1. PETG Filament Features & Parameter:

PETG Filament Features:

1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent
The toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks
And warping.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable
Co-print all kinds of commonly used models, crafts, industry
Pieces, advertising words, etc.

PETG Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.35KG/roll
Length: 1.75MM(1KG)=320M,
3.0MM(1KG)=105M

2. PLA Filament Features & Parameter:

PLA Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and strong rigidity;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork and industrial design samples
Grade

PLA Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.35KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

3. SILK Filament Features & Parameter:

SILK Filament Features:

1. Environmentally friendly, non-toxic, biodegradable;
2. Close to silk effect;
3. Low shrinkage
4. Toughness 50 times higher than PLA on the market
Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork, industrial design samples
And product models with higher toughness requirements, etc.

SILK Product Parameter:

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Pull force (KGF): 6-8
Melt index: 5-10g/10min
(190℃, 2.16kg)
Elongation at break: 200%
Printing speed: 30-60MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=330M

Estimated Delivery Time

* Oversea warehouse about 3-7days;

* China shipment about 18-35days, If you buy up to 10 rolls, we will send you fast shipping.

SHIPPING

* You can check any tracking number through this website:https://www.17track.net/zh-cn,or just leave message to us,then we will check the tracking number for you.

* We will ship your order in 1-4 bussiness days,and provide tracking number as soon as possible.

CONTACT US

* If you do not receive the goods within the estimated time,or there are any problems with the goods,please feel free to contact us,we will refund you or send you the goods agian for free.

* We have a factory,which means we will continue to offer preferential prices and high quality products,and we will provide pre-sales and after-sales service, so do not worry about any after-sales problems.

Notice

1.Affected by factors such as light, filter, placement angle, etc., there may be slight color difference between the picture and the actual product.

2.The latest batch of products arriving in overseas warehouses are all neutral packaging (Without SUNLU logo). New and old packaging will be sent randomly.