Descrizione
Batteries do not die suddenly. They die slowly, from the way they are fed. A stock charger fills a pack with current and walks away, leaving the last ten percent to heat, gassing, and the slow structural damage that shortens cycle life. This 84W lead-acid charger was engineered for riders and engineers who treat charging as a discipline rather than an afterthought, and it shows in every stage of its output curve.
The unit delivers a precise 57.6V absorption voltage, the exact figure required by 48V lead-acid and AGM configurations, including 4x14.4V series packs. Its four-stage protection array monitors overcharge, overcurrent, reverse polarity, and short circuit, while the cooling profile stays whisper-quiet even during a full overnight cycle. That silence is not a cosmetic feature. It is the audible signature of efficient power conversion, the difference between a charger that idles at 40 degrees and one that finishes the job at a gentle hum.
For e-bike commuters, solar-bank owners, and workshop operators maintaining standby battery strings, this charger turns a routine chore into a set-and-forget operation. Connect the pack, walk away, and let the electronics hold the voltage curve where the chemistry wants it. Your battery does not know the difference between an expensive maintenance system and a well-built charger. It only knows whether the voltage arrived on time, at the right level, and stopped at the right moment. This charger always arrives on time.
This is not a power supply. It is a battery's retirement plan, deferred.
Key Features
- ✦ 84W output with precise 57.6V absorption voltage for 48V lead-acid and AGM packs
- ✦ 2A steady charging current matched to long-cycle battery chemistry
- ✦ Four-stage protection: overcharge, overcurrent, reverse polarity, and short circuit
- ✦ Silent cooling profile for overnight and garage charging sessions
- ✦ Compatible with 4x14.4V series configurations and 57.6V e-bike packs
- ✦ Durable housing rated for workshop, garage, and mobile use
Technical Specifications
- Output Power: 84W
- Output Current: 2A
- Absorption Voltage: 57.6V DC
- Compatible Packs: 48V lead-acid, AGM, and 4x14.4V series configurations
- Protection: Overcharge, overcurrent, reverse polarity, short circuit
- Cooling: Silent passive airflow design
- Applications: E-bikes, solar storage banks, standby battery strings
- Input: Standard 100-240V AC mains
Application Scenarios
An e-bike commuter plugs in after a long ride and lets the four-stage curve finish the job overnight. A solar workshop keeps its battery bank topped at the precise voltage its cells prefer, extending the string years beyond the warranty sticker. A fleet manager maintains a shelf of 48V packs with one charger that never forgets where to stop. From city garages to off-grid sheds, this charger is the quiet partner behind batteries that keep their promise.
Frequently Asked Questions
Q: Will this charger work with my 48V e-bike battery?
A: Yes, it delivers the 57.6V absorption voltage required by 48V lead-acid and AGM packs, including e-bike configurations wired as 4x14.4V series strings.
Q: Is it safe to leave connected overnight?
A: Yes. The four-stage protection array and automatic cutoff prevent overcharge, so the charger can be left connected for full overnight cycles without supervision.
Q: How loud is it during charging?
A: The cooling design is effectively silent. Users consistently describe it as a gentle hum at most, which makes it suitable for garages and living spaces.
Q: Can it maintain a solar battery bank?
A: Absolutely. The stable voltage curve is well suited to standby maintenance of 48V lead-acid and AGM strings used in solar storage systems.
Q: What happens if the polarity is reversed?
A: The reverse polarity protection engages immediately and prevents current flow, protecting both the charger and the battery from damage.
Q: How do I know when the battery is fully charged?
A: The charger automatically switches to a maintenance state when the pack reaches absorption voltage, holding the charge without overfeeding the cells.
Q: Can it charge AGM and gel batteries too?
A: Yes, the 57.6V absorption profile suits both AGM and gel lead-acid chemistries, which share the same voltage envelope as standard flooded packs.
Q: What size battery pack does the 2A output suit?
A: The 2A output is matched to 48V packs in the typical 20-40Ah range, the standard sizing for e-bikes and small solar banks, charging overnight at a gentle rate.
Q: Does it come with the AC power cable?
A: Yes, the charger ships with the mains input cable ready for standard wall outlets, along with the output leads for the battery pack.
Q: Is it safe to charge indoors?
A: Yes. The sealed, ventilated housing and automatic cutoff make indoor charging safe when the unit is placed on a flat, non-flammable surface with clear airflow.
Q: Does the charger work with all 48V lead-acid brands?
A: Yes, the 57.6V absorption profile is chemistry-based rather than brand-specific, so it works across flooded, AGM, and gel 48V packs from any manufacturer.
The EastSupplier Promise
This product is part of the EastSupplier catalog, where every item is inspected before dispatch, packed with care, and shipped from warehouses serving North America, Europe, and beyond. Sixteen years of cross-border supply chain experience stand behind each order. If anything is not right, our support team makes it right quickly. That is not a slogan. It is the operating manual.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.