Description
Nothing about recovery is fast. A vehicle that has slid off a wet field, a boat that has drifted off its trailer, a load that has shifted in a truck bed: all of it moves at the speed of a handle turning, and the tool that does it has to survive being the only thing between the load and gravity. The Slow Haul is an 800 lb hand winch with 33 feet of steel cable, a two-way ratchet and a forged hook, built for exactly that kind of patient, unglamorous work.
The gearing is where the design earns its name. Two speeds give a 4:1 and an 8:1 ratio from the same handle, so a long pull comes in quickly in the low ratio and a stubborn load comes in slowly with the mechanical advantage multiplied. The gears are heat-treated and rust resistant, the 10 inch handle gives enough leverage to work without gloves, and the ratchet holds on both directions of travel instead of freewheeling when you let go. The hook is a one-piece forging with a wide opening and a self-locking latch, which matters more than the pull rating when the load is a strap eye rather than a clean ring.
The cable is 33 feet of steel wire rated to the winch, and the load figures are 800 lb for the 800 lb model with the frame sized for that working load rather than a peak one. Mounting is four bolts through the base plate, the handle sets on a square shaft, and the ratchet lever selects direction. No battery, no hydraulics, no fluid to check: it works in the cold, in the rain, and after a year of sitting in a shed, which is the entire argument for a hand winch over the powered alternative.
Power fails. A ratchet does not.
What Makes It Different
- ✦800 lb rated pull with 33 ft of steel wire cable
- ✦Two-speed 4:1 and 8:1 gearing from a single handle
- ✦Heat-treated, rust-resistant gears built for weather
- ✦Two-way ratchet holds the load in both directions
- ✦One-piece forged hook with a wide opening and self-locking latch
- ✦10 inch handle for leverage without gloves
- ✦Four-bolt base plate mounting, no power or hydraulic fluid
Technical Specifications
- Capacity800 lb model, frame rated for working load
- Cable33 ft steel wire cable
- GearingTwo-speed, 4:1 and 8:1
- RatchetTwo-way, self-locking
- HookOne-piece forged, wide opening, safety latch
- Handle10 inch, easy grip
- GearsHeat treated, rust resistant
- MountingFour-bolt base plate
- CertificationCE
- DriveManual, no power supply required
Where It Earns Its Place
Trailer owners use it to drag a boat or an empty trailer up a slipway where the tow vehicle cannot go. Farmers and smallholders pull fence posts, drag logs and haul equipment out of mud. Off road drivers keep one bolted to a trailer bed as the manual fallback for the day the electric winch has a flat battery. Workshops use it for pulling frames straight and lifting awkward assemblies that a hoist cannot reach. The common thread is a job that needs controlled, slow force in a place where nobody wants to run a cable to a battery.
The EastSupplier Promise
Sourced directly from vetted manufacturing partners, inspected before dispatch, and priced without distributor layers. If the item arrives outside specification, we replace it or refund it. Every listing on this store is curated by a human buyer, not bulk-imported and abandoned.
Questions Buyers Actually Ask
Q: How much can it actually pull?
The 800 lb model is rated for an 800 lb working load. Remember that a stuck vehicle needs far more force than its weight to break free, and a rolling load needs much less, so match the winch to the job rather than to the object's weight alone.
Q: What is the difference between the two speeds?
The 4:1 ratio moves the cable faster with less mechanical advantage, which is what you want for taking up slack. The 8:1 ratio pulls more slowly with double the leverage, which is how a heavy load gets moving without exhausting the operator.
Q: Can the cable be replaced?
Yes, the drum takes a replacement steel cable of the same diameter and length. Keep the rated cable rather than swapping in rope unless the drum and hook are rated for it, since the load path is designed around wire.
Q: Does the ratchet hold when I let go of the handle?
Yes. The two-way ratchet locks in either direction of travel, so the handle can be released mid-pull without the load running back. That is the single feature that makes a manual winch safe to operate alone.
Q: Can I mount it on a trailer or a wall?
The base plate takes four bolts, so a trailer bed, a shed wall with proper backing, or a purpose-built post all work. Use bolts and backing plates rated well above the winch capacity, since the mounting is usually the weakest link.
Q: Does it need maintenance?
A little. Keep the cable wound under tension, oil the gears occasionally, and check the hook latch before each use. There is no fluid, no battery and no motor to service, which is the reason it still works after a season in a shed.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.