XTOOL D9SPRO Automotive Diagnostic With a large 9.7-inch screen and dual WIFI modules for stable data transfer between the tablet and VCI. Designed for mechanics, electricians and automotive repair stores, it Added FCA Autoauth Function, Full-System Automotive Diagnostics, Live Data, Bi-directional Control test, ECU Coding and ECU Programming, 45+ Common Special Functions, Intelligent Topology Mapping, Refresh Hidden Functions, IMMO & Key Programming, 3 Years Software Updates. With 98% vehicle coverage and compatibility with over 100 brands and 10,000 car models, XTOOL D9SPRO Bluetooth Diagnostic Tool is a versatile and reliable tool for any automotive professional.

🥇XTOOL D9SPRO BEST FOR GARAGE, CAR DEALER, WORKSHOPS, TECHNICIAN

ALL SYSTEMS DIAGNOSTICS

XTOOL D9SPRO scanner can scan all available vehicle systems like Engine, Trans, ABS, Airbag, Brake, Body, Chassis, HVAC, Radio and etc to perform dealer-level diagnostics: read/clear DTCs, data stream & graphing like fuel trims/misfire/trans oil temp/ mass airflow/ clutch sensors/ O2 sensors/ ABS speed sensors, export data as CSV, and active tests(bidirectional controls), retrieve freeze frame & ECU info and turn off warning lights/reset monitors on various systems.

FULL BI-DIRECTIONAL CONTROLS

XTOOL D9SPRO Car Diagnostic Tools is a full bi-directional control scan tool that can command car ECUs to perform various active tests like, Injector Tests, Fuel Injector Balance, Compression Test, Cooling Fan, A/C Clutch On/Off, ABS Motor Pump, Windows/ Wipers/Sunroof/Doors, to provide in-depth diagnostic tests and pinpoint fault causes like locating bad injector efficiently & accurately.
Note: Active Tests available vary across vehicles. Older vehicles tend to have less tests available

COMMONLY-USED 45+ MAINTENANCE SERVICES

XTOOL D9SPRO Automotive Scanner Performs 45+ comprehensive service functions including oil reset, EPB, SAS, DPF, Throttle, BMS, ABS Bleed, injector coding, key fobs programming, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Zero Point Calibration, Fuel Injector Balance, Language Change, Stop/Start Reset, A/F Reset, etc.

Note: Do NOT work on all cars. Please check compatibility before purchase!

PROFESSIONAL IMMO & KEY PROGRAMMING

XTOOL KC501 Key Programming Adapter has been extended IMMO functionalities on For BMW CAS4/3/2/1, For Benz FEM/BDC and For VW Group 4th/5th IMMO etc., It designed to work with XTOOL D9SPRO, IP919PRO, X100MAX Immobilizer Tool to perform various IMMO Key Programmings, key chip Programming functions, MCU writing and reading ,etc. Read PIN (All Key Lost), Key Learning, IMMO ECU Reset/Adaption, IMMO ECU Refresh/Coding, Remote Learning...

ADDED FCA AUTOAUTH Functions(NEW)

XTOOL D9SPRO Automotive Diagnostic Scanner supports access to the Security Gateway Module on 2018 and For Fiat/Chrysler/Dodge vehicles so that diagnostic tools can clear codes, run bi-directional active tests, drive, relearn and even IMMO passwords Key programming (PIN extraction and writing), ECU encoding, initialization, ADAS calibration assistance, etc. (No Need FCA 12+8 Cable).
Note: The buyer is required to register an FCA account, any charges have nothing to do with the seller.

SUPPORT CAN FD/DOIP PROTOCOLS

XTOOL D9SPRO Automotive Diagnostic Tool with CAN FD Protocol covers for GM MY2020+ models. No extra CAN FD adapter needed. With DoIP Protocol covers for BMW E/F/G Chassis/Jaguar/Land Rover vehicle makes. It can work on 88+ car brands, 140+ models and 10,000 cars globally, including 12V sedans, light duty trucks, SUVs, mini vans, hybrids. With software updates, the vehicle coverage grows continuously!

