🎁How to Win F-ree G-ifts ?

Please note that all g-ifts will be sent after you give us a p-ositive review. Please contact the seller promptly after leaving five stars.

LAUNCH X431 CRP129E PLUS Car Full Systems EOBD OBD2 Scanner Diagnostic Tool 8 Reset Services Auto VIN Scan Battery Test Lifetime Free Update

4. Choose the desired time zone, and tap “Next” to enter the WLAN setup page.
5. Slide the switch to ON, the system starts searching for all available wireless
LANs. Choose the desired WLAN access point / network,
• If the network you chose is open, you can connect directly;
• If the selected network is encrypted, you have to enter the right security
key (network password).

6. After the network connection is done, tap “Next Step” to configure email address. Input the email address, and tap “Next Step” to go to next step.
Note: You are strongly recommended to fill in the valid email address. Once you configured this option, the system will automatically send the diagnostic report to your email box every time a complete Auto-Detect process is successfully finished.
7. Carefully read all terms and conditions of the user agreement, check the box before the “Agree to all the above terms”, and tap “OK” finish the sign-up process and navigate to Job Menu.

All-In-One Full Diagnostics Scan Tool, Upgraded Version of CRP123E / CRP129E:

System Diagnosis:

This function is specially designed to diagnose electronic control systems of single vehicle model.

Full vehicle systems with basic diagnostic functions are supported for all preinstalled vehicle diagnostic software.

Notes:
• To extend the pre-installed vehicle diagnostic software with basic functions to full functions, user can go to Mall -> Full function to subscribe it.
• If the test vehicle is not covered by pre-installed vehicle software, go to Mall ->
Software to subscribe the target software.

Smart Diagnosis (Auto-Detect):

This function allows you to quickly access the electronic control systems of the vehicle via decoding the VIN, without manual step-by-step menu selection.After connection, turn the ignition key on and the system enters auto-detect mode.

Notes:
• Please make sure the “Automatic detection on connect” in “Settings” is set as ON.
• A highly stable and solid network connection is recommended for successful VIN
access.

Once the system successfully obtains the VIN (Vehicle Identification Number) information of the currently identified vehicle, it will continue scanning the vehicle systems. After the scanning is complete, a diagnostic report will be
automatically generated and sent to your email box (if bound).

Manual Diagnosis:

If the tool can not obtain the VIN information, you can also perform vehicle diagnosis manually. In this mode, you need to execute the menu-driven
command and then follow the on-screen instruction to proceed.

Notes:
• Before diagnosing, please make sure the diagnostic program corresponding to certain
vehicle model has been installed on your tool.
• The diagnostic menu may vary by the vehicle’s make, model and year.

Maximize your efficiency and profitability with our CRP129E PLUS diagnostic tool

For SRS System: SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic tool can detect every electronic parameter to check its health status.

For Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation.

For Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined.

For Fuel system if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions.

For Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly.

For Light System if you see rapid signal blinking or dimming lights. And more...

Provide Full OBDII Diagnosis:

This option presents a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status prior to
emissions certification testing, verify repairs, and perform a number of other services that are emission-related.

1. Read Codes
This function can identify which section of the emission control system has malfunctioned.

2. Erase Codes
This function erases the codes from the vehicle, after retrieving codes from the vehicle and certain repairs have been carried out.
Make sure the vehicle’s ignition key is in the ON position with the engine off before the operation.

3. I/M Readiness
This function checks whether or not the various emissions-related systems on the vehicle are operating properly, and are ready for Inspection and Maintenance testing.
It can also be used to check the Monitor Run Status, and to confirm if the repair of a car fault has been performed correctly.

4. Data Stream
This function retrieves and displays live data and parameters from the vehicle’s ECU.

5. View Freeze Frame
This function takes the snapshot of the operating conditions when an emissionrelated fault occurs.
Note: If DTCs were erased, Freeze Data may not be stored in vehicle memory depending on vehicle.

6. O2 Sensor Test
This function retrieves O2 sensor monitor test results of the most recently completed tests from the vehicle’s on-board computer.

7. On-Board Monitor Test
This function retrieves test results for emission-related powertrain components and systems that are not continuously monitored. The test’s availability is determined by the vehicle manufacturer.

