Description
Hot water should arrive when you ask for it, not thirty seconds later.
A storage tank heats water whether you need it or not, then loses that heat through its own walls until the next time you open the tap. In a small kitchen, a workshop sink, a garage utility basin or a rental unit where a plumbed tank is impractical, that arrangement is both wasteful and unnecessary. The Instant Spring takes the tank out of the equation entirely.
The unit is a faucet with a heating core built into the body. Water passes over a stainless steel heating element on its way to the spout and arrives hot within seconds of opening the valve. Nothing is stored, so nothing cools, and the electrical draw happens only while water is actually running. For intermittent use, which describes most utility sinks, that is the sensible way to heat water.
The heating element sits in a stainless steel housing rather than a plated one, which matters where the local water supply is hard or slightly aggressive. A universal adapter nozzle is included so the unit can be fitted to standard plumbing without sourcing a matched spout separately. The tap operates as an ordinary mixing faucet on the cold side, and the heater engages only when the hot side is opened.
It is not intended for a whole house. It is intended for the one sink where waiting for hot water has always been annoying, and where a tank was never a reasonable option in the first place.
For the sink that was never worth a tank, this is the right answer.
Key Features
-
✦ Instant Heating Core
Water is heated as it passes the element, so hot water arrives within seconds rather than after a tank warms. -
✦ No Storage Tank
There is no standing supply of hot water to keep warm, so standby heat loss is eliminated. -
✦ Stainless Steel Heating Housing
The element is housed in stainless steel, which suits harder water supplies better than plated alternatives. -
✦ Universal Adapter Nozzle
An adapter nozzle is included so the faucet can be fitted to standard plumbing without extra parts. -
✦ Compact Single-Unit Design
The heater and faucet are one unit, which frees the space beneath the sink that a tank would occupy. -
✦ Mixing Faucet Operation
The cold side works as a normal tap, and the heater engages only when hot water is drawn. -
✦ Suited to Intermittent Use
Electricity is consumed only while water is flowing, which suits utility and secondary sinks.
Technical Specifications
- Product Type: Tankless instant hot water faucet
- Power Supply: 220V AC
- Heating Element: Stainless steel heating core
- Time to Hot Water: Within seconds of opening the tap
- Installation: Standard sink tap installation with universal adapter nozzle
- Operation: Mixing faucet, heater engages on the hot side
- Storage: None, tankless flow-through design
- Body Material: Stainless steel heating housing with faucet body
- Suitable Locations: Kitchen, utility sink, workshop, garage, small rental units
- Water Supply: Standard mains pressure connection
Where It Belongs
The Instant Spring is intended for the sinks where a tank was never practical. A workshop or garage utility basin used a few times a day is the clearest case: a tank would spend most of its life reheating water nobody is drawing. A basement bar or utility room sink is the same story. Small rental units and converted outbuildings often have no tank provision at all, and a flow-through faucet solves that without a plumbing project. It also suits a kitchen where the main sink is far from the water heater and a dedicated hot tap at a secondary basin makes daily work simpler.
Frequently Asked Questions
Q: How quickly does the water get hot?
A: The element heats water as it passes, so hot water reaches the spout within seconds of opening the tap. There is no tank to pre-warm beforehand.
Q: Can it supply a whole house?
A: No. It is designed for a single sink or basin. For whole-house supply a dedicated water heater is the correct solution, and this unit is meant for the secondary sink where a tank is impractical.
Q: Does the unit use power when it is not in use?
A: The heater engages only while water is flowing, so there is no standby draw to warm a stored tank.
Q: What is included for installation?
A: The faucet unit with its built-in heating core and a universal adapter nozzle to suit standard plumbing connections.
Q: Is it suitable for hard water?
A: The heating element is housed in stainless steel rather than a plated housing, which tolerates harder water better. Periodic descaling is still advisable in very hard water areas.
Q: Does the cold side work normally?
A: Yes. The tap functions as an ordinary mixing faucet, and the heater activates when the hot side is opened.
Product Gallery
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.