INTELLIGENT TOPOLOGY MAPPING CAPABILITY

XTOOL D9SPRO smart Car diagnostic tool features Module Topology to scan all available car modules and show color coded diagnosis status in tree mapping that reveals the underlying communication structures between modules, greatly improved Repair Efficiency for Workshops.

ADVANCED PRE-SCAN AND POST-SCAN & DIAGNOSTIC REPORT 2.0

Experience unparalleled vehicle diagnostics with our upgraded Advanced Pre-Scan and Post-Scan features. XTOOL D9SPRO Bluetooth Scanner ensures precise fault detection by identifying error DTCs and potential system issues before repairs. The post-scan confirms all faults are resolved, ensuring optimal vehicle performance. The Upgraded Diagnostic Report 2.0 enables you to create comprehensive reports with four types, an icon display for main systems, and a customizable layout with your shop's logo. Enjoy categorizing and merging reports, adding client information, all while streamlining diagnostics to enhance customer satisfaction.

SUPPORTS 23 KINDS OF LANGUAGE & 10000+ VEHICLE COVERAGE

English, Spanish, French, German, Polish, Portuguese, Russian, Danish, Greek, Persian, Finnish, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Swedish, Thai, Arabic, Turkish, Vietnamese, Traditional Chinese.
NOTE: English is default language, if you need other language, please contact seller with S/N.

PREMIUM HARDWARE CONFIGURATION

🔥FCA Auto Auth🔥Support CAN FD/Do IP🔥Intelligent Topology Map🔥Pre-Scan and Post-Scan3 Years Software Update🔥Android 10.0 systems🔥9.7'' Touch Screen🔥6400mAh 7.3V Battery🔥1024*768 Resolution🔥Quad-Core 1.5GHz CPU Processor🔥4G+128G

🥇XTOOL D9SPRO HIGH-END ONLINE ECU PROGRAMMER

XTOOL D9SPRO diagnostic scan tool can perform Online ECU Programming on BMW, Mercedes Benz, Volkswagen, Offline ECU Programming on Ford, Lincoln, Mazda and ECU Coding on Volkswagen, Audi, Skoda and etc to program/reflash ECUs, perform Online Calibrations, Online Parameterizations, and customize car settings.

🔷Perform Online ECU programming on ECM, PCM, BCM of specific BMW, Mercedes, VW, to: Replace the existing software, firmware in the ECU; Program/reflash new modules after ECU replacement; Fix software-controlled driving performance and emission issues.

🔷Perform Offline ECU Programming on specific Ford, Lincoln and Mazda, to: Copy the codes from old module to the new one when you have swapped the ECU/Module from a doner car; Perform Programmable Module Installation(PMI) to reprograms the adaptive data for certain components after repairs or replacements.

🥇XTOOL D9SPRO ADVANCED ECU CODING (ONLINE CODING) FUNCTION

Used to reflash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements. You can use our XTOOL D9SPRO to stimulate all the possibilities of the vehicles.

After we replace control units, bad actuators, or certain parts we need to do the coding to make the replaced parts being stored and recognized by the ECU. Almost all systems that include engine, fuel, injector, gear shift, ABS, airbag system, and so on can be coded with this scanner. Before the coding, please read and record the original module’s information.

Including: Recode Changed Modules; Optimize Vehicle Performance; Re-Flash Hidden Functions; Renew ECUs Coordination; Reprogram; Adaptive Data; Improve Fuel Efficiency; Reduce Power Loss; Improve the Durability of Mechanical Parts, etc.

🥇XTOOL D9SPRO OE LEVEL ALL SYSTEMS DIAGNOSTICS

With Topology Map for faster full system diagnostic to view the communication structure between modules clearly with all the situation of each system tp read/clear codes, live data PIDs graphing for all vehicle systems including Engine, Transmission, Chassis and Safety control system, Body control system, Communication and Entertainment system, etc.

