Description
The Fire Does Not Belong to the Living Room. It Belongs to the Wilderness.
For a hundred thousand years, fire has been the center of human settlement. It is where stories are told, where hands are warmed, where meat is transformed into sustenance. The Frontier Hearth reclaims this primordial ritual and delivers it into the backcountry. When the sun drops behind the ridgeline and the mountain air turns sharp, this stainless steel sentinel transforms a canvas tent into a sanctuary. The 700 cubic inch firebox consumes split logs with controlled ferocity while the 80-inch chimney stack carries smoke above the snow line — a vertical column of heat that announces your camp to the stars and to no one else.
Fabricated from heavy-gauge stainless steel, the Frontier Hearth is engineered for the thermal cycling that destroys lesser stoves. The firebrick-lined interior retains heat through the night's coldest hours, radiating warmth long after the last log has collapsed into embers. The front-loading door with integrated air control damper lets you throttle the burn rate from a rolling boil to a gentle overnight simmer. The removable cooktop plate accepts cast iron skillets and percolators directly — morning coffee brewed on the same surface that kept you alive through the night.
The included chimney pipe sections nest inside the firebox for transport, collapsing the entire system into a package that rides comfortably in a truck bed or sled. Heat-resistant gloves, a chimney brush, and spark arrestor cap complete the kit — everything required to establish a heated base camp arrives in a single box. This is not a recreational accessory. It is the difference between a trip shortened by cold and a winter expedition extended by comfort.
Warmth is not a luxury. It is the first condition of wilderness survival.
Key Features
- ✦ Heavy-Gauge Stainless Steel: Resists warping under repeated thermal cycles — built for multi-season deployment, not a single weekend
- ✦ 700 Cubic Inch Firebox: Accommodates full split logs — extended burn time without constant feeding
- ✦ 80-Inch Chimney System: 5-section stackable pipe with spark arrestor cap — carries smoke above tent peaks and snow accumulation
- ✦ Integrated Air Control Damper: Front-mounted adjustable intake — fine-tune burn rate from rolling boil to overnight smolder
- ✦ Removable Cooktop Plate: Direct surface for cast iron cookware — boil water, fry breakfast, or simmer stew without a separate stove
- ✦ Complete Kit: Includes chimney pipes, heat-resistant gloves, spark arrestor, ash rake, and chimney brush — ready to deploy out of the box
- ✦ Nestable Transport: Chimney sections and accessories pack inside the firebox — compact enough for truck bed, sled, or ATV trailer
Technical Specifications
- Material: Heavy-gauge 304 stainless steel body with firebrick lining
- Firebox Volume: 700 cubic inches (approx. 11.5 liters)
- Overall Height: 80 inches (203 cm) with full chimney assembly
- Chimney Diameter: 2.36 inches (60mm) outer diameter
- Chimney Sections: 5 stackable pipe segments with locking rings
- Door Type: Front-loading with air-tight gasket and adjustable damper
- Spark Arrestor: Stainless steel mesh cap — prevents ember escape
- Weight: Approx. 44 lbs (20 kg) complete kit
- Tent Compatibility: Canvas wall tents, yurts, ice fishing shelters with stove jack
- Included Accessories: Heat-resistant gloves, chimney brush, ash rake, spark arrestor cap
Application Scenarios
The Frontier Hearth finds its purpose wherever controlled fire meets temporary shelter. Winter canvas tent camps — the classic hot-tent setup — are the primary deployment: hunters on extended backcountry trips, ice fishing parties on frozen lakes, and snowmobilers establishing base camps in alpine terrain. The stove runs continuously for days, drying wet gear hung from tent ridges while providing a gathering point for the group. Yurt and wall-tent dwellers in off-grid communities use it as primary heating through shoulder seasons when nights dip below freezing but full winterization is not yet required. Bushcraft instructors and wilderness therapy programs rely on the reliability of heavy-gauge steel over thin titanium alternatives — a stove that survives the enthusiasm of rotating groups of students season after season. For glamping operators adding cold-weather capacity, the Frontier Hearth transforms unheated canvas accommodations into four-season revenue streams with a single equipment investment.
Frequently Asked Questions
Q: What size tent can this stove effectively heat?
A: The Frontier Hearth is rated for canvas wall tents and yurts up to approximately 250 square feet (23 m²) in moderate winter conditions (20°F to 40°F / -7°C to 4°C). In extreme cold below 0°F (-18°C), expect effective heating for 100-150 square foot shelters. Heating capacity depends heavily on tent insulation, wind exposure, and burn rate — a well-sealed canvas tent with a stove jack positioned correctly will retain heat dramatically better than a drafty nylon shelter.
Q: Does the chimney installation require cutting a hole in my tent?
A: You need a stove jack — a fire-resistant opening in the tent wall or roof. Most canvas hot tents come with a pre-installed stove jack. If your tent does not have one, silicone-impregnated fiberglass stove jack kits are available separately and can be sewn or riveted into canvas. Never route the chimney through a standard nylon tent without a proper stove jack — the pipe surface temperature exceeds nylon melting points.
Q: How long will a full firebox burn on one load of wood?
A: With the damper set to a moderate burn, expect 2-4 hours per load of seasoned hardwood. Softwoods (pine, spruce) burn faster — approximately 1.5-2 hours. For overnight heating, load the firebox fully with dense hardwood, reduce the damper to minimum, and expect 4-6 hours of declining heat output. The firebrick lining continues radiating warmth for 1-2 hours after visible flames subside.
Q: Is assembly required, and how difficult is setup in the field?
A: The stove arrives fully assembled — attach the chimney pipe sections (slip-fit with locking rings), position the spark arrestor, and you are ready for the first fire. Chimney setup takes approximately 5 minutes solo. The entire system breaks down into the firebox for transport in about the same time. No tools required for field assembly or disassembly.
Q: Can I cook directly on the stove top, or do I need a separate cook surface?
A: The removable cooktop plate is designed for direct cooking. Cast iron skillets, stainless steel pots, and percolators all work well. The plate surface temperature varies by firebox intensity — for simmering, reduce the damper and push coals to the rear; for boiling, open the damper fully and position cookware directly over the hottest zone. The plate is removable for cleaning and for direct-flame cooking when desired.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.