Descrizione
The space under a sink is the worst-shaped storage in any home: interrupted by a trap, a pipe and a shut-off valve, and usually filled with a single row of bottles that cannot be reached without removing the front ones.
The Undersink Vault works around the obstruction instead of pretending it is not there. Two tiers stack vertically, leaving a clear channel at the back for the trap and pipework, and the lower basket slides out on a rail so the back of the cabinet becomes reachable. That single change is why this format replaced the static caddy almost everywhere it was tried.
The build is a rigid polymer frame with ventilated basket walls, which matters under a sink where damp collects. Air moves through the sides, so a sponge or a cloth that goes in wet does not sit in a puddle. The frame carries its load on the base of the cabinet rather than hanging from the pipe, which is the failure mode of every strap-mounted under-sink shelf.
It ships with a hanging cup and two hooks that clip to the side rail, sized for a brush, a scraper or a pair of gloves. The whole unit takes about a minute to assemble and needs no tools and no fixings, which is what makes it usable in a rented kitchen.
The cabinet does not need more space. It needs the back of it to be reachable.
Two Tiers, One Pull
- ✦Two-tier frame with a rear channel that clears the sink trap and pipework.
- ✦Lower basket on a sliding rail, so the back of the cabinet is reachable without unloading.
- ✦Rigid polymer frame that carries load on the cabinet base rather than the pipe.
- ✦Ventilated basket walls for airflow in a damp under-sink environment.
- ✦Clip-on hanging cup and two hooks for brushes, scrapers or gloves.
- ✦Tool-free assembly in about a minute, with no fixings required.
- ✦Fits kitchen and bathroom cabinets, and works in a rented unit without drilling.
Dimensions & Load
- TiersTwo
- FrameRigid polymer, ventilated baskets
- MovementLower tier slides on rail
- Rear clearanceChannel for trap and pipework
- AccessoriesHanging cup, two hooks
- AssemblyTool-free, approx. one minute
- InstallFreestanding, no fixings
- UseKitchen or bathroom cabinet
- LoadCleaning bottles, sponges, cloths, small tools
- CareWipe clean, air dry
Cabinet Scenarios
Under a kitchen sink it holds the cleaning bottles that currently live in a front row, with the cloths and sponges in the hanging cup and the back tier clear for the trap. In a bathroom cabinet it does the same job for shampoo, shower cleaner and spare soap, where the pipe is usually a pedestal waste rather than a trap. It is also useful in a utility cupboard or under a laundry sink, and because it needs no fixings it can be lifted out and reconfigured whenever the cabinet contents change.
Fit Questions
Will it fit around my sink trap?
The rear channel is designed for a standard trap and the supply pipework beside it. Measure the widest point of your trap and the depth of the cabinet from the back wall to the door before ordering. The frame needs the lower basket to slide clear of the door, so cabinet depth matters as much as width.
How much weight will it hold?
The frame carries load on the cabinet base, so it takes the weight of a normal under-sink inventory: cleaning bottles, a spray bottle, sponges and cloths. It is not designed for bulk containers of liquid or for anything that needs to be lifted as a single heavy unit.
Does the lower tier slide out fully?
It slides far enough to reach the back of the basket, which is the practical requirement. It is a rail rather than a drawer runner, so it does not extend past the cabinet edge. On a shallow cabinet that means the basket needs to come out of the door opening to load the rear section.
Can it be used in a bathroom cabinet?
Yes, and it is arguably more useful there because bathroom cabinets are usually deeper and narrower than kitchen ones. The ventilated walls help with the humidity around a shower or a bath, and the hanging cup holds a spare sponge or a razor without occupying the basket floor.
Is any drilling or fixing required?
None. The unit is freestanding and assembles by clipping the frame together, which is why it works in a rented property or a cabinet you do not want to put screws into. If the cabinet floor is uneven, a small shim under one corner stops the sliding tier from drifting.
Dispatched from the EastSupplier network with tracked shipping and a 30-day return window. Every listing is documented, photographed and priced upfront, so what arrives is what you ordered.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.