The Cassette Breaker | Freewheel Body and Hub Lockring Removal Tool

Save 20%
EastSupplier PlatformSKU: 1005003356864628-as shown-belgium

Color: as shown
Price:
$24.07 $30.09

Shipping calculated at checkout

Stock:
In stock

Description

Every lockring wins eventually. It wins with salt, with winter commuting, with the fine grit that works its way into a thread and stays there for three seasons. Then a cassette service that should take four minutes becomes a forty minute argument with a tool that rounds the notches and takes the hub with it. The difference between those two afternoons is rarely skill. It is whether the removal tool engaged the full depth of the spline or only the top two millimeters of it.

This tool is built around that single requirement. The head carries the full notch pattern for freewheel bodies and standard lockrings, machined so the teeth seat completely instead of skating on the surface. It takes a half-inch square drive, which means a breaker bar or a torque wrench rather than a spanner, and it can be clamped in a bench vise so the wheel turns against a fixed tool instead of the tool turning against a moving wheel. That reversal is what stops a stubborn lockring from becoming a damaged hub.

The body is hardened steel with a black oxide finish, heavy enough that the engagement feels like a machined fit and not a guess. It sits in a toolbox without rusting through a damp winter, and the length gives enough leverage that most lockrings release with a firm push rather than a shock load. For a workshop it is one tool that covers the freewheel and cassette jobs that come in every week. For a home mechanic it is the tool that turns a shop visit into twenty minutes in the garage.

The right tool does not make the job easy. It makes the job reversible.


Built for the Stuck Ones

  • ✦Full-depth notch pattern that engages the spline instead of stripping its top edge.
  • ✦Half-inch square drive for a breaker bar, torque wrench or impact driver.
  • ✦Vise-clampable body so the wheel turns and the tool stays fixed.
  • ✦Hardened steel construction with a black oxide finish against corrosion.
  • ✦Length chosen for leverage on seized lockrings, not for shelf appeal.
  • ✦Covers freewheel body removal and standard cassette lockring service.
  • ✦Compact enough to live in a portable race or mobile mechanic kit.

Technical Detail

  • Type: Freewheel body and lockring removal tool
  • Material: Hardened steel
  • Drive interface: 1/2 in square drive
  • Alternative use: Clamp in bench vise, turn the wheel
  • Compatibility: Standard notch freewheel bodies and cassette lockrings
  • Finish: Black oxide
  • Model: TB-1018
  • Use with: Breaker bar, torque wrench, or 24 mm spanner on the flats
  • Storage: Single-piece body, no loose adapters
  • Origin: Mainland China

Where It Belongs

It belongs in three places. On a workshop bench, where freewheel and cassette jobs arrive weekly and a rounded lockring costs a hub. In a home garage, where one seized cassette is enough to justify owning the correct tool instead of borrowing an adjustable one. And in a mobile kit for race support or bike hire fleets, where a drivetrain has to come apart at the roadside without a vise within reach. In each case the requirement is the same: engage the spline fully, hold the wheel still, and apply torque in a straight line.

Before You Buy

Q: Will it fit my cassette lockring?

It is built for standard notch freewheel bodies and lockrings, which covers the majority of Shimano-pattern and equivalent drivetrains. If your lockring uses a different notch count, check the pattern against the head before ordering.

Q: Does it work without a bench vise?

Yes. A half-inch breaker bar on the square drive is enough for most lockrings, with the wheel held by the tyre or a chain whip as the situation requires. The vise option exists for the ones that have been seized for years.

Q: Can I use an impact gun?

The square drive accepts one, though for a freewheel body the safer sequence is a steady breaker bar first. Impact torque on a thin hub flange is the usual cause of the damage this tool is meant to prevent.

Q: Will it damage the lockring notches?

Engagement across the full depth is what prevents that. Damage happens when a shallow tool contacts only the top edge of the spline and the load concentrates there.

Q: Is it for freewheels or cassettes?

Both. The same head covers freewheel body removal and standard cassette lockring service, which is why it stays in the toolbox rather than in a drawer.

Q: How do I keep it working?

Wipe the grease off after use and store it dry. The black oxide finish handles damp workshops, but a light oil film on the drive end keeps the square interface clean.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Jolanda G.
Second one I have bought

Bought one for the workshop and a second for home so I stop carrying tools back and forth. Half inch drive means it takes a torque wrench, which is the reason I bought it in the first place.

I
Ivo P.
Better in a vise than in the hand

Clamped it in the bench vise and turned the wheel instead, which is the way it wants to be used. Solid steel, no flex. Only note is that it is heavier than a folding tool, so it stays in the workshop rather than the saddle bag.

H
Halina J.
Engaged the spline properly and it came straight off

The lockring on my winter bike had been on for three seasons. This seated fully, one firm push on a breaker bar and it released. The old tool I borrowed had started to round the notches, this one did not touch them.

Payment and Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently Seen