The Signal Cube | 100W TPA3116 Bluetooth 5.0 Mini Amplifier

Economisez 20%
East Supplier PlatformSKU: 1005001780065720-Without Power Supply-China Mainland

Color: Without Power Supply
Prix:
$50.81 $63.51

Frais de port calculés au paiement

Stock:
En stock

Description

Most stereo systems fail at the same point: the amplifier is the size of a suitcase, and every room that wants good sound is smaller than the amplifier expects. The NS-01G Pro answers that with a 78 millimetre anodised block that weighs 154 grams and delivers fifty watts into each of two channels. It is not a compromise device that happens to be small. It is a Class D design built around a TPA3116 chip, and that chip is the reason the numbers are believable rather than marketing.

The TPA3116 is a well-documented amplifier stage, and what matters is not the chip alone but what surrounds it: the input filtering, the power path and the thermal envelope. Douk Audio houses it in machined aluminium, which does double duty as a heatsink and a shield, and terminates the outputs on banana jacks rather than the flimsy spring clips that most amplifiers at this price rely on. Inputs are Bluetooth 5.0, USB and a 3.5 mm auxiliary jack, so the same box can take a phone across the room, a laptop on the desk or a television with a headphone output. USB input is plug and play with no driver, which is the sort of small decision that separates a device that gets used from one that gets returned.

A word about the power supply, because it is the honest part of this listing. The amplifier can be ordered with or without a 19 V supply. Without one, you supply your own DC source between 9 and 24 volts, and the rated output scales with the voltage you feed it. With one, the unit arrives ready to plug in. Neither version is a trick: it is simply an acknowledgement that a bench user may already own the correct supply, while a gift buyer does not. Drive a pair of efficient bookshelf speakers at four to eight ohms and this cube will fill a study, a workshop or a small living room with a clarity that has no audible noise floor at normal listening levels.

Good sound is not a large object. It is a short signal path and enough headroom.

Key Features

  • ✦ 50 W per channel into 4 to 8 ohms from a TPA3116 Class D stage, 100 W total.
  • ✦ Bluetooth 5.0, USB audio and 3.5 mm AUX inputs on the same small chassis.
  • ✦ Machined aluminium case works as heatsink and shield, in black, silver, gold, blue or red.
  • ✦ Banana speaker jacks instead of spring clips, so cables stay connected and can be swapped.
  • ✦ Accepts DC 9 to 24 V, with an optional 19 V supply for buyers who do not have one.
  • ✦ 78 x 70 x 38 mm and 154 g, small enough to sit behind a monitor or on a shelf edge.
  • ✦ USB input is driver-free and Bluetooth pairs without an app, so it works on any phone or laptop.

Technical Specifications

  • Brand: Douk Audio
  • Model: NS-01G Pro
  • Amplifier chip: TPA3116 Class D
  • Output: 50 W x 2, 100 W total
  • Channels: 2.0 stereo
  • Speaker impedance: 4 to 8 ohms
  • Inputs: Bluetooth 5.0, USB, 3.5 mm AUX
  • Outputs: banana speaker jacks
  • Power supply: DC 9 to 24 V, 19 V supply optional
  • Dimensions: 78 x 70 x 38 mm
  • Net weight: 154 g
  • Case: aluminium, five colour options
  • Certification: CE
  • In the box: amplifier, AUX cable, USB cable, power supply if selected

Where It Belongs

This amplifier earns its place in rooms where a full hi-fi rack will never fit. It drives a pair of bookshelf speakers on a desk, replaces the dead amplifier inside an old console stereo, gives a workshop or garage a sound source that survives dust and cold, and turns a pair of passive ceiling speakers into a Bluetooth zone without a receiver. It is also the practical fix for a television whose built-in speakers are unintelligible: a 3.5 mm cable from the set into the cube, two speakers behind the sofa, and dialogue becomes audible again. Installers use it for small commercial spaces, clinics and studios where a discrete box on a shelf is preferable to visible equipment.

Questions Buyers Ask

Q: What is the difference between the two versions?

A: One includes a 19 V DC power supply and one does not. The amplifier itself is identical. Choose the version with the supply unless you already own a suitable 9 to 24 V adapter with the right plug.

Q: Can it drive large floorstanding speakers?

A: It will drive them, but 50 W per channel suits efficient bookshelf and ceiling speakers best. Very low impedance or low efficiency floor speakers will run out of headroom before they run out of volume.

Q: Does the Bluetooth input work with an iPhone and a laptop at once?

A: It pairs with one device at a time. Switching between a phone and a laptop means disconnecting one and pairing the other, which takes a few seconds. The USB and AUX inputs remain available for a second source.

Q: Is there a subwoofer output?

A: No. This is a 2.0 stereo amplifier with two speaker outputs. If you need a subwoofer, feed the amplifier from a source with its own crossover or add an active subwoofer with high-level inputs.

Q: Will it get hot?

A: Warm, not hot, at normal listening levels. The aluminium case is the heatsink, so it should sit in open air rather than inside a closed drawer. If it becomes uncomfortably hot to hold, the supply voltage is too high for the load.

Q: How loud is it in practice?

A: With efficient bookshelf speakers it fills a normal room well before the volume control is at the top. In a small study, expect usable output from roughly the first third of the dial.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
S
Sebastian C.
USB input is genuinely plug and play

Plugged the USB cable into my laptop and it appeared as an audio device with no driver install. Switched to Bluetooth for my phone and pairing took a couple of seconds. The machined case looks better in person than in the listing photos.

O
Octavia T.
Great for a desk, no subwoofer output

Sound is clear and it fits behind my monitor without taking any desk space. My only complaint is that there is no sub out, so I had to feed my active sub from the source instead. For a desk setup with bookshelf speakers it does everything I need.

N
Nicolette V.
Drives bookshelf speakers with no audible noise floor

Connected two 8 ohm bookshelf speakers and a phone over Bluetooth. At normal listening volume there is no hiss or hum at all, and the aluminium case is only warm after an hour. The banana jacks are a real improvement over the spring clips on my old amplifier.

Payment and Security

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

You may also like

Recently Seen