The Vacuum Core HL-15V | Oil-Free Miniature Negative Pressure Pump for Lab & Beauty Equipment

Economisez 20%
East Supplier PlatformSKU: 1005003604877413-110V

Color: 110V
Prix:
$44.30 $55.38

Frais de port calculés au paiement

Stock:
94 en stock, prêts à être livrés

Description

Vacuum is not the absence of something. It is the presence of control. In every laboratory protocol, every beauty device, every medical apparatus that relies on negative pressure, the pump is the heartbeat — and a heartbeat should be silent, clean, and relentless. The Vacuum Core HL-15V is an oil-free miniature diaphragm pump engineered to deliver precisely that: continuous negative pressure without lubricant contamination, without thermal drift, and without the maintenance burden of rotary-vane alternatives.

The oil-free design is the defining architectural decision. Traditional vacuum pumps bathe their internals in oil for sealing and cooling, but that oil atomizes, migrates into the vacuum line, and contaminates whatever sensitive process lives downstream. In aesthetic medicine — hydrafacial machines, microdermabrasion devices, vacuum therapy systems — oil contamination is not a flaw; it is a contraindication. The HL-15V eliminates the variable entirely by using a PTFE-coated diaphragm that creates negative pressure through reciprocating displacement, requiring no oil and producing output clean enough for direct patient contact equipment.

Dual-voltage compatibility (110V/220V) and a compact 2.8-kilogram chassis make the HL-15V equally deployable in a North American aesthetic clinic, a European university biology lab, or a field research station running off a portable transformer. The pump achieves -80 kPa of ultimate vacuum at a flow rate of 15 liters per minute — sufficient for suction filtration, vacuum degassing, laboratory aspiration, and pneumatic actuation in automated equipment. Quiet operation at approximately 55 dB means it runs in occupied treatment rooms without disrupting conversation or patient comfort.

Most pumps demand lubricant. This one demands only electricity.

Key Features

  • 100% Oil-Free Operation: PTFE diaphragm technology eliminates lubricant contamination risk — critical for medical, beauty, and laboratory applications
  • Dual Voltage (110V/220V): Globally compatible with automatic or manual voltage selection for deployment anywhere
  • -80 kPa Ultimate Vacuum: Deep negative pressure sufficient for filtration, aspiration, degassing, and pneumatic systems
  • 15 L/min Flow Rate: Balanced throughput for sustained operation without oversized pump selection
  • Low-Noise Design (~55 dB): Operates at conversational volume — suitable for occupied clinical and laboratory spaces
  • Compact & Portable: 2.8 kg weight with integrated carry handle for benchtop mobility
  • Minimal Maintenance: No oil changes, no vane replacements — periodic diaphragm inspection only

Technical Specifications

  • Model: HL-15V
  • Pump Type: Oil-free diaphragm (reciprocating)
  • Ultimate Vacuum: -80 kPa (-0.8 bar / -600 mmHg)
  • Flow Rate: 15 L/min (free air displacement)
  • Power: 110V/220V AC, 50/60Hz (selectable)
  • Power Consumption: Approx. 120W
  • Noise Level: ~55 dB(A) at 1 meter
  • Weight: 2.8 kg (6.2 lbs)
  • Diaphragm Material: PTFE-coated elastomer
  • Duty Cycle: Continuous operation rated

Application Scenarios

The HL-15V's oil-free architecture and compact form factor open doors across disciplines that traditional rotary-vane pumps cannot enter. Aesthetic clinics integrate it into hydrafacial and microdermabrasion systems where oil contamination would render a treatment unsafe. University biology and chemistry labs use it for vacuum filtration, rotary evaporation support, and gel drying protocols. Dental labs rely on it for vacuum-forming splints and retainers. Electronics repair stations employ it for desoldering and component rework. And medical device manufacturers integrate it as an OEM vacuum source in diagnostic and therapeutic equipment that requires clean, continuous negative pressure in a silent, maintenance-free package.

