal or a single bent valve can be dealt with without lifting the head off the block.
The tool is carbon steel with a zinc plated finish, which is the right material call for something that lives in a toolbox and gets loaded repeatedly. The rotary switch drives the compressor foot down against the retainer, and the mechanical advantage is the reason the job does not become a forearm workout: the thread does the work, the hand only turns it. Overall size is 14.1 by 7.6 by 4 cm at under a pound, small enough to sit in a top drawer rather than a dedicated case, and the jaws are shaped to locate on the spring retainer rather than slipping off the side.
The design is aimed at the engines people actually work on. It suits most cars and light trucks with overhead valves, which covers the majority of four cylinder engines that come into a home workshop. It is a specialized tool rather than a universal one, and that is honest: on a deeply recessed multi-valve head a dedicated manufacturer tool may still be needed, but for the common overhead valve job the geometry here is correct and the cost is a fraction of the OEM equivalent.
The right tool does not make the job easy. It makes the job not become a different job.
What It Saves You From
- ✦ Compresses valve springs with the cylinder head still on the engine.
- ✦ Carbon steel body with a zinc plated finish that resists rust in a toolbox.
- ✦ Rotary switch drives the foot down on a thread, so effort is turning, not squeezing.
- ✦ Jaws shaped to locate on the retainer instead of slipping off the spring.
- ✦ Fits most cars and light trucks with overhead valve engines.
- ✦ Compact at 14.1 by 7.6 by 4 cm, small enough for a top drawer.
- ✦ One piece, no assembly and no adapters to lose.
Technical Specifications
- Type Universal overhead valve spring compressor
- Material Carbon steel, zinc plated
- Color Black
- Size 14.1 by 7.6 by 4 cm, about 5.5 by 2.2 by 1.6 in
- Weight Under a pound
- Operation Rotary switch, threaded compression
- Application Mechanical repair, automotive engine service
- Fitment Most cars and light trucks with OHV engines
- Quantity 1 piece
- Use Note Specialized multi-valve heads may still require an OEM tool
The Jobs That Justify Owning One
Valve stem seal replacement is the number one use, because it is a job done with the head on and the tool pays for itself the first time. Diagnosing a burnt valve is the second, since a compression test tells you which cylinder but only a visual inspection tells you why. Home mechanics working through a top end refresh use it to pull springs for inspection and lapping. Small engine shops use it on mower and generator engines, which are overhead valve and rarely have a factory tool in reach. Anyone restoring an older car will find it saves the head gasket and the head bolt set that a removal would otherwise require, which is a multiple of the tool cost on its own.
Before You Use It
Q. Do I have to remove the cylinder head?
No, and that is the entire purpose of the tool. It reaches the spring through the existing top end access so the head stays bolted to the block.
Q. Will it work on my engine?
The stated fitment is most cars and light trucks with overhead valve engines. Deeply recessed multi-valve heads and some modern engines need a manufacturer-specific tool, so confirm the head layout before starting.
Q. How does the compression actually happen?
A rotary switch turns a thread that drives the foot down onto the valve retainer. The thread provides the mechanical advantage, which is why the tool does not need a long lever or a second hand.
Q. Is the finish going to rust?
The body is carbon steel with a zinc plated finish, which is a working finish rather than a decorative one. Wipe it down after use and keep it dry and it will outlast the job by decades.
Q. Can it install new springs as well as remove them?
Yes. Compression works in both directions, so it seats a new spring and retainer the same way it releases the old one.
Q. What about the keepers, do they fall out?
They can, which is why a magnetic pick-up tool and a clean rag over the head are standard practice. Release the compression slowly and the retainers stay where you can see them.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