8. EVAP System Test
This function lets you initiate a leak test for the vehicle’s EVAP system. Refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.

9. Vehicle Info
This function retrieves a list of information (provided by the vehicle manufacturer)
from the vehicle’s on-board computer.

CRP129E PLUS Provide 8 Resets:

It offers coding, reset, relearn and more service functions, to help vehicles get back to functional status after repair or replacement.

***BMS Reset function
1. Main battery is replaced. 2. Battery monitoring sensor is replaced.

***Injector Coding function?
1. Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity. 2. After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.

***D-P-F Regeneration function?
1.The ECU is replaced and the ECU does not yet store throttle working features. 2. The throttle assembly is replaced or the throttle is cleaned. 3. The intake pipe is replaced or removed. 4. After replacing the throttle assembly, you need to match the throttle.

***SAS Reset function?
1. After replacing the steering angle position sensor, steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering the car body, use CRP129I to reset the steering angle.

***TPMS Reset function?
1. After replacing tire sensors,reset tire pressure and turn off the tire pressure MIL.

***Throttle Adaptation function?
1. The exhaust back pressure sensor is replaced. 2. The PM trap is removed or replaced. 3. The fuel additive nozzle is removed or replaced. 4. The catalytic oxidizer is removed or replaced. 5. The D-P-F regeneration MIL is on and maintenance is performed. 6. The D-P-F regeneration control module is replaced.

***Oil Reset function?
1.If the service light is on, you will need to reset the drive mileage so that the service light turns off. 2. After changing engine oil or electric appliances that monitor oil life, you need to reset the service light.

***EPB Reset function? 1. The brake pad and brake pad wear sensor are replaced. 2.Diagnoses EPB caliper functionality, initializes the wear indicator if new pads are installed and deactivates or re-activates brake control system.

Due to continuing improvements, available service functions are subject to change without prior written notice. To enjoy more service functions, you are suggested to check for updates on a regular basis.

Health Report (Quick Test):

This function varies from vehicle to vehicle. It enables you to quickly access all the electronic control units of the vehicle and generate a detailed report about vehicle health.

Super Practical 4-IN-1 Graphical Live Data OBD2 Scanner

***CRP129E PLUS full system diagnostic tool accepts all vehicle data.

ABS Live Data: View Lateral Acceleration, Longitudinal Acceleration, 4 wheels speed sensor, Yaw Rate, Brake Switch Status, ABS Warning Light, Brake Pressure Sensor, G Sensor Offset, and more.
SRS Live Data: View Driver Seatbelt, Passenger Seatbelt, Fault Status of Seat Position Sensor, Fault Status of Buckle Switch, SRS warning light, and more.
Transmission Live Data: View Oil Temperature of Transmission, Internal transmission speed, Turbine Speed, Start Enable Transmission, ATF Temperature Sensor, Current Gear Position, Next Gear Position, Engine Torque Reduction Demand Flag, and more.
TPMS Live Data: View Tire Pressure, ID Code Sensor Tire, Temperature in Tire, Tire Pressure Threshold, Tire Pressure Sensor Battery, and more.
Engine Live Data: View RPM, Oil Temperature, Engine Coolant Temperature, Vehicle Speed, Absolute Throttle Position, Calculated Load Value, Ignition Timing Advance Cylinder, Intake Air Temperature, and more.

***4-IN-1 Live Data Graphic

Live Data Stream Graphing provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor1, Actual Output Shaft Speed, Clutch A Actuator Motor, Vehicle Battery, and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it.
Live Data Stream Record allows you to record the live data stream and view the data of a certain point in a targeted manner. So that you can view the data more clearly.
Live Data Stream Playback can recorded the data for a period of time, if you want to view and analyze the data just recorded, you need to use data stream playback function to help you. You can view the data at any time you recorded. Then you can choose " Combine", " Report" and " Record".
Live Data Stream Sharing will let you share any data status and content you want to display anytime, anywhere. You can send it to your friend or mechanic to help you solve complex problems.

