Description
At 80 kilometers an hour, a trailer outline is a shared contract. Every car behind you is reading the shape of your load from the markers along its edges, and a single dead lamp on a wet night reopens the conversation about where your trailer ends and the dark begins. These LED elbow side markers keep that outline lit, continuously, in the worst weather a road can offer.
Each marker pairs a white LED for the front-facing positions and red output for the rear, in a flexible rubber housing that survives the flex, vibration and stone strikes of daily trailer service. The IP67 sealing keeps water, road salt and pressure-wash spray out of the electronics, and the multi-volt driver accepts both 12V and 24V systems, covering cars, vans, lorries, and caravans without a change of wiring.
The elbow form factor hugs the trailer corner where the standard flat lamp will not sit, mounting into the outline positions that define the rig at night. Two markers per set, simple two-wire hookup, and a light output that announces every corner of the trailer from the moment the headlights go out.
A trailer is only as visible as the lamps that trace its edges.
Key Features
- 2x LED side marker lights, polyvalent outline and clearance positions
- White LED for front-facing positions and red output for rear markers
- IP67 waterproof sealing against rain, salt and pressure washing
- Flexible rubber housing absorbs vibration and road shock
- Multi-volt 12V/24V driver, works on cars, vans, lorries and caravans
- Elbow form factor fits trailer corners where flat lamps struggle
- Direct two-wire hookup, no relay or driver box required
Technical Specifications
- Set Contents: 2 marker lights
- Light Color: White / red outputs
- Lamp Type: LED
- Waterproof Rating: IP67
- Voltage: Multi-volt, 12V / 24V
- Placement: Front, rear, left and right outline positions
- Housing: Flexible rubber, elbow profile
- Weight: 0.4 kg per unit
- Application: Truck trailers, lorries, vans, caravans
Who It Is For
For fleet operators who run trailers until the paint fades, for caravan owners who cross borders in weather that changes without warning, for commercial vehicle workshops stocking lamps that simply survive, and for anyone who has ever passed a dark trailer on the motorway and silently willed the driver to fix their lamps. The markers install with a standard two-wire connection into the trailer outline circuit and accept either polarity-reversing trailer wiring configurations when wired according to the trailer harness diagram. Because the housing is flexible rubber, the lamp follows the contour of the trailer edge instead of fighting it, which keeps the seal tight and the fitment rattle-free over rough road surfaces.
Frequently Asked Questions
Q: What voltage does this work on?
The markers are multi-volt and accept both 12V and 24V systems, so they work on cars, vans, lorries and caravans without modification.
Q: Is it really waterproof?
Yes, the housing is IP67 sealed, which means it is fully protected against dust and immersion, including the pressure-wash spray that kills lesser lamps.
Q: Where do I mount it?
The elbow profile is designed for trailer outline positions including corners where flat lamps will not sit, covering front, rear, left and right placements.
Q: Which color goes where?
Use the white output at forward-facing positions and the red output at rear-facing positions to match lighting regulations.
Q: How hard is the wiring?
It is a simple two-wire hookup. Connect to the trailer marker circuit and verify polarity, no driver box or relay required.
Q: Do the lamps comply with marker regulations?
The white and red outputs are positioned per standard trailer lighting practice, white at front-facing locations and red at the rear, matching common regulatory expectations.
Q: Are the wires long enough for trailer corners?
The lead length covers typical side-marker routing from the trailer harness. For long trailers, extend with standard automotive wire and waterproof connectors.
Q: How is this packaged for shipping?
The item is packed in protective packaging suitable for its size and weight, with the original retail presentation preserved where applicable. Tracking information is provided once the order ships.
Q: What should I do if the item is not what I expected?
Contact our support team with your order number and a short description of the issue. We handle quality concerns on a case-by-case basis and work toward a resolution that keeps you whole.
Q: How do I care for it long term?
Follow the care notes in the specification section, store it in a dry, shaded place when not in use, and give it a quick wipe or rinse after heavy use. Routine care keeps the product performing like new.
Q: Can I order replacement parts or accessories later?
The listing covers the complete set as described. If replacement or accessory items are needed later, our catalog is searchable on the storefront and new listings are added regularly.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.