What are the characteristics of the emergency stop switch?

The emergency stop switch is generally a normally closed point, and the normally closed point breaks during emergency stop. Always turn it off to check if the serial control circuit is passed, press to disconnect; if it is often turned on, then the usual emergency stop switch is broken and difficult to find, and the emergency stop cannot be used to stop the emergency stop.

ย 

What is an emergency stop switch?

ย 

  1. The emergency stop switch is a type of cam controller that operates household appliances. When the equipment is in a dangerous state, disconnect the power supply according to the emergency stop switch, terminate the operation of the equipment, and maintain personal safety and equipment safety.

ย 

  1. The "emergency stop switch" is usually a manually controlled squeeze switch (the function key is bright red), which is connected to the control circuit of the connected device. In an emergency, it immediately cuts off the switching power of the control circuit, and then quickly terminates the device to prevent abnormal operation.

ย 

ย 

ย 

ย 

  1. What are the characteristics of emergency stop switch?

ย 

  1. Good sealing performance, can be used in extreme conditions such as coal bed methane, dust, dense smoke, water vapor, etc.;

ย 

  1. Both sides are equipped with plastic drawstrings. After the sensor is in position, lock the release lever and pop up, and perform manual calibration;

ย 

  1. The switch has four groups of outlets, two of which are the introduction of the main cable. lead to the entrance; in addition, two self-connecting sensors or signal receivers;

ย 

What are the specifications of the emergency stop switch and the characteristics of the switch? I believe you have a certain understanding after reading it. Emergency stop switches are also very common in everyone's life. Learning more about expertise can help them in their future lives.

Leave a comment

All comments are moderated before being published