***ALL-IN-ONE diagnostic scanner scan tool,

Display Live Data in Value, Graph, and Merged
Value – this is the default mode that displays the parameters in texts and shows in list format.
Graph – displays the parameters in waveform graphs. Combine – this option is mostly used in graph merge status for data comparison. In this case, different items are marked in different colors.

Update:

This function allows you to update the diagnostic app and software.

If some new software or APK can be updated, a numeric indicator will display on the “Upgrade” module on the Job menu. In this case, you may use this option to keep it synchronized with the latest version.

History function ：

Generally once a vehicle diagnosis is performed, the tool will record the every details of diagnostic session. The History function provides direct access to the previously tested vehicles and users can resume from the last operation, without
starting from scratch.

Other Functions of CRP129E PLUS:

Diagnostic Report: This module stores the running parameters or waveform graphs the user
records.

Diagnostic Record: This module stores all diagnostic reports generated in the process of vehicle diagnosis.

DTC Library: This function helps you to get the details of the DTC, which will greatly help
simplify the diagnostic process.

DLC(Data Link Connector) Location: This function helps you to find the location of the vehicle’s DLC.

Feedback: This item allows you to send the feedback of your diagnostic problems to us for
further analysis and troubleshooting.

Image: This option allows you to view and manage all screenshots. All screenshots
created in the vehicle diagnostic work will be saved in this module.

Firmware Fix: Use this module to upgrade and fix diagnostic firmware. During fixing, please do
not cut power or switch to other interfaces.

Google Online Search: You can browse the google to find more solution of car's malfunction.

Real-Time Battery Voltage Test: Allowing you monitor vehicle battery voltage automatically with reliable real-time graph data. It helps you to determine the battery's health status, get early warnings for possible battery and the charging system's problem.

Vehicle Coverage:

This tool is specially designed to work with all OBD II compliant vehicles, including Controller Area Network (CAN). It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all American, Asian and European vehicles.

A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the following:
1. Vehicle Emissions Control Information (VECI) Label. It is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate OBD II Certified.

2. Government regulations mandate that all OBD II compliant vehicles musthave a “common” 16-pin Data Link Connector (DLC).

Note: Some 1994 and 1995 vehicles have 16-pin connectors but are not OBD II compliant. Only those vehicles with a Vehicle Emissions Control Label stating OBD II Certified are OBD II compliant.

Provide 11 Languages:

Supports 11+ menu language, on the home screen, tap Settings > System > Language & input >Languages, then you can change English to French, Spanish, German, Korean, Japanese, Portuguese, Italian, Traditional Chinese, Russian, Polish. etc.

Mall Functions:

This function allows you to subscribe other vehicle diagnostic software with full functions that are not pre-installed on the tool and extend the pre-installed
vehicle diagnostic software with basic functions to full functions.

There are two modules available:
Software: Subscribe other vehicle diagnostic software with full functions that are not pre-installed on the tool.
Full function: Extend the pre-installed vehicle diagnostic software with basic functions to full functions.

Different vehicle software is tagged with different price.Select the target software and follow the on-screen instructions to finish the
transaction.

The subscribed software can be free to use and update for one year. After it expires, it will become disabled. In this case, renew your subscription in the Mall to unlock it.

Technical Specifications:

• Screen: 5” touch screen
• RAM: 2G
• ROM: 16GB
• OBDII input voltage range: 9~18V
• Touch & Keypad input
• Charging via:
• Charging cable
• Diagnostic cable through connection to vehicle’s DLC
• Working temperature: 0 to 50°C (32 to 122 F°)
• Storage temperature: -20 to 70°C (-4 to 158 F°)

Accessories Checklist:

For detailed accessory items, please consult from the seller.
1. Diagnostic scanner
2. OBD II diagnostic cable
3. Charging cable
4. User manual
5. Carrying bag

Customer Service:

If you have any questions on the operation of the unit, please contact the seller, or customer service.

Warranty:

This warranty is expressly limited to persons who purchase LAUNCH® products for purposes of resale or use in the ordinary course of the buyer’s business.

LAUNCH®electronic product is warranted against defects in materials and workmanship for one year (12 months) from date of delivery to the user.

This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use.

The exclusive remedy for any automotive meter
found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.

Final determination of defects shall be made by LAUNCH in accordance with stipulated procedures.