Descrizione
LS300 is fully automatic C section steel production equipment, which is mainly composed of the decoiler, feeding and leveling device, pre-punching device, pre-shear, Roll forming machine, Post cutting ,run out table, PLC and Hydraulic station. The web size can be adjusted from 75-300mm any size. The finished products of C-beam rolled by this machine has good bending resistance, good straightness. The machine is automatic length cutting, automatic punching, and easy installation. This product can be used as the main load-bearing structure of large and medium-sized industrial and civil buildings, such as workshops, warehouses, stadiums and other roofing load-bearing and wall leveling support.
Flow chart: Decoiler→ Feeding and leveling →Pre-cutting →Roll forming→ Post punching→ Hydraulic cutting→ product support frame
Machine Specifications | |
Weight | About 8500 KG |
Main Machine Size | About 11.5m x1.65m x 1.7m
(length x width x height) |
Color | Main color: blue |
Warning color: yellow and orange | |
Suitable Raw Material | |
Material | cold rolled coil , hot rolled coil, galvanized coil |
Thickness | 1.0-3.0mm |
Coil width | According to products size |
Yield strength | Q195,Q235,Q345 |
Main Technical Parameters | |
Quantity of forming rollers stations | 15-16 Stations |
Diameter of rollers | ø160MM |
Diameter of shafts | ø75/ø80mm |
Roll Forming Speed | 0-25m/min |
Production Speed | 12-16m/min(depends on quantity of punching) |
Forming rollers material | CR12 mould steel, with quenched treatment |
Cutter material | CR12 mould steel, with quenched treatment |
Controlling system | PLC and Converter |
Electric power requirement | Main motor power: 18.5KW |
Hydraulic unit motor power: 7.5KW | |
Electric voltage | According to customers requirement |
지불 및 보안
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.