Description
A bearing comes out one of two ways. With the right sleeve it slides free in a minute. With a hammer and a punch it comes out damaged, takes the bore with it, and turns a twenty-minute job into a hub replacement. The Bearing Press is a 26-piece sleeve kit that spans the sizes most cars, light commercial vehicles and heavy goods engines actually use, so the correct disc is in the case instead of being improvised from a socket.
The set is built around twenty press sleeves with inside diameters from 34 to 72 mm and outside diameters from 44 to 82 mm, plus two sleeve end caps and four pulling spindles in M10, M12, M14 and M16 with matching nuts and thrust bearings. That spread covers wheel bearings, bushings, silent blocks, hydraulic bushes and seals without the alignment problems that come from stacking adapters. The material is forged high carbon steel, heat treated for hardness and wear resistance, which is what keeps the sleeve faces flat after repeated pressing instead of mushrooming.
The working method is straightforward: select the disc that matches the bore, thread the correct spindle through with a thrust bearing on the nut, and draw the bearing in or out on the thread rather than driving it with impact. That is why the kit removes bearings without distorting the housing, and it is the difference between a tool a professional shop uses daily and a set that survives one job. Everything sits in a molded storage case with a one year warranty, and the whole kit weighs roughly 19 kg, which is heavy because the steel is real.
A bearing changed without a hammer is a bearing that lasts its full service life.
Key Features
- ✦ 26 pieces covering removal and installation of bearings, bushes, silent blocks and seals
- ✦ 20 press sleeves with 34-72 mm inside diameter and 44-82 mm outside diameter
- ✦ Four pulling spindles in M10, M12, M14 and M16 with nuts and thrust bearings
- ✦ Forged high carbon steel, heat treated for hardness and wear resistance
- ✦ Draws bearings on the thread rather than driving them, protecting the bore
- ✦ Universal fitment across passenger cars, LCV and HGV engines, domestic and import
- ✦ Molded storage case with a one year warranty
Technical Specifications
- Pieces26
- Press sleeves20, inside diameter 34-72 mm
- Sleeve outside diameter44-82 mm
- End caps2
- Pulling spindles4, M10 / M12 / M14 / M16 with nuts and thrust bearings
- MaterialForged high carbon steel, heat treated
- WeightApprox. 19 kg
- Case dimensions56.5 x 33.5 x 14 cm
- FitmentUniversal, cars, LCV and HGV engines
- Warranty1 year
Where It Belongs
Independent workshops that need one case to cover wheel bearings, control arm bushes and subframe mounts across mixed makes; dealership technicians doing suspension and driveline work where a distorted bore is not acceptable; mobile mechanics who carry a single case instead of a drawer of improvised adapters; and serious home mechanics rebuilding a front end on a car they intend to keep. The four spindle sizes handle the fastener range on most European and Japanese platforms.
Questions Buyers Ask
What is included in the 26 pieces?
Twenty press sleeves, two sleeve end caps, and four pulling spindles in M10, M12, M14 and M16 with nuts and thrust bearings, all in a molded case.
What size bearings will it cover?
Sleeves span 34 to 72 mm inside diameter and 44 to 82 mm outside diameter, which covers the majority of automotive wheel bearings, bushes and seals.
How does it remove a bearing without damaging the bore?
By drawing the bearing out on a threaded spindle against a thrust bearing rather than driving it with impact. The force is axial and controlled instead of shock-loaded.
Will it work on a light commercial vehicle?
Yes, and on heavy goods engine applications as well. The kit is described as universal across cars, LCV and HGV.
Can I use an impact gun with the spindles?
No. Turn the nuts by hand with a wrench. Impact loading is what strips threads and distorts sleeves, and it defeats the purpose of the tool.
What steel are the sleeves made from?
Forged high carbon steel with heat treatment for hardness and wear resistance, which keeps the faces flat across repeated presses.
How heavy is the kit?
Roughly 19 kg in the case. It is a shop tool rather than a pocket kit, and the weight is the steel.
Does it include a case?
Yes, a heavy duty molded storage case. The color of the case varies by batch.
Is there a warranty?
One year warranty against manufacturing defects.
Will it install bearings as well as remove them?
Yes. The same sleeves and spindles press a new bearing in squarely, which is the half of the job most improvised kits cannot do.
The EastSupplier Promise
Every unit is inspected before it leaves the warehouse and ships from the region closest to you. If a specification on this page does not match what arrives, we replace it. Requests are answered within one business day by people who handle the product, not a script. EastSupplier supplies brands, workshops and retailers across North America, Europe and Australia from a catalog of more than fifty thousand lines.






Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