🥇XTOOL D9SPRO INTELLIGENT TOPOLOGY MAPPING CHANGE EVERYTHING

XTOOL D9SPRO Car Diagnostic Scanner Topology Mapping provides a clear and intuitive panoramic view of the vehicle's electronic system, helping technicians quickly understand and analyze the vehicle's electronic system structure. Graphical module layout simplifies the inspection and maintenance process of complex systems, reducing manual operations and guesswork. When a fault occurs, the affected modules and their relationship to other systems can be quickly identified, thus speeding up fault diagnosis.

🔷Equipped with color coded module status for faster full system diagnostic results.

🔷View the communication structure between modules clearly with all the situation of each system.

🔷One click to display the fault code and enter the system executive function directly.

Note: Topology Map Compatibility For GM/CHRYSLER/JEEP/DODGE/FORD/TOYOTA/NISSAN/HONDA/BMW/BENZ/HYUNDAI/MAZDA (MORE COMING SOON). DO NOT available for All Vehicle Makes. Please come to us for compatibility check.

🥇XTOOL D9SPRO BI-DIRECTIONAL CONTROL /ACTIVE TESTS

XTOOL D9SPRO bi-directional scanner with ECU codding, allows you to receive information to and from the vehicle’s onboard computer and can send commands to the vehicle ECU to perform active tests without using the vehicle's controls, like A/C Clutch on/off, Fuel Injectors, (Cycling) ABS Pump Motor, window, door, sunroof, etc. That’s helpful for DIY mechanics, speeding up the troubleshooting process when it’s time to make repairs. Accurately figure out whether a specific system, component, or a subsystem in vehicles goes well and locate the problem by interactively operating and testing the vehicle's related actuators. such as:

🔷ACM Test, Radiator Fan Test
🔷A/C Clutch On/Off, Fuel Pump On/Off
🔷Windows/Door Locks/Horn, etc.

🥇XTOOL D9SPRO 45+ COMMONLY-USED MAINTENANCE /RESET/RELEARN FUNCTIONS

🔷ECU Configuration: Re-flash the hidden function of the car and customize the vehicle as need.

🔷 ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.

🔷Fuel Trim Reset: Reset the fuel trims provides for a chance that your adaptive fuel map could become stable.

🔷Immobilizer: Disable a lost vehicle key to protect the vehicle from being stolen and add the new key.

🔷Oil Reset: Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.

🔷EPB: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.

🔷BMS Match: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.

🔷DPF Regeneration: Clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

🔷 Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.

🔷 SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.

🔷Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

🔷 Airbag Repair: After replacing the Airbag, reset the Airbag data and clear the collision data.

Also Including: TPMS Reset, Air Suspension, Crank Sensor Relearn, Gearbox (Transmission) Match, Headlight Adjustment, Window Initialization, Seat Configurations, Power Balance, Coolant Bleeding, Disable Transportation, Tire Size Reset, A/F Reset, Start/Stop Reset, Language Change, Transmission Service Fast Relearn, Fuel Injector Balance, Crankshaft Sensors Relearn, Idle Learn, Zero- Point Calibration, Fuel Alcohol Composition Reset, Actuator Calibration Test, WCS Reset, VIN Registration(Write), Injector Balance Rate Programming, etc. are all available.

🥇XTOOL D9SPRO KEY GENERATOR WITH POWERFUL KEY PROGRAMMING FUNCTION

XTOOL D9SPRO Key Fob Programmer can disable a lost vehicle key and program the replacement key fob. One or more replacement key fobs can be programmed. like programming new key fobs, Read PIN code/pin code calculation, Check number of keys, Generate key, Add key, All key lost.

🔷Work with EEPROM Adapter
🔷Read/write/backup the IMMO data.
🔷Read PIN code
🔷Add New Keys (Fob/Smart)
🔷Remote Learning
🔷 Key Matching
🔷Remote Learn
🔷 ALL KEYS LOST Functions, etc.

