Low Intensity Dry Drum Magnetic Separator

【Capacity】: 1-180TPH
【Procesible Material】: iron, ilmenite, limonite, hematite , magnetite, manganese , chrome ore, coltan ore separation, etc.

Advantages

【Description】 :
Dry Drum Magnetic separator is one of the most widely used and versatile machines in mineral processing. Mineral technologies electrostatic separators suitable for manganese ore, magnetite, pyrrhotite, roasting ore, ilmenite, hematite and other materials below 50mm granularity, dry magnetic separator and wet drum magnetic separator.

【Application】:
1. For pre-separating at magnetic separation plants, to remove stones mixed in ores, restoring the geologic grade of ores, saving energy and increasing the treatment capacity of the plant.
2. Used in mining stope to recover iron ore from waste stones and improve resource utilization rate.
3. For slag treatment at steel mills to recover metal iron.
4. For garbage disposal to separate and recover usable metal which would be helpful to the environment.

【Features】:
1. Magnetic intensity is adjustable.
2. Science structure, lightweight, reliable operation, easy maintenance.
3. One machine can be with a single drum, double drums or three drums.
4. The dry process, increase separation efficiency.

Product Structure

【Dry Drum Magnetic Separator working principle】Under the action of water flow, the ore particles are in a loose state. The magnetic field causes the magnetic ore particles to magnetically form a "magnet", and the concentrate is concentrated on the cylinder. Non-magnetic or weakly magnetic minerals are left in the slurry with the slurry exiting the trough, which is the tailings.
【Maintenance】The drive belt should be adjusted to the proper position. If the belt is found to be seriously worn, replace the belt with the same length; If the permanent magnet cylinder of the dry magnetic separator is found to be detached, the glue should be re-attached; Check if there are any iron and other debris in the box, and find it immediately after processing; Check the lubricating oil of each lubrication point and replenish it in time.

Technical Parameters

Model	Shell diameter(mm)	Shell length(mm)	Shell rotation speed(r/min)	Feeding size(mm)	Processing capacity(t/h)	Power(kw)
CTB4060	400	600	48	2-0	0.5-1	1.1
CTB6012	600	1200	<35	2-0	10-20	1.5
CTB6018	600	1800	<35	2-0	15-30	2.2
CTB7518	750	1800	<35	2-0	20-45	2.2
CTB9018	900	1800	<35	3-0	40-60	3
CTB9021	900	2100	<35	3-0	45-60	3
CTB9024	900	2400	<28	3-0	45-70	4
CTB1018	1050	1800	<20	3-0	50-75	5.5
CTB1021	1050	2100	<20	3-0	50-100	5.5
CTB1024	1050	2400	<20	3-0	60-120	5.5
CTB1218	1200	1800	<18	3-0	80-140	5.5
CTB1224	1200	2400	<18	3-0	85-180	7.5
CTB1230	1200	3000	<18	3-0	100-180	7.5