YE-Q2 Automatic Tube Cutting Machine

The double head automatic tube chamfering machine is a horizontal machine. It drives the transmission shaft by a double servo motor. This machine can automatically chamfer copper aluminum pipe with different diameters and thicknesses on both sides. Internal and external chamfer are available.

Compared with the traditional manual chamfering machine, the YE-Z1 machine can handle the pipe correctly, standardized, and efficiently. Machines give you more returns and profits.

Overview
YE-Z1 double head automatic tube chamfering machine adopts vibration plate feeder working system, take the pipe by three pneumatic vices, hold the material with a clamp. The Servo motor system is controlled by PLC. Transmission shaft with drive the knife to chamfer. The maximum pipe diameter is 50 square mm. Length from 7 mm to 52 mm.

An optimal combination of proven state-of-the-art components leads to outstanding productivity.

The vibration plate controls feeding.
Control by PLC, accurate and stable.
The cutter head adopts a taper type, which is easy to grind.

Technical Parameters

project	Technical parameters
The power supply voltage	380v 50Hz
The external air pressure	0.6-0.8MPa
The workpiece length	7-52mm
Machining diameter	pipe tube 1.5sqmm to 300sqmm
Processing speed	Processing times 30 to 40 times per minute
The length of tolerance	±0.05mm
The motor power	0.75KW/1.1KW
Spindle speed	1400r/min.2800r/min
Feeding way	automatic vabition
Processing range	Suitable for copper tube and alliumin tube . Inside. Outside. Two head chamfering flat bar
Machine size/weight	1220mm*800mm*1430mm/400kg

 

Manufactures Description

The YE-Q2 automatic tube cutting machine is a fully automatic cutting machine with a touch operation panel.

When the processing size changes, just change the size in the text display to work, without manual positioning or hardware positioning. And automatic tube cutting machine is suitable for cutting round tube, square tube, rectangular tubes, and all kinds of special-shaped tubes and bar.

●: Circular solid tube is made of copper, brass, and aluminum with a bore diameter of ∅40 mm.

■: Square solid tube is made of copper, brass, and aluminum with a diameter of 50*50 mm.

○: Circular hollow tube is made of copper, brass, and aluminum with a bore diameter of ∅120 mm.

┕: L solid tube is made of copper, brass, and aluminum with a diameter of 115*115 mm.

□: Square hollow tube is made of copper, brass, and aluminum with a diameter of 110*110 mm.

▃: Square solid tube is made of copper, brass, and aluminum with a diameter of 110*50 mm.