NOTE: Key programming does not work on all cars, please check the compatibility before purchase.

🥇XTOOL D9SPRO IMMOBILIZER TOOL COMPATIBLE WITH VARIOUS ACCESSORIES

KC501:
🔷For VW 4th & 5th IMMO
🔷For Mercedes-Benz Infrared key Increase
🔷Read & Write Chip

KC100:
🔷For VW/Audi/Skoda/Seat/Bentley
🔷For 4th&5th, MQB IMMO

M822:
🔷For Mercedes-Benz All Key Lost
🔷For Toyota 8A AIl Key Lost

KS01:
🔷For Toyota Smart Key All Key Lost
🔷For 94 Chip Smart Key

SK1:
🔷For 2013-2022 Toyota/Lexus Models With 8A/4A Chip Smart Keys
🔷Add Key/All Keys Lost
🔷Emergency Start
🔷Frequency & Key Type Reading

🥇XTOOL D9SPRO ADVANCED PRE-SCAN AND POST-SCAN & DIAGNOSTIC REPORT 2.0

XTOOL D9SPRO Bluetooth Scanner ensures precise fault detection by identifying error DTCs and potential system issues before repairs. The post-scan confirms all faults are resolved, ensuring optimal vehicle performance. The Upgraded Diagnostic Report 2.0 enables you to create comprehensive reports with four types, an icon display for main systems, and a customizable layout with your shop's logo. Enjoy categorizing and merging reports, adding client information, all while streamlining diagnostics to enhance customer satisfaction.

🔷PRE SCAN: Can read the vehicle’s current fault codes and stored historical fault codes. These fault codes will provide initial clues to potential problems in the vehicle's systems. Help technicians and car owners understand the current health status of the vehicle and provide guidance for repairs.

🔷POST SCAN: After repair or maintenance is completed, use the diagnostic equipment to scan the vehicle again to ensure that all fault codes have been cleared and the vehicle system is normal. Make sure all issues are resolved, the vehicle is in top condition after repairs, and avoid hidden problems.

🥇XTOOL D9SPRO MORE PROFESSIONAL FUNCTION TO IMPROVE YOUR EFFICIENCY

🔷Reflash Hidden Functions
To unlock features that are not available to vehicle previously out of auto factories like rear-view mirror folding, and disable annoying features that are disturbing while driving seat belt alarm, max speed limiter, etc. for BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/MAZDA/FORD/LINCOLN Only, Check with us before purchase!

🔷ADDED FCA AUTOAUTH Functions(NEW)
supports access to the Security Gateway Module on 2018 and For Fiat/Chrysler/Dodge vehicles so that diagnostic tools can clear codes, run bi-directional active tests, drive, relearn and even IMMO passwords Key programming (PIN extraction and writing), ECU encoding, initialization, etc. (No Need FCA 12+8 Cable).Note: The buyer is required to register an FCA account, any charges have nothing to do with the seller.

🔷Support CAN FD & DoIP Protocol
Supports DoIP & CAN FD protocol vehicles for much faster data transfer rates, compatible with newer vehicles that are CAN FD (for GM 2020+ vehicles) & DoIP protocol(for BMW E/F/G Chassis, for Jaguar, for Land Rover etc. vehicle makes) ,saving you tons of money on buying adapters, and no more worry about connector loss.

🔷Intelligent Topology Map
XTOOL D9SPRO intelligent diagnostic tool has a module topology, which can scan all available car modules, and the topology map displays the diagnostic status in different colors, showing the communication structure between modules, which greatly improves the maintenance efficiency of the workshop.

