Description
A Projector Is Only as Stable as the Surface Beneath It.
We have all seen it: the carefully calibrated presentation, the room gone dark, the image perfectly aligned — and then someone bumps the folding table and everything slides three degrees off-axis. Or the outdoor movie night where the projector sits on a stack of books that the evening dew slowly warps into a parallelogram. The Projection Tower eliminates the weakest link in every projection setup: the assumption that a flat, stable, correctly-elevated surface will be available wherever you need to project an image. It will not. Bring your own.
This is not a camera tripod repurposed for a projector tray. The Projection Tower is engineered for the specific load profile of a projector or laptop: a broad, non-slip platform that accommodates devices up to 40cm wide, supported by telescoping aluminum legs with a 145cm maximum working height and a stable 80cm minimum. The boom arm extension shifts the center of mass forward for edge-of-table projection — an essential feature for conference rooms where the tripod must sit behind the audience while the projector reaches forward over empty space. The quick-release leg locks deploy in under 10 seconds and lock with cam levers, not screw collars — no threading, no cross-threading, no stripped threads on site.
We designed the platform to be genuinely flat. The MDF tray surface is milled to within 0.5mm flatness tolerance — a projector sitting on a warped tray projects a trapezoidal image that manual keystone correction can only partially compensate for. The built-in bubble level lets you confirm before you power on. The result: arrive, deploy, level, project. No books, no folding tables, no compromises.
A $2,000 projector on a $20 folding table is a $20 image. Give it the foundation it deserves.
Key Features
- ✦ 145cm Maximum Working Height — Telescoping aluminum legs with 3-section extension; reaches above seated audience sightlines
- ✦ Boom Arm Extension — Articulated arm extends platform forward for edge-of-table positioning; ideal for rear-row projector placement in conference rooms
- ✦ Precision-Milled MDF Platform — 40cm × 30cm tray with 0.5mm flatness tolerance; non-slip surface with safety retention lip
- ✦ Cam-Lever Leg Locks — Quick-release deployment under 10 seconds; no screw threading to strip or cross-thread
- ✦ Built-In Bubble Level — Verify platform flatness before powering on; eliminates keystone correction guesswork
- ✦ Dual-Use Platform — Accommodates projectors, laptops, small monitors, speakers, and document cameras up to 15 kg
- ✦ Collapsible to 80cm — Folds to compact transport size; includes carry bag with shoulder strap
Technical Specifications
- Maximum Height: 145 cm
- Minimum Height: 80 cm
- Platform Dimensions: 40 × 30 cm (MDF tray)
- Platform Flatness: ±0.5 mm
- Maximum Load: 15 kg (33 lbs)
- Leg Material: Aluminum alloy, 3-section telescoping
- Leg Lock Type: Cam-lever quick release
- Boom Arm Extension: Included; articulating joint
- Level Indicator: Integrated bubble level
- Included Accessories: Carry bag with shoulder strap, safety retention strap
Application Scenarios
The Projection Tower solves the deployment problem across surprisingly varied environments. Corporate trainers and conference presenters who arrive at unfamiliar rooms — the tripod replaces the uncertainty of "will there be a table at the right height?" with a known, repeatable setup. Backyard cinema enthusiasts who project onto garage doors, exterior walls, or portable screens — the 145cm height clears lawn chairs and blankets, and the leveling bubble ensures a rectangular image on surfaces that are often anything but flat. Mobile DJs and event producers use the platform for laptops running Serato or lighting control software — the boom arm keeps the laptop accessible while the tripod base stays behind the booth. Photographers and videographers repurpose it as a portable tethering station, with the MDF platform holding a laptop running Capture One while the camera is on a separate tripod nearby. Any scenario where a stable elevated platform is needed and the venue's furniture cannot be trusted — the Projection Tower is the answer.
Frequently Asked Questions
Q: Can this hold a heavy projector — like a large venue Epson or Panasonic?
A: The platform is rated for 15 kg (33 lbs), which covers virtually all consumer and prosumer projectors. Large venue installation projectors (Christie, Barco) that weigh 20+ kg exceed the rating — for those, a permanent ceiling mount is the appropriate solution.
Q: Does the boom arm sag under load?
A: The boom arm is counterbalanced by the tripod's center column and is designed for loads up to 10 kg when fully extended. For maximum stability with heavier devices (10-15 kg), position the device directly over the center column rather than at the arm's full extension.
Q: How stable is it on uneven ground like grass or gravel?
A: The three independent leg sections allow each leg to be set at a different angle and length. On a sloped lawn, extend the downhill leg further than the uphill legs, then use the bubble level to confirm the platform is horizontal. The rubber feet provide grip on hard surfaces; for soft ground, the pointed metal tips beneath the rubber caps can be exposed by unscrewing the rubber feet.
Q: Does it come with a projector mount or just a flat tray?
A: The Projection Tower includes the flat MDF platform tray. Most projectors sit directly on the tray — the non-slip surface and retention lip prevent sliding. For ceiling-mount-style projector brackets that require an upside-down mount, you would need a separate projector ceiling bracket adapter; the tray is designed for upright placement.
Q: Can I use it as a music stand or laptop stand?
A: Yes. The platform works as a standing-height laptop desk (excellent for trade show booths where you're standing and need a check-in terminal), a music stand for tablets running sheet music apps, or a speaker stand for small Bluetooth PA speakers. The 15 kg rating covers all these use cases comfortably.
Customer Reviews
지불 및 보안
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.