Frequently Asked Questions

Q: What makes oil-free operation important?

A: Oil-lubricated pumps atomize a fine oil mist into the vacuum line during operation. In medical aesthetics, laboratory testing, and food processing, this oil contamination can compromise results, damage sensitive equipment, or violate hygiene protocols. The HL-15V's PTFE diaphragm creates vacuum without any oil, producing a completely clean vacuum stream suitable for the most contamination-sensitive applications.

Q: Can this pump run continuously?

A: Yes. The HL-15V is rated for continuous duty operation. The diaphragm design dissipates heat effectively through the pump housing, and the absence of oil means there is no thermal degradation of lubricant to worry about during extended runs. For multi-hour protocols, simply ensure adequate ambient ventilation around the pump.

Q: How do I switch between 110V and 220V?

A: The voltage selection switch is located on the rear panel of the pump. Always verify the voltage setting matches your local mains supply before plugging in. Operating at 110V on a 220V setting (or vice versa) can damage the motor. The switch requires a flathead screwdriver or similar tool to toggle — this is by design to prevent accidental changes.

Q: What maintenance does this pump require?

A: Significantly less than rotary-vane alternatives. No oil changes — ever. The PTFE diaphragm should be inspected annually for wear (cracking, stiffening, or discoloration) and replaced if degraded. The inlet filter, if equipped, should be checked monthly and cleaned or replaced as needed. That is the entirety of the maintenance schedule.

Q: Is this pump suitable for vacuum therapy / cupping machines?

A: Yes. The oil-free output and -80 kPa ultimate vacuum make it directly suitable for vacuum therapy, cupping, and body contouring equipment. The clean vacuum stream meets the hygiene requirements for direct and indirect patient contact in aesthetic and therapeutic contexts. Always follow your equipment manufacturer's specifications for vacuum source requirements.

Q: How loud is it in practice?

A: At approximately 55 dB at 1 meter, the HL-15V produces sound comparable to a quiet conversation or a refrigerator hum. In a treatment room or laboratory, it does not interfere with verbal communication. If extreme quiet is required (e.g., sleep labs), the pump can be placed inside a ventilated cabinet or behind acoustic baffling with no impact on vacuum performance.

Customer Reviews

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
C
Chen W.
Excellent for desoldering and SMD rework

I built a custom desoldering station around this pump and it pulls through solder wick effortlessly. The continuous duty rating is real — I've had it running for 4+ hours during a PCB rework session with no noticeable change in vacuum pressure. The compact size fits neatly under my workbench. Much cleaner than the oil-filled pump I retired.

O
Omar F.
Compact and quiet, perfect for dental lab vacuum forming

I use this for vacuum-forming retainers and mouthguards in my dental lab. The -80 kPa is more than sufficient for our thermoforming machine. It's small enough to sit on the bench next to the former without taking up floor space. The only reason for 4 stars: the inlet fitting is a standard barb — I had to buy a separate adapter for our quick-connect hose system. Pump performance itself is flawless.

Y
Yuki T.
Reliable vacuum filtration pump for our biology lab

We use three of these in our university teaching lab for vacuum filtration experiments. Students operate them all day without issues. The 110/220V switch made deployment across different lab benches trivial. Vacuum holds steady even during multi-hour protocols. Much simpler than the oil-sealed pumps we used before — no oil changes, no contamination worries.

D
Dr. Amin K.
Perfect vacuum source for our clinic's hydrafacial machine

We replaced a noisy rotary-vane pump with this HL-15V and the difference is night and day. Patients actually commented on how quiet the treatment room is now. Oil-free output gives me peace of mind for direct patient contact equipment. Pulls consistent -80 kPa without fluctuation. Two months of daily use and zero maintenance. Highly recommend for aesthetic practices.

지불 및 보안

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

당신은 또한 좋아할 수 있습니다

최근 본