What is a High Flow Filter

High flow means the use of a smaller number of filter elements, reducing labor and operating costs. The high flow filter elements produced by China National Filter Environmental Protection are durable, with high efficiency, low pressure loss and long use time.

High flow filter, known as high flow water filter element, high flow filter element, high flow filter, high flow pleated filter element, etc., usually adopts PP inner and outer skeletons, and the filter layer is made of protective nets, non-woven fabrics, filter membranes and other materials The composition can be adapted to most water treatment conditions.

The large diameter design of the domestic high flow filter element increases the effective filter area, which can greatly reduce the number of filter elements and reduce the size of the housing. Designed for a variety of containers, these containers can hold 1 to 37 filter elements, which can be used for a variety of flow requirements,  as well as a competitive price advantage.

General information of High Flow Filter element as below,

Length: 20inch（50.8cm）, 40inch（101.6cm）, 60inch（152.4cm）---Can also be customized according to needs;
Outer diameter: 7inch(17.78cm)---On-demand customization;
Micron Rating: 1μm 5μm 10μm 15μm 20μm 40μm 70μm 100μm---Can be adjusted at any time according to working conditions;
Filter area: 20inch---4-5㎡,40inch---8-10㎡,60inch---12-15㎡;
Filter Media: Polypropylene, Glass Fiber;
Outer Cage & End Caps: Polypropylene;
Filter form: In and out, Outside In and out---Different forms of filtration have different water inlet directions;
Initial pressure difference: 0.02MPa;
Replace the pressure drop: 0.25MPa;
Maximum pressure drop: 0.35MPa;
Flow Rate(Imperial): 375GPM 500GPM;
Gasket/o-ring material: EPDM , Silicone, Viton, Buna-N;
Maximum Operating Temperature(Celsius): 80℃.

About the structure of the high flow filter element, Brother Filtration High-Flow Filter are taken as an example.

End cap: high-strength PP polypropylene end cap;

Filter layer: protective mesh layer, non-woven layer, high-precision filter membrane and other filter materials are evenly distributed and arranged;

Connection: The whole body does not contain any glue, and all the connection parts are glued in the form of ultrasonic

hot melt to ensure strength and prevent secondary pollution;

Sealing part: select nitrile rubber, fluorine rubber, silicone, etc. according to the working conditions, with superior anti-aging performance;

Process:Inner core for high mechanical strength, outer cage to protect the pleated media;

Frame: special customized one-piece high-strength pp frame, equipped both inside and outside to ensure the compression resistance of the filter element.

Structural characteristics of High Flow Filter

1.Higher Work Efficiency. The combination of surface filtration and deep filtration can greatly reduce the number of filter elements compared with ordinary filter elements, and significantly

2.reduce the size of the matching housing, reduce the number of filter element replacements and unnecessary losses during use, and improve work efficiency.Longer Service Life but Lower Production Costs---The foldable design increases the filter area and makes the pressure drop significantly lower than the ordinary filter element; the large diameter design increases the dirt holding capacity, prolongs the service life, and reduces the production cost.

3.Easy to Install. The convenient handle design significantly reduces the time to replace the filter element, making the replacement of the filter element simple and portable.

Unique radial pleated design facilitates high flow capacity and takes up less space than competing filter elements.

Horizontal design option simplifies the operation to the greatest extent, meanwhile vertical design can minimize the footprint of the system.

Produces a flow rate of up to 500gpm in a single filter element, so fewer components are required.

As widely used in a variety of fields, it may always match your expectations.

1) Seawater desalination pretreatment

2) Filtration of power plant condensate

3) Filtration of raw materials, solvents and water in the bio-pharmaceutical industry

4) Filtration of bottled water, sugar liquid, edible oil, fruit juice, soft drink, milk

5) Paint, coating, petrochemical industry

6) Microelectronics, film, fiber, resin

Brother Filter Cartridges Catalog(Still being updated)

Unique radial pleated design facilitates high flow capacity and takes up less space than competing filter elements.

Horizontal design option simplifies the operation to the greatest extent, meanwhile vertical design can minimize the footprint of the system.

Produces a flow rate of up to 500gpm in a single filter element, so fewer components are required.

As widely used in a variety of fields, it may always match your expectations.

1) Seawater desalination pretreatment

2) Filtration of power plant condensate

3) Filtration of raw materials, solvents and water in the bio-pharmaceutical industry

4) Filtration of bottled water, sugar liquid, edible oil, fruit juice, soft drink, milk

5) Paint, coating, petrochemical industry

6) Microelectronics, film, fiber, resin

Brother Filter Cartridges Catalog(Still being updated)

Unique radial pleated design facilitates high flow capacity and takes up less space than competing filter elements.

Horizontal design option simplifies the operation to the greatest extent, meanwhile vertical design can minimize the footprint of the system.

Produces a flow rate of up to 500gpm in a single filter element, so fewer components are required.

As widely used in a variety of fields, it may always match your expectations.

1) Seawater desalination pretreatment

2) Filtration of power plant condensate

3) Filtration of raw materials, solvents and water in the bio-pharmaceutical industry

4) Filtration of bottled water, sugar liquid, edible oil, fruit juice, soft drink, milk

5) Paint, coating, petrochemical industry

6) Microelectronics, film, fiber, resin

Brother Filter Cartridges Catalog(Still being updated)