UltraX-15 Closed-Loop Alcohol Extraction System

Newlabx

説明

UltraX-15 Closed-Loop Alcohol Extraction System

Our centrifuge based technology enables the ability to target and extract specific botanical compounds to achieve desired separation.The UltraX-15 ALCOHOL EXTRACTION SYSTEM combines closed-loop,cold alcohol extraction with mechanical centrifugation ensuring high-purity extractions.

Features:

Closed-Loop System
3rd Party Engineer Reviewed
UL Listed US/Canada
304 &316L Sanitary Stainless Steel
Vacuum Jacket Insulation
Easy Material Loading/Unloading
Bi-Directional Agitation
Variable Speed Control
Heavy-Duty Spin Drying
12Month Parts/Labor Warranty
Technical Support
Designed in USA

Product Overview:
The UltraX-15 combines closed-loop alcohol extraction with centrifugal technology, ensuring consistent results conveniently by a single operator. A touch screen HMI features a menu with various agitation and spin-dry cycles, each of which is programmable to the operator’s specifications. With a run time of only 10-20 Minutes and a throughput of approximately 300 lbs Per 8-hour work day, this system will efficiently attain Your processing goals.

Standard Features:
Vessel

304 and 316L Stainless Steel Construction
(1)Alcohol Feed Port:1.5” Sanitary Triclamp Fittings
(1)1.5”Tri-clamp; Remote Discharge Vent and Pressure Relief Port
2”Tri-Clamp Angled Drain
Liquid/Vapor Tight(No pressure) Vessel with EPDM Lid Seal
Footprint

UltraX-15:w/o Auxiliary components (37”L×25.5W×52”H)
Master Panel Not Shown: (24”L×32”W×52”H)
Recommended Total Footprint Of Extraction Area:UltraX, Control Panel, Tanks, Filter, Pump (15ftW×5ftD×8ftH)

Controls

Industrial Hazloc control panel
Touchscreen HMI
20ft Tethered main control panel (Installed outside of hazloc)
Emergency stop
Variable frequency drive:0-1800 RPM

Electrical

230V,30 amp, single-phase
UL certified class 1 div 2 , 3HP motor
UL-NEMAL6-R30 Plug
UL-L6-30(30A-250V)

Operation

Through the HMI,the operator may access 2 different programs: Agitation and spin-dry. Each program has three cycle presets, two of which are programmable (will save long term) and one being manual (will not save long term). To begin, the operator fills a mesh bag with botanical material and places the bag in the system. After sealing the system properly, it is than filled with alcohol and agitated using the ’Agitation’ program. When the ’Agitation’ program is complete, the operator opens the drain valve allowing the saturated alcohol to drain into an appropriate discharge container. After draining, the operator may now select the ’Spin-Dry’ program where the residual alcohol will be removed through centrifugal force.

1)Loading the System

A mesh bag is filled and packed evenly with botanical mater.The bag is then sealed with the zipper, and placed in the basket of the vessel.

2)Filling the System

The system is sealed and filled with approximately 15 gallons of alcohol, which may be done either pneumatically(with a pump+ air compressor) or with gaseous nitrogen.

3)Agitation

The ’Agitation’ program bi-directionally spins the basket with the botanical material and alcohol, extracting approximately 98% of the target compounds.

4)Draining

When the ’Agitation’ program is Complete, the drain valve is opened to allow the alcohol to drain into an appropriate discharge container.

5)Spin-Dry

Leaving the drain valve open, the ’Spin-dry’ program is chosen and the basket is spun at high speeds to centrifugally remove approximately 97% of any residual alcohol.

6)System Unloading

Once the ’Spin-Dry’ program is finished and the basket has stopped spinning, the lid may be opened and the bag removed. The botanical matter has now been stripped of its target compounds and may be disposed of properly.

7)Repeat

The system is loaded again and the same 15 gallons of alcohol may be re-used for multiple extractions until fully saturated (approximately 3 bags or 45 lbs)

지불 및 보안

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

당신은 또한 좋아할 수 있습니다

최근 본