🔷For VAG Guided Functions
XTOOL D9SPRO Diagnostic Tools can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/Audi/Skoda, etc

🔷Wireless WiFi Connection Diagnostics
XTOOL D9SPRO Bluetooth Diagnostic Tool offers wireless connection feature to achieve remote diagnosis at a long wireless range, get rid of the shackles of cables, Wireless WIFI diagnosis work is more efficient, convenient and stable. (The WIFI connection distance from the vehicle is about 30-100M)

🔷3 Years Software Updates for All Functions
XTOOL D9SPRO automotive diagnostic tool comes with 3 Years Software Updates to continuously expand vehicle coverage, add newly developed features, improve interact experience and fix software glitches. You can use the last update software programs even if you choose not to renew subscription! No more worry about the function disappearing or being locked.

🥇XTOOL D9SPRO DIAGNOSTIC SCANNER WIDE COVERAGE FOR 99.9% VEHICLES, INCLUDING DOIP, CAN FD, FCA PROTOCOL VEHICLES

XTOOL D9SPRO diagnostic tablet can work on 10,000 vehicles globally to perform all systems diagnostics and emission check, Up to 2025, 2024, including cars, SUVs, minvans, 12v light-duty trucks, including for GM 2020+ vehicles that are CAN FD compliant, for BMW E/F/G Chassis / Jaguar / Land Rover vehicle makes that are DoIP protocol compliant and 99.9% OBDII/EOBD vehicles for emission check.

For American Vehicles: For BUICK, For CADILLAC, For CHEVROLET, For CHRYSLER, For DODGE, For FIAT(BRAZIL), For FORD(USA), For GM, For GMC, For HUMMER, For JEEP, For LINCOLI, For SATIRN.

For European Vehicles: For ABARTH, For ALFA ROMEO, For ASTONMARTIN, For AUDI, For BENZ, For BMW, For BUGATTI, For CITROEN , For DACIA, For FERRARI, For EUROFORD, For FIAT, For GAZ, For JAGUAR, For LAMBORGHINI, For LANCIA, For LANDROVE, For MASERATI, For MAYBACH, For MINI, For OPEL, For PEUGEOT, For POLESTAR, DFCIAUXHALL, For VOLVO, For VW, For VW-CV.

For Asian Vehicles: For ACURA, For DAEWOO, For DAIHATSU, For HONDA, For HYUNDAI, For HYUNDAICV , For INFINITI, For ISUZU, For KIA, For LEXUS, For LUXGEN, For MAZDA, For MITSUBISHI, For NISSAN, For GT-R(NISSAN, For PERODUA, For PERODUA, For PROTON, For RENAULTSAMSUNG, For SCION, For SSANGYONG, For SUBARU, For SUZUKI, For TLISUZU, For TOYOTA

For Chinese Vehicles: For BAOJUN, For BRILLANCE, For BYD, For CHANGANFORD, For CHANGHE, For CHERY, For CHINA MAZDA, For DFCITROEN, For DFPEUGEOT, For FAW AUDI, For FAW VW, For GAC GONGW, For GEELY, For GEELY MONJARO, For GREAT WALL, For JAC, For LIFAN, For MAXUS, For MG, For ROEWE, For SGMW, For ZHONGHUA

For Australia Vehicles: For FORD(AU), For HOLDEN

Brazilian Cars: For FIAT of Brazilian, For GM of Brazilian

🥇XTOOL D9SPRO SUPPORTS 23 KINDS OF LANGUAGE

English, Spanish, French, German, Polish, Portuguese, Russian, Danish, Greek, Persian, Finnish, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Swedish, Thai, Arabic, Turkish, Vietnamese, Traditional Chinese.

🥇XTOOL D9SPRO PREMIUM HARDWARE CONFIGURATION

OS System: Android 10.0
Processor: 4 Core Processor 1.5GHz
Storage: 4G+128G
Battery: 6400mAh
Display: 9.7-inch Capacitive,
Resolution: 1024×768 Resolution
Connectivity: USB/Wi-Fi (2.4GHz & 5GHz Dual-Frequency)
Output: Microphone/ Loudspeaker
Ports: USB3.0/DC charging port/VGA port/DOIP Port