The Volt Bridge | 140W PD Fast-Charge Adapter for DeWalt 18V Battery Platform

Economisez 20%
EastSupplier PlatformSKU: 1005008147465052-Default Title

Prix:
$69.83 $87.29

Frais de port calculés au paiement

Stock:
En stock

Description

A battery is only as versatile as the tools it powers. The DeWalt 18V platform is the workhorse of job sites worldwide — rugged, reliable, and omnipresent in the kits of tradesmen who demand tools that survive. Yet the energy stored in those lithium-ion cells has always been held captive: locked into DeWalt's proprietary ecosystem, unable to charge the phone in your pocket, the laptop on your tailgate, or the tablet running your job estimates.

The Volt Bridge changes the architecture of power. By adapting the DeWalt 18V/20V MAX battery interface to a USB-C Power Delivery port capable of 140W output, it transforms every DeWalt battery on your truck into a portable power station. Charge a MacBook Pro at full speed. Fast-charge two smartphones simultaneously via the dual USB-C and USB-A ports. Power a portable monitor for on-site blueprint review. The intelligent power management IC negotiates the optimal charging protocol with each connected device — USB PD 3.1, QC 3.0, PPS, AFC, SCP — ensuring safe, efficient power transfer regardless of brand or device generation.

This is not a gadget. It is infrastructure for the mobile professional — a bridge between the power tools that build and the digital tools that coordinate. The integrated LED display shows remaining battery voltage in real time, and the built-in safety protections guard against over-current, over-voltage, over-temperature, and short circuits. When the grid is out of reach, your DeWalt batteries become the grid.

Key Features

  • ✦ 140W USB-C Power Delivery output — charges laptops, tablets, and phones at full speed
  • ✦ Dual-port output: 1× USB-C (140W PD 3.1) + 1× USB-A (18W QC 3.0)
  • ✦ Compatible with DeWalt 18V/20V MAX lithium-ion batteries (DCB series)
  • ✦ Multi-protocol charging: PD 3.1, QC 3.0, PPS, AFC, SCP, Apple 2.4A
  • ✦ Real-time LED voltage display with low-battery warning
  • ✦ 6-layer safety protection: over-current, over-voltage, over-temperature, short circuit, reverse polarity, over-discharge
  • ✦ Compact, job-site-ready ABS+PC housing with rubberized grip

Technical Specifications

  • Input Source: DeWalt 18V / 20V MAX lithium-ion battery (DCB series)
  • USB-C Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A, 28V/5A (140W max, PD 3.1)
  • USB-A Output: 5V/3A, 9V/2A, 12V/1.5A (18W max, QC 3.0)
  • Combined Output: Up to 140W total (intelligent power distribution)
  • Charging Protocols: PD 3.1, PPS, QC 3.0, AFC, SCP, FCP, Apple 2.4A, BC1.2
  • Display: LED voltage readout (0.1V resolution)
  • Protection: OCP, OVP, OTP, SCP, reverse polarity, over-discharge cutoff
  • Housing Material: ABS + PC flame-retardant composite
  • Compatible Batteries: DCB180, DCB181, DCB182, DCB183, DCB184, DCB185, DCB200, DCB201, DCB203, DCB204, DCB205, DCB206, DCB208, and aftermarket equivalents
  • Dimensions: Approximately 110mm × 80mm × 45mm

Application Scenarios

The Volt Bridge is built for the job-site professional who runs a laptop in the truck between site visits — one DeWalt 5Ah battery can charge a MacBook Pro from 0-50% or fully recharge a modern smartphone 4-5 times. For the remote contractor working where grid power is unreliable or absent, it eliminates the need for a separate portable power station; the batteries already in your tool bag become your charging infrastructure. Field service technicians running diagnostic tablets and mobile printers for work orders gain hours of cordless runtime from batteries they already carry. The dual-port design means you can charge a phone and a secondary device simultaneously — a Bluetooth speaker for the job site, a tablet for blueprint consultation, or a headlamp battery for evening work. For emergency preparedness, keeping a charged DeWalt battery and the Volt Bridge in your vehicle means you are never without communication power, regardless of grid status.

Frequently Asked Questions

Q: Will this work with my third-party/aftermarket DeWalt-compatible batteries?

A: The Volt Bridge is designed for the DeWalt 18V/20V MAX battery interface. Most quality aftermarket batteries that correctly replicate the Dewalt slide-pack interface will function. However, we recommend using genuine DeWalt batteries for guaranteed compatibility and safety — counterfeit battery cells can trigger the over-temperature protection and may deliver inconsistent voltage.

Q: Can it charge my MacBook Pro at full speed?

A: Yes. The 140W USB-C PD 3.1 output supports the full 28V/5A profile used by the 16-inch MacBook Pro (2021+). A fully charged DeWalt DCB205 (5Ah) battery can deliver approximately 90Wh of energy — enough to charge a MacBook Pro 16" from 0% to approximately 60-65%.

Q: Does it drain the battery when nothing is connected?

A: The Volt Bridge has near-zero standby drain. It includes a physical power switch — turn it off when not in use to completely isolate the battery. The LED voltage display activates only when the adapter is powered on.

Q: What happens when the battery voltage drops too low?

A: The over-discharge protection monitors input voltage. When the battery reaches approximately 15V (3.0V per cell for a 5S pack), the adapter automatically cuts output to protect the battery from deep discharge damage. The LED display will flash to indicate low battery before cutoff.

Q: Can I use this with DeWalt FlexVolt 60V batteries?

A: FlexVolt batteries in 20V MAX mode (when used on 20V tools) are compatible. The Volt Bridge draws from the standard 18V/20V contacts. In 60V mode, the battery's internal switching prevents output — ensure the battery is set for 20V operation by connecting it to a 20V tool first if switching from 60V mode.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Ming L.
Works great with genuine DeWalt, mixed with aftermarket

With my genuine DeWalt DCB205 batteries it works flawlessly — full 140W output to my laptop. I also tried it with two aftermarket batteries. One worked perfectly, the other triggered the over-temperature protection after about 15 minutes of use. Not the adapter's fault — it's doing its job protecting itself. Just a heads up that cheap batteries may cause it to shut down. The unit itself is well-designed and the LED voltage display is accurate within 0.1V compared to my multimeter.

T
Tyler H.
Every contractor should have one of these

I bought this before a 3-day remote job with no grid power. Charged my phone 4 times, my tablet twice, and still had battery left on a single 5Ah pack. The dual-port design means I can charge my phone and run a portable fan simultaneously. It's basically a portable power station that uses batteries I already own. Build quality feels solid — the rubberized grip is a nice touch.

C
Carlos V.
Game changer for the job site

I do residential electrical work and my laptop is always dying mid-estimate. This adapter lets me charge my MacBook from the same DeWalt batteries I already carry five of. The 140W output actually charges at full speed — I tested it with a USB-C power meter and it hits the full 28V/5A profile. The voltage display on the unit is genuinely useful for checking which batteries have charge left.

지불 및 보안

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

당신은 또한 좋아할 수 있습니다

최근 본