The Alloy Thread | 1.75mm Metal-Pigment PLA Filament, 1kg Spool

Save 20%
EastSupplier PlatformSKU: 1005011633898994-1KG Metal Champagne-GERMANY

Color: 1KG Metal Champagne
Price:
$49.47 $61.84

Shipping calculated at checkout

Stock:
In stock

Description

A print is judged twice. Once when it comes off the bed, and again when someone who did not print it picks it up. The first judgement is structural. The second is surface, and surface is where most functional prints lose their argument. Layer lines read as process. A metallic sheen reads as material. The gap between those two readings is usually a weekend of sanding, priming and painting, and PLA Metal exists to delete that weekend.

The pigment system carries a metal effect through the whole extrusion rather than sitting on the skin, so the sheen survives handling, wear and the occasional drop. The surface finishes smooth enough that layer lines recede, which is what makes the parts read as cast rather than deposited. Luster is not fixed: raising temperature and slowing the print brings out deeper metallic contrast, while faster, cooler passes give a flatter alloy look. That control turns one spool into a small palette of finishes.

What matters most for anyone who has run abrasive filament before is what is absent. The formula carries no large metal particles, so it does not grind away at the nozzle the way particle-filled metallics do. Toughness and impact resistance are above standard PLA, which means brackets, enclosures and armour panels survive being flexed. It prints on ordinary PLA parameters, so there is no new profile to dial in. And the spool carries an identification chip that the ACE Pro reads automatically, which removes the last piece of manual setup from a material swap.

The practical consequence is that a spool stops being a single look. Print the same bracket at 215 and at 195 degrees and you get two visually distinct parts from one material, which is useful when a design needs a satin housing and a brighter bezel that still match in tone. Because the effect runs through the extrusion rather than sitting on the surface, sanding a seam or trimming a support does not expose a dull core. What you sand is what the part looked like before you sanded it, which is the property that separates a genuine material effect from a coating that fails the first time anyone touches it.

Surface is not decoration. It is the part of a print that people actually believe.


Key Features

  • ✦Metal-effect pigment carried through the full extrusion, not applied as a coating
  • ✦Smooth surface that visibly reduces layer-line contrast
  • ✦Variable luster controlled through print temperature and speed
  • ✦Impact resistance and toughness above standard PLA
  • ✦No large metal particles, so nozzle wear stays close to plain PLA
  • ✦Runs on standard PLA parameters with no new profile needed
  • ✦Identification chip read automatically by the ACE Pro

Technical Specifications

  • MaterialPLA Metal compound
  • Filament diameter1.75 mm
  • Net weight1 kg per spool
  • FormSolid
  • Colour optionsMetal Black, Metal Blue, Metal Champagne
  • Finish behaviourMetallic sheen, variable luster by temperature and speed
  • Nozzle considerationNo large metal particles, minimised nozzle wear
  • Printing profileStandard PLA parameters
  • Spool identificationChip compatible with ACE Pro
  • BrandANYCUBIC

Where It Belongs

Prop and cosplay makers use it for armour plates and mechanical greebles that need to look forged without a paint booth. Product designers print enclosures and bezels where a metallic finish has to survive being handled in a meeting. Model builders print mechanical assemblies where layer lines would otherwise betray the scale. Repair-focused makers prefer it for replacement knobs, brackets and trim, where impact resistance matters more than colour accuracy and the metal look keeps a functional part from reading as a stopgap.


Questions, Answered

Q: Do I need a hardened nozzle to print it?

No. The formula is deliberately free of large metal particles, which is the component that wears nozzles in conventional metallic filaments. Standard brass nozzles handle it at normal wear rates.

Q: Will I have to tune a new printing profile?

It runs on typical PLA parameters, so an existing PLA profile is the correct starting point. Adjust temperature and speed afterwards if you want to push the metallic contrast higher or flatter.

Q: Why does the finish change between prints?

Luster responds to thermal history. Higher temperature with slower passes deepens the metallic read; faster, cooler passes flatten it. The variation is a control, not a defect.

Q: How strong is it compared with normal PLA?

Toughness and impact resistance are enhanced relative to standard PLA, so it resists breaking under flex better than a plain PLA part of the same geometry.

Q: Does the ACE Pro really detect the spool automatically?

The spool carries an identification chip that the ACE Pro reads to pull the material information, removing the manual entry step when you load it.

Q: Is it suitable for outdoor parts?

It behaves like PLA in service, so treat it as an indoor and protected-outdoor material. Ultraviolet exposure and sustained heat remain the limiting factors for the PLA family.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
L
Linnet Z.
Same profile, different temperature, different finish

Ran a housing at higher temperature and a bezel cooler from the same spool and got two finishes that still matched in tone. That control is worth more than the colour range.

K
Kasimir H.
Brass nozzle survived the whole spool

I had avoided metallic filaments because of nozzle wear. This one ran a full kilogram on the original brass nozzle with no signs of grinding.

J
Jolanda X.
Reads as cast, not printed

Printed armour panels and the metallic finish hides the layer lines far better than standard PLA. No sanding, no primer, no paint. It just comes off the bed looking like a moulded part.

Payment and Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently Seen